commits February 2019

commits@lists.open-mesh.org

1 participants
79 discussions

[batctl] master: batctl: Fix typo "reseved" -> "reserved" (5f7a0b9)
by postmaster＠open-mesh.org 16 Feb '19

16 Feb '19

Repository : ssh://git@open-mesh.org/batctl On branch : master >--------------------------------------------------------------- commit 5f7a0b948f444b39a2fbf16f14bd0ce4009db0af Author: Sven Eckelmann <sven(a)narfation.org> Date: Sat Feb 9 00:05:36 2019 +0100 batctl: Fix typo "reseved" -> "reserved" checkpatch.pl complains since commit 45e417022023 ("scripts/spelling.txt: add more spellings to spelling.txt") about an additional spelling mistake in batman-adv:` CHECK: 'reseved' may be misspelled - perhaps 'reserved'? #232: FILE: batadv_packet.h:232: + * @flags: reseved for routing relevant flags - currently always 0 Signed-off-by: Sven Eckelmann <sven(a)narfation.org> >--------------------------------------------------------------- 5f7a0b948f444b39a2fbf16f14bd0ce4009db0af batadv_packet.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/batadv_packet.h b/batadv_packet.h index 7eb2936..c99336f 100644 --- a/batadv_packet.h +++ b/batadv_packet.h @@ -229,7 +229,7 @@ struct batadv_ogm_packet { * @packet_type: batman-adv packet type, part of the general header * @version: batman-adv protocol version, part of the general header * @ttl: time to live for this packet, part of the general header - * @flags: reseved for routing relevant flags - currently always 0 + * @flags: reserved for routing relevant flags - currently always 0 * @seqno: sequence number * @orig: originator mac address * @tvlv_len: length of the appended tvlv buffer (in bytes)

1 0

[alfred] master: alfred: Sync batman_adv.h after config support (1c3d800)
by postmaster＠open-mesh.org 16 Feb '19

16 Feb '19

Repository : ssh://git@open-mesh.org/alfred On branch : master >--------------------------------------------------------------- commit 1c3d8007309dada7e624358534285beaabf8cc32 Author: Sven Eckelmann <sven(a)narfation.org> Date: Sat Feb 16 08:39:01 2019 +0100 alfred: Sync batman_adv.h after config support * Prepare framework for mesh genl config * Prepare framework for hardif genl config * Prepare framework for vlan genl config * Add aggregated_ogms mesh genl configuration * Add ap_isolation mesh/vlan genl configuration * Add bonding mesh genl configuration * Add bridge_loop_avoidance mesh genl configuration * Add distributed_arp_table mesh genl configuration * Add fragmentation mesh genl configuration * Add gateway mesh genl configuration * Add hop_penalty mesh genl configuration * Add log_level mesh genl configuration * Add multicast forceflood mesh genl configuration * Add network_coding mesh genl configuration * Add orig_interval mesh genl configuration * Add elp_interval hardif genl configuration * Add throughput_override hardif genl configuration Signed-off-by: Sven Eckelmann <sven(a)narfation.org> >--------------------------------------------------------------- 1c3d8007309dada7e624358534285beaabf8cc32 batman_adv.h | 190 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 185 insertions(+), 5 deletions(-) diff --git a/batman_adv.h b/batman_adv.h index a28e76a..305bf31 100644 --- a/batman_adv.h +++ b/batman_adv.h @@ -27,6 +27,7 @@ #define BATADV_NL_NAME "batadv" +#define BATADV_NL_MCAST_GROUP_CONFIG "config" #define BATADV_NL_MCAST_GROUP_TPMETER "tpmeter" /** @@ -139,6 +140,20 @@ enum batadv_mcast_flags_priv { }; /** + * enum batadv_gw_modes - gateway mode of node + */ +enum batadv_gw_modes { + /** @BATADV_GW_MODE_OFF: gw mode disabled */ + BATADV_GW_MODE_OFF, + + /** @BATADV_GW_MODE_CLIENT: send DHCP requests to gw servers */ + BATADV_GW_MODE_CLIENT, + + /** @BATADV_GW_MODE_SERVER: announce itself as gatway server */ + BATADV_GW_MODE_SERVER, +}; + +/** * enum batadv_nl_attrs - batman-adv netlink attributes */ enum batadv_nl_attrs { @@ -344,6 +359,138 @@ enum batadv_nl_attrs { */ BATADV_ATTR_MCAST_FLAGS_PRIV, + /** + * @BATADV_ATTR_VLANID: VLAN id on top of soft interface + */ + BATADV_ATTR_VLANID, + + /** + * @BATADV_ATTR_AGGREGATED_OGMS_ENABLED: whether the batman protocol + * messages of the mesh interface shall be aggregated or not. + */ + BATADV_ATTR_AGGREGATED_OGMS_ENABLED, + + /** + * @BATADV_ATTR_AP_ISOLATION_ENABLED: whether the data traffic going + * from a wireless client to another wireless client will be silently + * dropped. + */ + BATADV_ATTR_AP_ISOLATION_ENABLED, + + /** + * @BATADV_ATTR_ISOLATION_MARK: the isolation mark which is used to + * classify clients as "isolated" by the Extended Isolation feature. + */ + BATADV_ATTR_ISOLATION_MARK, + + /** + * @BATADV_ATTR_ISOLATION_MASK: the isolation (bit)mask which is used to + * classify clients as "isolated" by the Extended Isolation feature. + */ + BATADV_ATTR_ISOLATION_MASK, + + /** + * @BATADV_ATTR_BONDING_ENABLED: whether the data traffic going through + * the mesh will be sent using multiple interfaces at the same time. + */ + BATADV_ATTR_BONDING_ENABLED, + + /** + * @BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED: whether the bridge loop + * avoidance feature is enabled. This feature detects and avoids loops + * between the mesh and devices bridged with the soft interface + */ + BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED, + + /** + * @BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED: whether the distributed + * arp table feature is enabled. This feature uses a distributed hash + * table to answer ARP requests without flooding the request through + * the whole mesh. + */ + BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED, + + /** + * @BATADV_ATTR_FRAGMENTATION_ENABLED: whether the data traffic going + * through the mesh will be fragmented or silently discarded if the + * packet size exceeds the outgoing interface MTU. + */ + BATADV_ATTR_FRAGMENTATION_ENABLED, + + /** + * @BATADV_ATTR_GW_BANDWIDTH_DOWN: defines the download bandwidth which + * is propagated by this node if %BATADV_ATTR_GW_BANDWIDTH_MODE was set + * to 'server'. + */ + BATADV_ATTR_GW_BANDWIDTH_DOWN, + + /** + * @BATADV_ATTR_GW_BANDWIDTH_UP: defines the upload bandwidth which + * is propagated by this node if %BATADV_ATTR_GW_BANDWIDTH_MODE was set + * to 'server'. + */ + BATADV_ATTR_GW_BANDWIDTH_UP, + + /** + * @BATADV_ATTR_GW_MODE: defines the state of the gateway features. + * Possible values are specified in enum batadv_gw_modes + */ + BATADV_ATTR_GW_MODE, + + /** + * @BATADV_ATTR_GW_SEL_CLASS: defines the selection criteria this node + * will use to choose a gateway if gw_mode was set to 'client'. + */ + BATADV_ATTR_GW_SEL_CLASS, + + /** + * @BATADV_ATTR_HOP_PENALTY: defines the penalty which will be applied + * to an originator message's tq-field on every hop. + */ + BATADV_ATTR_HOP_PENALTY, + + /** + * @BATADV_ATTR_LOG_LEVEL: bitmask with to define which debug messages + * should be send to the debug log/trace ring buffer + */ + BATADV_ATTR_LOG_LEVEL, + + /** + * @BATADV_ATTR_MULTICAST_FORCEFLOOD_ENABLED: whether multicast + * optimizations should be replaced by simple broadcast-like flooding + * of multicast packets. If set to non-zero then all nodes in the mesh + * are going to use classic flooding for any multicast packet with no + * optimizations. + */ + BATADV_ATTR_MULTICAST_FORCEFLOOD_ENABLED, + + /** + * @BATADV_ATTR_NETWORK_CODING_ENABLED: whether Network Coding (using + * some magic to send fewer wifi packets but still the same content) is + * enabled or not. + */ + BATADV_ATTR_NETWORK_CODING_ENABLED, + + /** + * @BATADV_ATTR_ORIG_INTERVAL: defines the interval in milliseconds in + * which batman sends its protocol messages. + */ + BATADV_ATTR_ORIG_INTERVAL, + + /** + * @BATADV_ATTR_ELP_INTERVAL: defines the interval in milliseconds in + * which batman emits probing packets for neighbor sensing (ELP). + */ + BATADV_ATTR_ELP_INTERVAL, + + /** + * @BATADV_ATTR_THROUGHPUT_OVERRIDE: defines the throughput value to be + * used by B.A.T.M.A.N. V when estimating the link throughput using + * this interface. If the value is set to 0 then batman-adv will try to + * estimate the throughput by itself. + */ + BATADV_ATTR_THROUGHPUT_OVERRIDE, + /* add attributes above here, update the policy in netlink.c */ /** @@ -372,10 +519,14 @@ enum batadv_nl_commands { BATADV_CMD_UNSPEC, /** - * @BATADV_CMD_GET_MESH_INFO: Query basic information about batman-adv - * device + * @BATADV_CMD_GET_MESH: Get attributes from softif/mesh + */ + BATADV_CMD_GET_MESH, + + /** + * @BATADV_CMD_GET_MESH_INFO: Alias for @BATADV_CMD_GET_MESH */ - BATADV_CMD_GET_MESH_INFO, + BATADV_CMD_GET_MESH_INFO = BATADV_CMD_GET_MESH, /** * @BATADV_CMD_TP_METER: Start a tp meter session @@ -393,9 +544,15 @@ enum batadv_nl_commands { BATADV_CMD_GET_ROUTING_ALGOS, /** - * @BATADV_CMD_GET_HARDIFS: Query list of hard interfaces + * @BATADV_CMD_GET_HARDIF: Get attributes from a hardif of the + * current softif */ - BATADV_CMD_GET_HARDIFS, + BATADV_CMD_GET_HARDIF, + + /** + * @BATADV_CMD_GET_HARDIFS: Alias for @BATADV_CMD_GET_HARDIF + */ + BATADV_CMD_GET_HARDIFS = BATADV_CMD_GET_HARDIF, /** * @BATADV_CMD_GET_TRANSTABLE_LOCAL: Query list of local translations @@ -443,6 +600,29 @@ enum batadv_nl_commands { */ BATADV_CMD_GET_MCAST_FLAGS, + /** + * @BATADV_CMD_SET_MESH: Set attributes for softif/mesh + */ + BATADV_CMD_SET_MESH, + + /** + * @BATADV_CMD_SET_HARDIF: Set attributes for hardif of the + * current softif + */ + BATADV_CMD_SET_HARDIF, + + /** + * @BATADV_CMD_GET_VLAN: Get attributes from a VLAN of the + * current softif + */ + BATADV_CMD_GET_VLAN, + + /** + * @BATADV_CMD_SET_VLAN: Set attributes for VLAN of the + * current softif + */ + BATADV_CMD_SET_VLAN, + /* add new commands above here */ /**

1 0

[batctl] master: batctl: Fix kerneldoc of BATADV_ATTR_MULTICAST_FORCEFLOOD_ENABLED (c90d7c1)
by postmaster＠open-mesh.org 16 Feb '19

16 Feb '19

Repository : ssh://git@open-mesh.org/batctl On branch : master >--------------------------------------------------------------- commit c90d7c132f275b2988e609f1ae370c0eb94edbfe Author: Sven Eckelmann <sven(a)narfation.org> Date: Sat Feb 16 08:36:02 2019 +0100 batctl: Fix kerneldoc of BATADV_ATTR_MULTICAST_FORCEFLOOD_ENABLED The name and the description has to be separated by ":" to be accepted as valid kerneldoc. Signed-off-by: Sven Eckelmann <sven(a)narfation.org> >--------------------------------------------------------------- c90d7c132f275b2988e609f1ae370c0eb94edbfe batman_adv.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/batman_adv.h b/batman_adv.h index 9b12d2a..305bf31 100644 --- a/batman_adv.h +++ b/batman_adv.h @@ -456,7 +456,7 @@ enum batadv_nl_attrs { BATADV_ATTR_LOG_LEVEL, /** - * @BATADV_ATTR_MULTICAST_FORCEFLOOD_ENABLED whether multicast + * @BATADV_ATTR_MULTICAST_FORCEFLOOD_ENABLED: whether multicast * optimizations should be replaced by simple broadcast-like flooding * of multicast packets. If set to non-zero then all nodes in the mesh * are going to use classic flooding for any multicast packet with no

1 0

[batman-adv] maint's head updated: batman-adv: fix uninit-value in batadv_interface_tx() (35482922)
by postmaster＠open-mesh.org 14 Feb '19

14 Feb '19

Repository : ssh://git@open-mesh.org/batman-adv Branch 'maint' now includes: 35482922 batman-adv: fix uninit-value in batadv_interface_tx()

1 0

[batman-adv] master: Merge branch 'maint' (816f978a)
by postmaster＠open-mesh.org 14 Feb '19

14 Feb '19

Repository : ssh://git@open-mesh.org/batman-adv On branch : master >--------------------------------------------------------------- commit 816f978afb9e157e6d8b24dd809dd42c044eb4c6 Merge: 68e981a3 35482922 Author: Sven Eckelmann <sven(a)narfation.org> Date: Thu Feb 14 11:02:04 2019 +0100 Merge branch 'maint' >--------------------------------------------------------------- 816f978afb9e157e6d8b24dd809dd42c044eb4c6 net/batman-adv/soft-interface.c | 2 ++ 1 file changed, 2 insertions(+) diff --cc net/batman-adv/soft-interface.c index 5cb4a2f5,450213b7..2e367230 --- a/net/batman-adv/soft-interface.c +++ b/net/batman-adv/soft-interface.c @@@ -226,15 -225,14 +226,17 @@@ static netdev_tx_t batadv_interface_tx( skb_reset_mac_header(skb); ethhdr = eth_hdr(skb); - switch (ntohs(ethhdr->h_proto)) { + proto = ethhdr->h_proto; + + switch (ntohs(proto)) { case ETH_P_8021Q: + if (!pskb_may_pull(skb, sizeof(*vhdr))) + goto dropped; vhdr = vlan_eth_hdr(skb); + proto = vhdr->h_vlan_encapsulated_proto; /* drop batman-in-batman packets to prevent loops */ - if (vhdr->h_vlan_encapsulated_proto != htons(ETH_P_BATMAN)) { + if (proto != htons(ETH_P_BATMAN)) { network_offset += VLAN_HLEN; break; }

1 0

[batman-adv] master: batman-adv: Prepare framework for mesh genl config (bb86f1a0)
by postmaster＠open-mesh.org 14 Feb '19

14 Feb '19

Repository : ssh://git@open-mesh.org/batman-adv On branch : master >--------------------------------------------------------------- commit bb86f1a07f9a61aa35f8ecf61640952abc1ce969 Author: Sven Eckelmann <sven(a)narfation.org> Date: Sat Feb 9 14:40:52 2019 +0100 batman-adv: Prepare framework for mesh genl config The batman-adv configuration interface was implemented solely using sysfs. This approach was condemned by non-batadv developers as "huge mistake". Instead a netlink/genl based implementation was suggested. The main objects for this configuration is the mesh/soft-interface object. Its actual object in memory already contains most of the available configuration settings. The genl interface reflects this by allowing to get/set it using the mesh specific commands. The BATADV_CMD_GET_MESH_INFO (or short version BATADV_CMD_GET_MESH) is reused as get command because it already provides the content of other information from the mesh/soft-interface which are not yet configuration specific. The set command BATADV_CMD_SET_MESH will also notify interested userspace listeners of the "config" mcast group using the BATADV_CMD_SET_MESH command message type that settings might have been changed and what the current values are. Signed-off-by: Sven Eckelmann <sven(a)narfation.org> >--------------------------------------------------------------- bb86f1a07f9a61aa35f8ecf61640952abc1ce969 include/uapi/linux/batman_adv.h | 16 +++- net/batman-adv/netlink.c | 160 ++++++++++++++++++++++++---------------- 2 files changed, 111 insertions(+), 65 deletions(-) diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h index a28e76a7..b3394aac 100644 --- a/include/uapi/linux/batman_adv.h +++ b/include/uapi/linux/batman_adv.h @@ -27,6 +27,7 @@ #define BATADV_NL_NAME "batadv" +#define BATADV_NL_MCAST_GROUP_CONFIG "config" #define BATADV_NL_MCAST_GROUP_TPMETER "tpmeter" /** @@ -372,10 +373,14 @@ enum batadv_nl_commands { BATADV_CMD_UNSPEC, /** - * @BATADV_CMD_GET_MESH_INFO: Query basic information about batman-adv - * device + * @BATADV_CMD_GET_MESH: Get attributes from softif/mesh */ - BATADV_CMD_GET_MESH_INFO, + BATADV_CMD_GET_MESH, + + /** + * @BATADV_CMD_GET_MESH_INFO: Alias for @BATADV_CMD_GET_MESH + */ + BATADV_CMD_GET_MESH_INFO = BATADV_CMD_GET_MESH, /** * @BATADV_CMD_TP_METER: Start a tp meter session @@ -443,6 +448,11 @@ enum batadv_nl_commands { */ BATADV_CMD_GET_MCAST_FLAGS, + /** + * @BATADV_CMD_SET_MESH: Set attributes for softif/mesh + */ + BATADV_CMD_SET_MESH, + /* add new commands above here */ /** diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c index e56c40d1..179cc7cf 100644 --- a/net/batman-adv/netlink.c +++ b/net/batman-adv/netlink.c @@ -62,6 +62,7 @@ struct genl_family batadv_netlink_family; /* multicast groups */ enum batadv_netlink_multicast_groups { + BATADV_NL_MCGRP_CONFIG, BATADV_NL_MCGRP_TPMETER, }; @@ -78,6 +79,7 @@ enum batadv_genl_ops_flags { }; static const struct genl_multicast_group batadv_netlink_mcgrps[] = { + [BATADV_NL_MCGRP_CONFIG] = { .name = BATADV_NL_MCAST_GROUP_CONFIG }, [BATADV_NL_MCGRP_TPMETER] = { .name = BATADV_NL_MCAST_GROUP_TPMETER }, }; @@ -138,20 +140,29 @@ batadv_netlink_get_ifindex(const struct nlmsghdr *nlh, int attrtype) } /** - * batadv_netlink_mesh_info_put() - fill in generic information about mesh - * interface - * @msg: netlink message to be sent back - * @soft_iface: interface for which the data should be taken + * batadv_netlink_mesh_fill() - Fill message with mesh attributes + * @msg: Netlink message to dump into + * @bat_priv: the bat priv with all the soft interface information + * @cmd: type of message to generate + * @portid: Port making netlink request + * @seq: sequence number for message + * @flags: Additional flags for message * - * Return: 0 on success, < 0 on error + * Return: 0 on success or negative error number in case of failure */ -static int -batadv_netlink_mesh_info_put(struct sk_buff *msg, struct net_device *soft_iface) +static int batadv_netlink_mesh_fill(struct sk_buff *msg, + struct batadv_priv *bat_priv, + enum batadv_nl_commands cmd, + u32 portid, u32 seq, int flags) { - struct batadv_priv *bat_priv = netdev_priv(soft_iface); + struct net_device *soft_iface = bat_priv->soft_iface; struct batadv_hard_iface *primary_if = NULL; struct net_device *hard_iface; - int ret = -ENOBUFS; + void *hdr; + + hdr = genlmsg_put(msg, portid, seq, &batadv_netlink_family, flags, cmd); + if (!hdr) + return -ENOBUFS; if (nla_put_string(msg, BATADV_ATTR_VERSION, BATADV_SOURCE_VERSION) || nla_put_string(msg, BATADV_ATTR_ALGO_NAME, @@ -162,16 +173,16 @@ batadv_netlink_mesh_info_put(struct sk_buff *msg, struct net_device *soft_iface) soft_iface->dev_addr) || nla_put_u8(msg, BATADV_ATTR_TT_TTVN, (u8)atomic_read(&bat_priv->tt.vn))) - goto out; + goto nla_put_failure; #ifdef CONFIG_BATMAN_ADV_BLA if (nla_put_u16(msg, BATADV_ATTR_BLA_CRC, ntohs(bat_priv->bla.claim_dest.group))) - goto out; + goto nla_put_failure; #endif if (batadv_mcast_mesh_info_put(msg, bat_priv)) - goto out; + goto nla_put_failure; primary_if = batadv_primary_if_get_selected(bat_priv); if (primary_if && primary_if->if_status == BATADV_IF_ACTIVE) { @@ -183,77 +194,95 @@ batadv_netlink_mesh_info_put(struct sk_buff *msg, struct net_device *soft_iface) hard_iface->name) || nla_put(msg, BATADV_ATTR_HARD_ADDRESS, ETH_ALEN, hard_iface->dev_addr)) - goto out; + goto nla_put_failure; } - ret = 0; + if (primary_if) + batadv_hardif_put(primary_if); - out: + genlmsg_end(msg, hdr); + return 0; + +nla_put_failure: if (primary_if) batadv_hardif_put(primary_if); - return ret; + genlmsg_cancel(msg, hdr); + return -EMSGSIZE; } /** - * batadv_netlink_get_mesh_info() - handle incoming BATADV_CMD_GET_MESH_INFO - * netlink request - * @skb: received netlink message - * @info: receiver information + * batadv_netlink_notify_mesh() - send softif attributes to listener + * @bat_priv: the bat priv with all the soft interface information * * Return: 0 on success, < 0 on error */ -static int -batadv_netlink_get_mesh_info(struct sk_buff *skb, struct genl_info *info) +static int batadv_netlink_notify_mesh(struct batadv_priv *bat_priv) { - struct net *net = genl_info_net(info); - struct net_device *soft_iface; - struct sk_buff *msg = NULL; - void *msg_head; - int ifindex; + struct sk_buff *msg; int ret; - if (!info->attrs[BATADV_ATTR_MESH_IFINDEX]) - return -EINVAL; - - ifindex = nla_get_u32(info->attrs[BATADV_ATTR_MESH_IFINDEX]); - if (!ifindex) - return -EINVAL; + msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL); + if (!msg) + return -ENOMEM; - soft_iface = dev_get_by_index(net, ifindex); - if (!soft_iface || !batadv_softif_is_valid(soft_iface)) { - ret = -ENODEV; - goto out; + ret = batadv_netlink_mesh_fill(msg, bat_priv, BATADV_CMD_SET_MESH, + 0, 0, 0); + if (ret < 0) { + nlmsg_free(msg); + return ret; } - msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL); - if (!msg) { - ret = -ENOMEM; - goto out; - } + genlmsg_multicast_netns(&batadv_netlink_family, + dev_net(bat_priv->soft_iface), msg, 0, + BATADV_NL_MCGRP_CONFIG, GFP_KERNEL); - msg_head = genlmsg_put(msg, info->snd_portid, info->snd_seq, - &batadv_netlink_family, 0, - BATADV_CMD_GET_MESH_INFO); - if (!msg_head) { - ret = -ENOBUFS; - goto out; - } + return 0; +} - ret = batadv_netlink_mesh_info_put(msg, soft_iface); +/** + * batadv_netlink_get_mesh() - Get softif attributes + * @skb: Netlink message with request data + * @info: receiver information + * + * Return: 0 on success or negative error number in case of failure + */ +static int batadv_netlink_get_mesh(struct sk_buff *skb, struct genl_info *info) +{ + struct batadv_priv *bat_priv = info->user_ptr[0]; + struct sk_buff *msg; + int ret; - out: - if (soft_iface) - dev_put(soft_iface); + msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL); + if (!msg) + return -ENOMEM; - if (ret) { - if (msg) - nlmsg_free(msg); + ret = batadv_netlink_mesh_fill(msg, bat_priv, BATADV_CMD_GET_MESH, + info->snd_portid, info->snd_seq, 0); + if (ret < 0) { + nlmsg_free(msg); return ret; } - genlmsg_end(msg, msg_head); - return genlmsg_reply(msg, info); + ret = genlmsg_reply(msg, info); + + return ret; +} + +/** + * batadv_netlink_set_mesh() - Set softif attributes + * @skb: Netlink message with request data + * @info: receiver information + * + * Return: 0 on success or negative error number in case of failure + */ +static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info) +{ + struct batadv_priv *bat_priv = info->user_ptr[0]; + + batadv_netlink_notify_mesh(bat_priv); + + return 0; } /** @@ -600,10 +629,11 @@ static void batadv_post_doit(const struct genl_ops *ops, struct sk_buff *skb, static const struct genl_ops batadv_netlink_ops[] = { { - .cmd = BATADV_CMD_GET_MESH_INFO, - .flags = GENL_ADMIN_PERM, + .cmd = BATADV_CMD_GET_MESH, + /* can be retrieved by unprivileged users */ .policy = batadv_netlink_policy, - .doit = batadv_netlink_get_mesh_info, + .doit = batadv_netlink_get_mesh, + .internal_flags = BATADV_FLAG_NEED_MESH, }, { .cmd = BATADV_CMD_TP_METER, @@ -685,7 +715,13 @@ static const struct genl_ops batadv_netlink_ops[] = { .policy = batadv_netlink_policy, .dumpit = batadv_mcast_flags_dump, }, - + { + .cmd = BATADV_CMD_SET_MESH, + .flags = GENL_ADMIN_PERM, + .policy = batadv_netlink_policy, + .doit = batadv_netlink_set_mesh, + .internal_flags = BATADV_FLAG_NEED_MESH, + }, }; struct genl_family batadv_netlink_family __ro_after_init = {

1 0

[batman-adv] master: batman-adv: Add bridge_loop_avoidance mesh genl configuration (5a6a76c8)
by postmaster＠open-mesh.org 14 Feb '19

14 Feb '19

Repository : ssh://git@open-mesh.org/batman-adv On branch : master >--------------------------------------------------------------- commit 5a6a76c82172f53598d73b65154bbcef4fdd7a9c Author: Sven Eckelmann <sven(a)narfation.org> Date: Sat Feb 9 14:40:58 2019 +0100 batman-adv: Add bridge_loop_avoidance mesh genl configuration The mesh interface can try to detect loops in the same mesh caused by (indirectly) bridged mesh/soft-interfaces of different nodes. Some of the loops can also be resolved without breaking the mesh. The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED attribute. Setting the u8 to zero will disable this feature and setting it to something else is enabling this feature. Signed-off-by: Sven Eckelmann <sven(a)narfation.org> >--------------------------------------------------------------- 5a6a76c82172f53598d73b65154bbcef4fdd7a9c include/uapi/linux/batman_adv.h | 7 +++++++ net/batman-adv/netlink.c | 17 +++++++++++++++++ 2 files changed, 24 insertions(+) diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h index f74ff261..3cb35c66 100644 --- a/include/uapi/linux/batman_adv.h +++ b/include/uapi/linux/batman_adv.h @@ -381,6 +381,13 @@ enum batadv_nl_attrs { */ BATADV_ATTR_BONDING_ENABLED, + /** + * @BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED: whether the bridge loop + * avoidance feature is enabled. This feature detects and avoids loops + * between the mesh and devices bridged with the soft interface + */ + BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED, + /* add attributes above here, update the policy in netlink.c */ /** diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c index 310a2c33..40c940da 100644 --- a/net/batman-adv/netlink.c +++ b/net/batman-adv/netlink.c @@ -144,6 +144,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = { [BATADV_ATTR_ISOLATION_MARK] = { .type = NLA_U32 }, [BATADV_ATTR_ISOLATION_MASK] = { .type = NLA_U32 }, [BATADV_ATTR_BONDING_ENABLED] = { .type = NLA_U8 }, + [BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED] = { .type = NLA_U8 }, }; /** @@ -284,6 +285,12 @@ static int batadv_netlink_mesh_fill(struct sk_buff *msg, !!atomic_read(&bat_priv->bonding))) goto nla_put_failure; +#ifdef CONFIG_BATMAN_ADV_BLA + if (nla_put_u8(msg, BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED, + !!atomic_read(&bat_priv->bridge_loop_avoidance))) + goto nla_put_failure; +#endif /* CONFIG_BATMAN_ADV_BLA */ + if (primary_if) batadv_hardif_put(primary_if); @@ -398,6 +405,16 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info) atomic_set(&bat_priv->bonding, !!nla_get_u8(attr)); } +#ifdef CONFIG_BATMAN_ADV_BLA + if (info->attrs[BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED]) { + attr = info->attrs[BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED]; + + atomic_set(&bat_priv->bridge_loop_avoidance, + !!nla_get_u8(attr)); + batadv_bla_status_update(bat_priv->soft_iface); + } +#endif /* CONFIG_BATMAN_ADV_BLA */ + batadv_netlink_notify_mesh(bat_priv); return 0;

1 0

[batman-adv] master: batman-adv: Add distributed_arp_table mesh genl configuration (1df7cdcb)
by postmaster＠open-mesh.org 14 Feb '19

14 Feb '19

Repository : ssh://git@open-mesh.org/batman-adv On branch : master >--------------------------------------------------------------- commit 1df7cdcb28ca596b96d3afb0358e3d7d645b8b05 Author: Sven Eckelmann <sven(a)narfation.org> Date: Sat Feb 9 14:40:59 2019 +0100 batman-adv: Add distributed_arp_table mesh genl configuration The mesh interface can use a distributed hash table to answer ARP requests without flooding the request through the whole mesh. The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED attribute. Setting the u8 to zero will disable this feature and setting it to something else is enabling this feature. Signed-off-by: Sven Eckelmann <sven(a)narfation.org> >--------------------------------------------------------------- 1df7cdcb28ca596b96d3afb0358e3d7d645b8b05 include/uapi/linux/batman_adv.h | 8 ++++++++ net/batman-adv/netlink.c | 17 +++++++++++++++++ 2 files changed, 25 insertions(+) diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h index 3cb35c66..f303a149 100644 --- a/include/uapi/linux/batman_adv.h +++ b/include/uapi/linux/batman_adv.h @@ -388,6 +388,14 @@ enum batadv_nl_attrs { */ BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED, + /** + * @BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED: whether the distributed + * arp table feature is enabled. This feature uses a distributed hash + * table to answer ARP requests without flooding the request through + * the whole mesh. + */ + BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED, + /* add attributes above here, update the policy in netlink.c */ /** diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c index 40c940da..3028c2a5 100644 --- a/net/batman-adv/netlink.c +++ b/net/batman-adv/netlink.c @@ -145,6 +145,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = { [BATADV_ATTR_ISOLATION_MASK] = { .type = NLA_U32 }, [BATADV_ATTR_BONDING_ENABLED] = { .type = NLA_U8 }, [BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED] = { .type = NLA_U8 }, + [BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED] = { .type = NLA_U8 }, }; /** @@ -291,6 +292,12 @@ static int batadv_netlink_mesh_fill(struct sk_buff *msg, goto nla_put_failure; #endif /* CONFIG_BATMAN_ADV_BLA */ +#ifdef CONFIG_BATMAN_ADV_DAT + if (nla_put_u8(msg, BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED, + !!atomic_read(&bat_priv->distributed_arp_table))) + goto nla_put_failure; +#endif /* CONFIG_BATMAN_ADV_DAT */ + if (primary_if) batadv_hardif_put(primary_if); @@ -415,6 +422,16 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info) } #endif /* CONFIG_BATMAN_ADV_BLA */ +#ifdef CONFIG_BATMAN_ADV_DAT + if (info->attrs[BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED]) { + attr = info->attrs[BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED]; + + atomic_set(&bat_priv->distributed_arp_table, + !!nla_get_u8(attr)); + batadv_dat_status_update(bat_priv->soft_iface); + } +#endif /* CONFIG_BATMAN_ADV_DAT */ + batadv_netlink_notify_mesh(bat_priv); return 0;

1 0

[batman-adv] master: batman-adv: Add log_level mesh genl configuration (3ca595ce)
by postmaster＠open-mesh.org 14 Feb '19

14 Feb '19

Repository : ssh://git@open-mesh.org/batman-adv On branch : master >--------------------------------------------------------------- commit 3ca595ce6da2b713c1d81c84afa90ce5f9ff6ee3 Author: Sven Eckelmann <sven(a)narfation.org> Date: Sat Feb 9 14:41:03 2019 +0100 batman-adv: Add log_level mesh genl configuration In contrast to other modules, batman-adv allows to set the debug message verbosity per mesh/soft-interface and not per module (via modparam). The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the u32 (bitmask) BATADV_ATTR_LOG_LEVEL attribute. Signed-off-by: Sven Eckelmann <sven(a)narfation.org> >--------------------------------------------------------------- 3ca595ce6da2b713c1d81c84afa90ce5f9ff6ee3 include/uapi/linux/batman_adv.h | 6 ++++++ net/batman-adv/netlink.c | 17 +++++++++++++++++ 2 files changed, 23 insertions(+) diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h index b37cb923..6d36e4b4 100644 --- a/include/uapi/linux/batman_adv.h +++ b/include/uapi/linux/batman_adv.h @@ -449,6 +449,12 @@ enum batadv_nl_attrs { */ BATADV_ATTR_HOP_PENALTY, + /** + * @BATADV_ATTR_LOG_LEVEL: bitmask with to define which debug messages + * should be send to the debug log/trace ring buffer + */ + BATADV_ATTR_LOG_LEVEL, + /* add attributes above here, update the policy in netlink.c */ /** diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c index ce6e6f07..8c019d46 100644 --- a/net/batman-adv/netlink.c +++ b/net/batman-adv/netlink.c @@ -53,6 +53,7 @@ #include "gateway_client.h" #include "gateway_common.h" #include "hard-interface.h" +#include "log.h" #include "multicast.h" #include "originator.h" #include "soft-interface.h" @@ -153,6 +154,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = { [BATADV_ATTR_GW_MODE] = { .type = NLA_U8 }, [BATADV_ATTR_GW_SEL_CLASS] = { .type = NLA_U32 }, [BATADV_ATTR_HOP_PENALTY] = { .type = NLA_U8 }, + [BATADV_ATTR_LOG_LEVEL] = { .type = NLA_U32 }, }; /** @@ -335,6 +337,12 @@ static int batadv_netlink_mesh_fill(struct sk_buff *msg, atomic_read(&bat_priv->hop_penalty))) goto nla_put_failure; +#ifdef CONFIG_BATMAN_ADV_DEBUG + if (nla_put_u32(msg, BATADV_ATTR_LOG_LEVEL, + atomic_read(&bat_priv->log_level))) + goto nla_put_failure; +#endif /* CONFIG_BATMAN_ADV_DEBUG */ + if (primary_if) batadv_hardif_put(primary_if); @@ -547,6 +555,15 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info) atomic_set(&bat_priv->hop_penalty, nla_get_u8(attr)); } +#ifdef CONFIG_BATMAN_ADV_DEBUG + if (info->attrs[BATADV_ATTR_LOG_LEVEL]) { + attr = info->attrs[BATADV_ATTR_LOG_LEVEL]; + + atomic_set(&bat_priv->log_level, + nla_get_u32(attr) & BATADV_DBG_ALL); + } +#endif /* CONFIG_BATMAN_ADV_DEBUG */ + batadv_netlink_notify_mesh(bat_priv); return 0;

1 0

[batman-adv] master: batman-adv: Add elp_interval hardif genl configuration (914db964)
by postmaster＠open-mesh.org 14 Feb '19

14 Feb '19

Repository : ssh://git@open-mesh.org/batman-adv On branch : master >--------------------------------------------------------------- commit 914db9648ed532a76864a884b673c4ac9a2db871 Author: Sven Eckelmann <sven(a)narfation.org> Date: Sat Feb 9 14:41:07 2019 +0100 batman-adv: Add elp_interval hardif genl configuration The ELP packets are transmitted every elp_interval milliseconds on an slave/hard-interface. This value can be changed using the configuration interface. The BATADV_CMD_SET_HARDIF/BATADV_CMD_GET_HARDIF commands allow to set/get the configuration of this feature using the u32 BATADV_ATTR_ELP_INTERVAL attribute. Signed-off-by: Sven Eckelmann <sven(a)narfation.org> >--------------------------------------------------------------- 914db9648ed532a76864a884b673c4ac9a2db871 include/uapi/linux/batman_adv.h | 6 ++++++ net/batman-adv/netlink.c | 17 +++++++++++++++++ 2 files changed, 23 insertions(+) diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h index 6bedd488..f966e497 100644 --- a/include/uapi/linux/batman_adv.h +++ b/include/uapi/linux/batman_adv.h @@ -477,6 +477,12 @@ enum batadv_nl_attrs { */ BATADV_ATTR_ORIG_INTERVAL, + /** + * @BATADV_ATTR_ELP_INTERVAL: defines the interval in milliseconds in + * which batman emits probing packets for neighbor sensing (ELP). + */ + BATADV_ATTR_ELP_INTERVAL, + /* add attributes above here, update the policy in netlink.c */ /** diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c index e25c139b..09187e6e 100644 --- a/net/batman-adv/netlink.c +++ b/net/batman-adv/netlink.c @@ -159,6 +159,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = { [BATADV_ATTR_MULTICAST_FORCEFLOOD_ENABLED] = { .type = NLA_U8 }, [BATADV_ATTR_NETWORK_CODING_ENABLED] = { .type = NLA_U8 }, [BATADV_ATTR_ORIG_INTERVAL] = { .type = NLA_U32 }, + [BATADV_ATTR_ELP_INTERVAL] = { .type = NLA_U32 }, }; /** @@ -825,6 +826,12 @@ static int batadv_netlink_hardif_fill(struct sk_buff *msg, goto nla_put_failure; } +#ifdef CONFIG_BATMAN_ADV_BATMAN_V + if (nla_put_u32(msg, BATADV_ATTR_ELP_INTERVAL, + atomic_read(&hard_iface->bat_v.elp_interval))) + goto nla_put_failure; +#endif /* CONFIG_BATMAN_ADV_BATMAN_V */ + genlmsg_end(msg, hdr); return 0; @@ -910,6 +917,16 @@ static int batadv_netlink_set_hardif(struct sk_buff *skb, struct batadv_hard_iface *hard_iface = info->user_ptr[1]; struct batadv_priv *bat_priv = info->user_ptr[0]; +#ifdef CONFIG_BATMAN_ADV_BATMAN_V + struct nlattr *attr; + + if (info->attrs[BATADV_ATTR_ELP_INTERVAL]) { + attr = info->attrs[BATADV_ATTR_ELP_INTERVAL]; + + atomic_set(&hard_iface->bat_v.elp_interval, nla_get_u32(attr)); + } +#endif /* CONFIG_BATMAN_ADV_BATMAN_V */ + batadv_netlink_notify_hardif(bat_priv, hard_iface); return 0;

1 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

commits February 2019