Repository : ssh://git@open-mesh.org/alfred
On branches: ecsv/master,master
>---------------------------------------------------------------
commit 0b431dc1b43cf257c37841806ef8cfc02d073ee1
Author: Sven Eckelmann <sven(a)narfation.org>
Date: Sat Oct 21 11:45:46 2017 +0200
alfred: use inline kernel-doc for uapi constants
The enums of constants for netlink tends to become rather large over time.
Documenting them is easier when the kernel-doc is actually next to constant
and not in a different block above the enum.
Also inline kernel-doc allows multi-paragraph description. This could be
required to better document the netlink command types and the expected
return values.
Signed-off-by: Sven Eckelmann <sven(a)narfation.org>
Signed-off-by: Simon Wunderlich <sw(a)simonwunderlich.de>
>---------------------------------------------------------------
0b431dc1b43cf257c37841806ef8cfc02d073ee1
batman_adv.h | 369 ++++++++++++++++++++++++++++++++++++++++++++++-------------
1 file changed, 290 insertions(+), 79 deletions(-)
diff --git a/batman_adv.h b/batman_adv.h
index a83ddb7..efd641c 100644
--- a/batman_adv.h
+++ b/batman_adv.h
@@ -24,20 +24,6 @@
/**
* enum batadv_tt_client_flags - TT client specific flags
- * @BATADV_TT_CLIENT_DEL: the client has to be deleted from the table
- * @BATADV_TT_CLIENT_ROAM: the client roamed to/from another node and the new
- * update telling its new real location has not been received/sent yet
- * @BATADV_TT_CLIENT_WIFI: this client is connected through a wifi interface.
- * This information is used by the "AP Isolation" feature
- * @BATADV_TT_CLIENT_ISOLA: this client is considered "isolated". This
- * information is used by the Extended Isolation feature
- * @BATADV_TT_CLIENT_NOPURGE: this client should never be removed from the table
- * @BATADV_TT_CLIENT_NEW: this client has been added to the local table but has
- * not been announced yet
- * @BATADV_TT_CLIENT_PENDING: this client is marked for removal but it is kept
- * in the table for one more originator interval for consistency purposes
- * @BATADV_TT_CLIENT_TEMP: this global client has been detected to be part of
- * the network but no nnode has already announced it
*
* Bits from 0 to 7 are called _remote flags_ because they are sent on the wire.
* Bits from 8 to 15 are called _local flags_ because they are used for local
@@ -48,160 +34,385 @@
* in the TT CRC computation.
*/
enum batadv_tt_client_flags {
+ /**
+ * @BATADV_TT_CLIENT_DEL: the client has to be deleted from the table
+ */
BATADV_TT_CLIENT_DEL = (1 << 0),
+
+ /**
+ * @BATADV_TT_CLIENT_ROAM: the client roamed to/from another node and
+ * the new update telling its new real location has not been
+ * received/sent yet
+ */
BATADV_TT_CLIENT_ROAM = (1 << 1),
+
+ /**
+ * @BATADV_TT_CLIENT_WIFI: this client is connected through a wifi
+ * interface. This information is used by the "AP Isolation" feature
+ */
BATADV_TT_CLIENT_WIFI = (1 << 4),
+
+ /**
+ * @BATADV_TT_CLIENT_ISOLA: this client is considered "isolated". This
+ * information is used by the Extended Isolation feature
+ */
BATADV_TT_CLIENT_ISOLA = (1 << 5),
+
+ /**
+ * @BATADV_TT_CLIENT_NOPURGE: this client should never be removed from
+ * the table
+ */
BATADV_TT_CLIENT_NOPURGE = (1 << 8),
+
+ /**
+ * @BATADV_TT_CLIENT_NEW: this client has been added to the local table
+ * but has not been announced yet
+ */
BATADV_TT_CLIENT_NEW = (1 << 9),
+
+ /**
+ * @BATADV_TT_CLIENT_PENDING: this client is marked for removal but it
+ * is kept in the table for one more originator interval for consistency
+ * purposes
+ */
BATADV_TT_CLIENT_PENDING = (1 << 10),
+
+ /**
+ * @BATADV_TT_CLIENT_TEMP: this global client has been detected to be
+ * part of the network but no nnode has already announced it
+ */
BATADV_TT_CLIENT_TEMP = (1 << 11),
};
/**
* enum batadv_nl_attrs - batman-adv netlink attributes
- *
- * @BATADV_ATTR_UNSPEC: unspecified attribute to catch errors
- * @BATADV_ATTR_VERSION: batman-adv version string
- * @BATADV_ATTR_ALGO_NAME: name of routing algorithm
- * @BATADV_ATTR_MESH_IFINDEX: index of the batman-adv interface
- * @BATADV_ATTR_MESH_IFNAME: name of the batman-adv interface
- * @BATADV_ATTR_MESH_ADDRESS: mac address of the batman-adv interface
- * @BATADV_ATTR_HARD_IFINDEX: index of the non-batman-adv interface
- * @BATADV_ATTR_HARD_IFNAME: name of the non-batman-adv interface
- * @BATADV_ATTR_HARD_ADDRESS: mac address of the non-batman-adv interface
- * @BATADV_ATTR_ORIG_ADDRESS: originator mac address
- * @BATADV_ATTR_TPMETER_RESULT: result of run (see batadv_tp_meter_status)
- * @BATADV_ATTR_TPMETER_TEST_TIME: time (msec) the run took
- * @BATADV_ATTR_TPMETER_BYTES: amount of acked bytes during run
- * @BATADV_ATTR_TPMETER_COOKIE: session cookie to match tp_meter session
- * @BATADV_ATTR_PAD: attribute used for padding for 64-bit alignment
- * @BATADV_ATTR_ACTIVE: Flag indicating if the hard interface is active
- * @BATADV_ATTR_TT_ADDRESS: Client MAC address
- * @BATADV_ATTR_TT_TTVN: Translation table version
- * @BATADV_ATTR_TT_LAST_TTVN: Previous translation table version
- * @BATADV_ATTR_TT_CRC32: CRC32 over translation table
- * @BATADV_ATTR_TT_VID: VLAN ID
- * @BATADV_ATTR_TT_FLAGS: Translation table client flags
- * @BATADV_ATTR_FLAG_BEST: Flags indicating entry is the best
- * @BATADV_ATTR_LAST_SEEN_MSECS: Time in milliseconds since last seen
- * @BATADV_ATTR_NEIGH_ADDRESS: Neighbour MAC address
- * @BATADV_ATTR_TQ: TQ to neighbour
- * @BATADV_ATTR_THROUGHPUT: Estimated throughput to Neighbour
- * @BATADV_ATTR_BANDWIDTH_UP: Reported uplink bandwidth
- * @BATADV_ATTR_BANDWIDTH_DOWN: Reported downlink bandwidth
- * @BATADV_ATTR_ROUTER: Gateway router MAC address
- * @BATADV_ATTR_BLA_OWN: Flag indicating own originator
- * @BATADV_ATTR_BLA_ADDRESS: Bridge loop avoidance claim MAC address
- * @BATADV_ATTR_BLA_VID: BLA VLAN ID
- * @BATADV_ATTR_BLA_BACKBONE: BLA gateway originator MAC address
- * @BATADV_ATTR_BLA_CRC: BLA CRC
- * @__BATADV_ATTR_AFTER_LAST: internal use
- * @NUM_BATADV_ATTR: total number of batadv_nl_attrs available
- * @BATADV_ATTR_MAX: highest attribute number currently defined
*/
enum batadv_nl_attrs {
+ /**
+ * @BATADV_ATTR_UNSPEC: unspecified attribute to catch errors
+ */
BATADV_ATTR_UNSPEC,
+
+ /**
+ * @BATADV_ATTR_VERSION: batman-adv version string
+ */
BATADV_ATTR_VERSION,
+
+ /**
+ * @BATADV_ATTR_ALGO_NAME: name of routing algorithm
+ */
BATADV_ATTR_ALGO_NAME,
+
+ /**
+ * @BATADV_ATTR_MESH_IFINDEX: index of the batman-adv interface
+ */
BATADV_ATTR_MESH_IFINDEX,
+
+ /**
+ * @BATADV_ATTR_MESH_IFNAME: name of the batman-adv interface
+ */
BATADV_ATTR_MESH_IFNAME,
+
+ /**
+ * @BATADV_ATTR_MESH_ADDRESS: mac address of the batman-adv interface
+ */
BATADV_ATTR_MESH_ADDRESS,
+
+ /**
+ * @BATADV_ATTR_HARD_IFINDEX: index of the non-batman-adv interface
+ */
BATADV_ATTR_HARD_IFINDEX,
+
+ /**
+ * @BATADV_ATTR_HARD_IFNAME: name of the non-batman-adv interface
+ */
BATADV_ATTR_HARD_IFNAME,
+
+ /**
+ * @BATADV_ATTR_HARD_ADDRESS: mac address of the non-batman-adv
+ * interface
+ */
BATADV_ATTR_HARD_ADDRESS,
+
+ /**
+ * @BATADV_ATTR_ORIG_ADDRESS: originator mac address
+ */
BATADV_ATTR_ORIG_ADDRESS,
+
+ /**
+ * @BATADV_ATTR_TPMETER_RESULT: result of run (see
+ * batadv_tp_meter_status)
+ */
BATADV_ATTR_TPMETER_RESULT,
+
+ /**
+ * @BATADV_ATTR_TPMETER_TEST_TIME: time (msec) the run took
+ */
BATADV_ATTR_TPMETER_TEST_TIME,
+
+ /**
+ * @BATADV_ATTR_TPMETER_BYTES: amount of acked bytes during run
+ */
BATADV_ATTR_TPMETER_BYTES,
+
+ /**
+ * @BATADV_ATTR_TPMETER_COOKIE: session cookie to match tp_meter session
+ */
BATADV_ATTR_TPMETER_COOKIE,
+
+ /**
+ * @BATADV_ATTR_PAD: attribute used for padding for 64-bit alignment
+ */
BATADV_ATTR_PAD,
+
+ /**
+ * @BATADV_ATTR_ACTIVE: Flag indicating if the hard interface is active
+ */
BATADV_ATTR_ACTIVE,
+
+ /**
+ * @BATADV_ATTR_TT_ADDRESS: Client MAC address
+ */
BATADV_ATTR_TT_ADDRESS,
+
+ /**
+ * @BATADV_ATTR_TT_TTVN: Translation table version
+ */
BATADV_ATTR_TT_TTVN,
+
+ /**
+ * @BATADV_ATTR_TT_LAST_TTVN: Previous translation table version
+ */
BATADV_ATTR_TT_LAST_TTVN,
+
+ /**
+ * @BATADV_ATTR_TT_CRC32: CRC32 over translation table
+ */
BATADV_ATTR_TT_CRC32,
+
+ /**
+ * @BATADV_ATTR_TT_VID: VLAN ID
+ */
BATADV_ATTR_TT_VID,
+
+ /**
+ * @BATADV_ATTR_TT_FLAGS: Translation table client flags
+ */
BATADV_ATTR_TT_FLAGS,
+
+ /**
+ * @BATADV_ATTR_FLAG_BEST: Flags indicating entry is the best
+ */
BATADV_ATTR_FLAG_BEST,
+
+ /**
+ * @BATADV_ATTR_LAST_SEEN_MSECS: Time in milliseconds since last seen
+ */
BATADV_ATTR_LAST_SEEN_MSECS,
+
+ /**
+ * @BATADV_ATTR_NEIGH_ADDRESS: Neighbour MAC address
+ */
BATADV_ATTR_NEIGH_ADDRESS,
+
+ /**
+ * @BATADV_ATTR_TQ: TQ to neighbour
+ */
BATADV_ATTR_TQ,
+
+ /**
+ * @BATADV_ATTR_THROUGHPUT: Estimated throughput to Neighbour
+ */
BATADV_ATTR_THROUGHPUT,
+
+ /**
+ * @BATADV_ATTR_BANDWIDTH_UP: Reported uplink bandwidth
+ */
BATADV_ATTR_BANDWIDTH_UP,
+
+ /**
+ * @BATADV_ATTR_BANDWIDTH_DOWN: Reported downlink bandwidth
+ */
BATADV_ATTR_BANDWIDTH_DOWN,
+
+ /**
+ * @BATADV_ATTR_ROUTER: Gateway router MAC address
+ */
BATADV_ATTR_ROUTER,
+
+ /**
+ * @BATADV_ATTR_BLA_OWN: Flag indicating own originator
+ */
BATADV_ATTR_BLA_OWN,
+
+ /**
+ * @BATADV_ATTR_BLA_ADDRESS: Bridge loop avoidance claim MAC address
+ */
BATADV_ATTR_BLA_ADDRESS,
+
+ /**
+ * @BATADV_ATTR_BLA_VID: BLA VLAN ID
+ */
BATADV_ATTR_BLA_VID,
+
+ /**
+ * @BATADV_ATTR_BLA_BACKBONE: BLA gateway originator MAC address
+ */
BATADV_ATTR_BLA_BACKBONE,
+
+ /**
+ * @BATADV_ATTR_BLA_CRC: BLA CRC
+ */
BATADV_ATTR_BLA_CRC,
+
/* add attributes above here, update the policy in netlink.c */
+
+ /**
+ * @__BATADV_ATTR_AFTER_LAST: internal use
+ */
__BATADV_ATTR_AFTER_LAST,
+
+ /**
+ * @NUM_BATADV_ATTR: total number of batadv_nl_attrs available
+ */
NUM_BATADV_ATTR = __BATADV_ATTR_AFTER_LAST,
+
+ /**
+ * @BATADV_ATTR_MAX: highest attribute number currently defined
+ */
BATADV_ATTR_MAX = __BATADV_ATTR_AFTER_LAST - 1
};
/**
* enum batadv_nl_commands - supported batman-adv netlink commands
- *
- * @BATADV_CMD_UNSPEC: unspecified command to catch errors
- * @BATADV_CMD_GET_MESH_INFO: Query basic information about batman-adv device
- * @BATADV_CMD_TP_METER: Start a tp meter session
- * @BATADV_CMD_TP_METER_CANCEL: Cancel a tp meter session
- * @BATADV_CMD_GET_ROUTING_ALGOS: Query the list of routing algorithms.
- * @BATADV_CMD_GET_HARDIFS: Query list of hard interfaces
- * @BATADV_CMD_GET_TRANSTABLE_LOCAL: Query list of local translations
- * @BATADV_CMD_GET_TRANSTABLE_GLOBAL Query list of global translations
- * @BATADV_CMD_GET_ORIGINATORS: Query list of originators
- * @BATADV_CMD_GET_NEIGHBORS: Query list of neighbours
- * @BATADV_CMD_GET_GATEWAYS: Query list of gateways
- * @BATADV_CMD_GET_BLA_CLAIM: Query list of bridge loop avoidance claims
- * @BATADV_CMD_GET_BLA_BACKBONE: Query list of bridge loop avoidance backbones
- * @__BATADV_CMD_AFTER_LAST: internal use
- * @BATADV_CMD_MAX: highest used command number
*/
enum batadv_nl_commands {
+ /**
+ * @BATADV_CMD_UNSPEC: unspecified command to catch errors
+ */
BATADV_CMD_UNSPEC,
+
+ /**
+ * @BATADV_CMD_GET_MESH_INFO: Query basic information about batman-adv
+ * device
+ */
BATADV_CMD_GET_MESH_INFO,
+
+ /**
+ * @BATADV_CMD_TP_METER: Start a tp meter session
+ */
BATADV_CMD_TP_METER,
+
+ /**
+ * @BATADV_CMD_TP_METER_CANCEL: Cancel a tp meter session
+ */
BATADV_CMD_TP_METER_CANCEL,
+
+ /**
+ * @BATADV_CMD_GET_ROUTING_ALGOS: Query the list of routing algorithms.
+ */
BATADV_CMD_GET_ROUTING_ALGOS,
+
+ /**
+ * @BATADV_CMD_GET_HARDIFS: Query list of hard interfaces
+ */
BATADV_CMD_GET_HARDIFS,
+
+ /**
+ * @BATADV_CMD_GET_TRANSTABLE_LOCAL: Query list of local translations
+ */
BATADV_CMD_GET_TRANSTABLE_LOCAL,
+
+ /**
+ * @BATADV_CMD_GET_TRANSTABLE_GLOBAL: Query list of global translations
+ */
BATADV_CMD_GET_TRANSTABLE_GLOBAL,
+
+ /**
+ * @BATADV_CMD_GET_ORIGINATORS: Query list of originators
+ */
BATADV_CMD_GET_ORIGINATORS,
+
+ /**
+ * @BATADV_CMD_GET_NEIGHBORS: Query list of neighbours
+ */
BATADV_CMD_GET_NEIGHBORS,
+
+ /**
+ * @BATADV_CMD_GET_GATEWAYS: Query list of gateways
+ */
BATADV_CMD_GET_GATEWAYS,
+
+ /**
+ * @BATADV_CMD_GET_BLA_CLAIM: Query list of bridge loop avoidance claims
+ */
BATADV_CMD_GET_BLA_CLAIM,
+
+ /**
+ * @BATADV_CMD_GET_BLA_BACKBONE: Query list of bridge loop avoidance
+ * backbones
+ */
BATADV_CMD_GET_BLA_BACKBONE,
+
/* add new commands above here */
+
+ /**
+ * @__BATADV_CMD_AFTER_LAST: internal use
+ */
__BATADV_CMD_AFTER_LAST,
+
+ /**
+ * @BATADV_CMD_MAX: highest used command number
+ */
BATADV_CMD_MAX = __BATADV_CMD_AFTER_LAST - 1
};
/**
* enum batadv_tp_meter_reason - reason of a tp meter test run stop
- * @BATADV_TP_REASON_COMPLETE: sender finished tp run
- * @BATADV_TP_REASON_CANCEL: sender was stopped during run
- * @BATADV_TP_REASON_DST_UNREACHABLE: receiver could not be reached or didn't
- * answer
- * @BATADV_TP_REASON_RESEND_LIMIT: (unused) sender retry reached limit
- * @BATADV_TP_REASON_ALREADY_ONGOING: test to or from the same node already
- * ongoing
- * @BATADV_TP_REASON_MEMORY_ERROR: test was stopped due to low memory
- * @BATADV_TP_REASON_CANT_SEND: failed to send via outgoing interface
- * @BATADV_TP_REASON_TOO_MANY: too many ongoing sessions
*/
enum batadv_tp_meter_reason {
+ /**
+ * @BATADV_TP_REASON_COMPLETE: sender finished tp run
+ */
BATADV_TP_REASON_COMPLETE = 3,
+
+ /**
+ * @BATADV_TP_REASON_CANCEL: sender was stopped during run
+ */
BATADV_TP_REASON_CANCEL = 4,
+
/* error status >= 128 */
+
+ /**
+ * @BATADV_TP_REASON_DST_UNREACHABLE: receiver could not be reached or
+ * didn't answer
+ */
BATADV_TP_REASON_DST_UNREACHABLE = 128,
+
+ /**
+ * @BATADV_TP_REASON_RESEND_LIMIT: (unused) sender retry reached limit
+ */
BATADV_TP_REASON_RESEND_LIMIT = 129,
+
+ /**
+ * @BATADV_TP_REASON_ALREADY_ONGOING: test to or from the same node
+ * already ongoing
+ */
BATADV_TP_REASON_ALREADY_ONGOING = 130,
+
+ /**
+ * @BATADV_TP_REASON_MEMORY_ERROR: test was stopped due to low memory
+ */
BATADV_TP_REASON_MEMORY_ERROR = 131,
+
+ /**
+ * @BATADV_TP_REASON_CANT_SEND: failed to send via outgoing interface
+ */
BATADV_TP_REASON_CANT_SEND = 132,
+
+ /**
+ * @BATADV_TP_REASON_TOO_MANY: too many ongoing sessions
+ */
BATADV_TP_REASON_TOO_MANY = 133,
};