commits November 2009

commits@lists.open-mesh.org

1 participants
989 discussions

[git] batman-adv branch, linux, updated. 31791c214a69092cb9feb5a6198a695a21fa0b24
by postmaster＠open-mesh.net 09 Nov '09

09 Nov '09

The following commit has been merged in the linux branch: commit 74eee2e8d08048c847d1998c686e12a477ff939a Author: Bruce Allan <bruce.w.allan(a)intel.com> Date: Thu Oct 22 21:22:18 2009 -0700 e1000e: reset the PHY on 82577/82578 when going to Sx The PHY on 82577/82578 parts needs a soft reset when transitioning to Sx state in order for the PHY write which disables gigabit speed to take effect. Gigabit speed must be disabled in order for the PHY writes to registers on page 800 (the wakeup control registers) to work as expected otherwise the system might not wake via WoL. Signed-off-by: Bruce Allan <bruce.w.allan(a)intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher(a)intel.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index 99df2ab..aa0ab0e 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -2843,9 +2843,8 @@ void e1000e_disable_gig_wol_ich8lan(struct e1000_hw *hw) E1000_PHY_CTRL_GBE_DISABLE; ew32(PHY_CTRL, phy_ctrl); - /* Workaround SWFLAG unexpectedly set during S0->Sx */ if (hw->mac.type == e1000_pchlan) - udelay(500); + e1000_phy_hw_reset_ich8lan(hw); default: break; } -- batman-adv

1 0

[git] batman-adv branch, linux, updated. 31791c214a69092cb9feb5a6198a695a21fa0b24
by postmaster＠open-mesh.net 09 Nov '09

09 Nov '09

The following commit has been merged in the linux branch: commit 0dc6d9cbe7df4d2c3cdf17cd2f78733102b0fea6 Author: Dhananjay Phadke <dhananjay(a)netxen.com> Date: Wed Oct 21 19:39:03 2009 +0000 netxen: avoid undue board config check Old code assumed board config version in the flash to be 1. When this will get changed by tools, driver just refuses to attach. This is unnecessary since driver does not have to parse board config structure directly (maintained by firmware). Signed-off-by: Dhananjay Phadke <dhananjay(a)netxen.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c index 3231400..3185a98 100644 --- a/drivers/net/netxen/netxen_nic_hw.c +++ b/drivers/net/netxen/netxen_nic_hw.c @@ -1901,22 +1901,16 @@ netxen_setup_hwops(struct netxen_adapter *adapter) int netxen_nic_get_board_info(struct netxen_adapter *adapter) { - int offset, board_type, magic, header_version; + int offset, board_type, magic; struct pci_dev *pdev = adapter->pdev; offset = NX_FW_MAGIC_OFFSET; if (netxen_rom_fast_read(adapter, offset, &magic)) return -EIO; - offset = NX_HDR_VERSION_OFFSET; - if (netxen_rom_fast_read(adapter, offset, &header_version)) - return -EIO; - - if (magic != NETXEN_BDINFO_MAGIC || - header_version != NETXEN_BDINFO_VERSION) { - dev_err(&pdev->dev, - "invalid board config, magic=%08x, version=%08x\n", - magic, header_version); + if (magic != NETXEN_BDINFO_MAGIC) { + dev_err(&pdev->dev, "invalid board config, magic=%08x\n", + magic); return -EIO; } -- batman-adv

1 0

[git] batman-adv branch, linux, updated. 31791c214a69092cb9feb5a6198a695a21fa0b24
by postmaster＠open-mesh.net 09 Nov '09

09 Nov '09

The following commit has been merged in the linux branch: commit 8bee0a91dd2f472d51dc107288c988ae0a0f371a Author: Dhananjay Phadke <dhananjay(a)netxen.com> Date: Wed Oct 21 19:39:01 2009 +0000 netxen: fix i2c init Avoid resetting subsys ID in i2c block. Also remove duplicate check for address tranlsation error. Signed-off-by: Dhananjay Phadke <dhananjay(a)netxen.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> diff --git a/drivers/net/netxen/netxen_nic_hdr.h b/drivers/net/netxen/netxen_nic_hdr.h index 7a71774..1c46da6 100644 --- a/drivers/net/netxen/netxen_nic_hdr.h +++ b/drivers/net/netxen/netxen_nic_hdr.h @@ -419,6 +419,7 @@ enum { #define NETXEN_CRB_ROMUSB \ NETXEN_PCI_CRB_WINDOW(NETXEN_HW_PX_MAP_CRB_ROMUSB) #define NETXEN_CRB_I2Q NETXEN_PCI_CRB_WINDOW(NETXEN_HW_PX_MAP_CRB_I2Q) +#define NETXEN_CRB_I2C0 NETXEN_PCI_CRB_WINDOW(NETXEN_HW_PX_MAP_CRB_I2C0) #define NETXEN_CRB_SMB NETXEN_PCI_CRB_WINDOW(NETXEN_HW_PX_MAP_CRB_SMB) #define NETXEN_CRB_MAX NETXEN_PCI_CRB_WINDOW(64) diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c index 91c2bc6..e40b914 100644 --- a/drivers/net/netxen/netxen_nic_init.c +++ b/drivers/net/netxen/netxen_nic_init.c @@ -531,6 +531,8 @@ int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose) continue; if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) { + if (off == (NETXEN_CRB_I2C0 + 0x1c)) + continue; /* do not reset PCI */ if (off == (ROMUSB_GLB + 0xbc)) continue; @@ -553,12 +555,6 @@ int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose) continue; } - if (off == NETXEN_ADDR_ERROR) { - printk(KERN_ERR "%s: Err: Unknown addr: 0x%08x\n", - netxen_nic_driver_name, buf[i].addr); - continue; - } - init_delay = 1; /* After writing this register, HW needs time for CRB */ /* to quiet down (else crb_window returns 0xffffffff) */ -- batman-adv

1 0

[git] batman-adv branch, linux, updated. 31791c214a69092cb9feb5a6198a695a21fa0b24
by postmaster＠open-mesh.net 09 Nov '09

09 Nov '09

The following commit has been merged in the linux branch: commit ff8a306d63a01f15f166039de94c448c76140d1d Author: Amit Kumar Salecha <amit.salecha(a)qlogic.com> Date: Wed Oct 21 19:39:02 2009 +0000 netxen: fix tx timeout handling on firmware hang Clear NX_RESETING bit in netxen_tx_timeout_task() so that the firmware watchdog task can catch need_reset request from tx timeout. Signed-off-by: Amit Kumar Salecha <amit.salecha(a)qlogic.com> Signed-off-by: Dhananjay Phadke <dhananjay(a)netxen.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c index 7fc15e9..0b4a56a 100644 --- a/drivers/net/netxen/netxen_nic_main.c +++ b/drivers/net/netxen/netxen_nic_main.c @@ -1919,6 +1919,7 @@ static void netxen_tx_timeout_task(struct work_struct *work) request_reset: adapter->need_fw_reset = 1; + clear_bit(__NX_RESETTING, &adapter->state); } struct net_device_stats *netxen_nic_get_stats(struct net_device *netdev) -- batman-adv

1 0

[git] batman-adv branch, linux, updated. 31791c214a69092cb9feb5a6198a695a21fa0b24
by postmaster＠open-mesh.net 09 Nov '09

09 Nov '09

The following commit has been merged in the linux branch: commit 5b7815b5ca2c7b44ebaaa33c66a3068d6de27bce Author: Santosh Shilimkar <santosh.shilimkar(a)ti.com> Date: Thu Oct 22 14:48:14 2009 -0700 omap4: Allow omap_serial_early_init() for OMAP4430 board This patch enables omap_serial_early_init() function for OMAP4430 SDP. Without this the bootup would throw oops in omap_serial_init(). Note that the ifndef CONFIG_ARCH_OMAP4 is split into two sections to enable omap_serial_early_init(). This ifndef cannot be removed until omap4 clock framework is implemented. Signed-off-by: Santosh Shilimkar <santosh.shilimkar(a)ti.com> Reviewed-By: Tony Lindgren <tony(a)atomide.com> Reviewed-By: Kevin Hilman <khilman(a)deeprootsystems.com> Signed-off-by: Tony Lindgren <tony(a)atomide.com> diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index eb37c40..609a5a4 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -58,6 +58,8 @@ static void __init gic_init_irq(void) static void __init omap_4430sdp_init_irq(void) { + omap_board_config = sdp4430_config; + omap_board_config_size = ARRAY_SIZE(sdp4430_config); omap2_init_common_hw(NULL, NULL); #ifdef CONFIG_OMAP_32K_TIMER omap2_gp_clockevent_set_gptimer(1); @@ -70,8 +72,6 @@ static void __init omap_4430sdp_init_irq(void) static void __init omap_4430sdp_init(void) { platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices)); - omap_board_config = sdp4430_config; - omap_board_config_size = ARRAY_SIZE(sdp4430_config); omap_serial_init(); } diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index e3a3bad..56be87d 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -302,7 +302,9 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0, pwrdm_init(powerdomains_omap); clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps); omap2_clk_init(); +#endif omap_serial_early_init(); +#ifndef CONFIG_ARCH_OMAP4 omap_hwmod_late_init(); omap_pm_if_init(); omap2_sdrc_init(sdrc_cs0, sdrc_cs1); -- batman-adv

1 0

[git] batman-adv branch, linux, updated. 31791c214a69092cb9feb5a6198a695a21fa0b24
by postmaster＠open-mesh.net 09 Nov '09

09 Nov '09

The following commit has been merged in the linux branch: commit 54341c9b741dc5646842fe47eccfc3b506c6dafa Author: Santosh Shilimkar <santosh.shilimkar(a)ti.com> Date: Thu Oct 22 14:48:14 2009 -0700 omap4: Fix UART4 platform data on omap4 This patch removes the unnecessary UART4 platform which is under data is wrong because of this There is a separate platform structure for UART4 Signed-off-by: Santosh Shilimkar <santosh.shilimkar(a)ti.com> Reviewed-By: Kevin Hilman <khilman(a)deeprootsystems.com> Signed-off-by: Tony Lindgren <tony(a)atomide.com> diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index ae21868..54dfeb5 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -109,16 +109,6 @@ static struct plat_serial8250_port serial_platform_data2[] = { .regshift = 2, .uartclk = OMAP24XX_BASE_BAUD * 16, }, { -#ifdef CONFIG_ARCH_OMAP4 - .membase = OMAP2_IO_ADDRESS(OMAP_UART4_BASE), - .mapbase = OMAP_UART4_BASE, - .irq = 70, - .flags = UPF_BOOT_AUTOCONF, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = OMAP24XX_BASE_BAUD * 16, - }, { -#endif .flags = 0 } }; -- batman-adv

1 0

[git] batman-adv branch, linux, updated. 31791c214a69092cb9feb5a6198a695a21fa0b24
by postmaster＠open-mesh.net 09 Nov '09

09 Nov '09

The following commit has been merged in the linux branch: commit b427f92f8cfca2787c18a77bef15cc8b13341774 Author: Kevin Hilman <khilman(a)deeprootsystems.com> Date: Thu Oct 22 14:48:13 2009 -0700 omap3: PM: enable UART3 module wakeups UART3 is in the PER powerdomain. If PER goes idle/inactive independently of CORE, for UART3 to wakeup it must have its wakeup enable bits setup in PM_WKEN_PER. This patch enables these bits. The reason it works when PER and CORE work together is because when CORE goes inactive/retention, the IOPAD wakeups are enabled and trigger UART3 wakeup. Without this patch, when the UART inactivity timer fires for UART3, its clocks are disabled and it's unable to wakeup so will be unusable until PER is awoken by another source. Another way of testing is by keeping CORE on during suspend but allowing PER to hit retention # echo 3 > /debug/pm_debug/core_pwrdm/suspend then enter suspend # echo mem > /sys/power/state Without this patch, UART3 will be unable to wakeup the system. Signed-off-by: Kevin Hilman <khilman(a)deeprootsystems.com> Signed-off-by: Tony Lindgren <tony(a)atomide.com> diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 378c2f6..8946319 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -639,14 +639,15 @@ static void __init prcm_setup_regs(void) prm_write_mod_reg(OMAP3430_IO_EN | OMAP3430_WKUP_EN, OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET); - /* Enable GPIO wakeups in PER */ + /* Enable wakeups in PER */ prm_write_mod_reg(OMAP3430_EN_GPIO2 | OMAP3430_EN_GPIO3 | OMAP3430_EN_GPIO4 | OMAP3430_EN_GPIO5 | - OMAP3430_EN_GPIO6, OMAP3430_PER_MOD, PM_WKEN); + OMAP3430_EN_GPIO6 | OMAP3430_EN_UART3, + OMAP3430_PER_MOD, PM_WKEN); /* and allow them to wake up MPU */ prm_write_mod_reg(OMAP3430_GRPSEL_GPIO2 | OMAP3430_EN_GPIO3 | OMAP3430_GRPSEL_GPIO4 | OMAP3430_EN_GPIO5 | - OMAP3430_GRPSEL_GPIO6, + OMAP3430_GRPSEL_GPIO6 | OMAP3430_EN_UART3, OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL); /* Don't attach IVA interrupts */ -- batman-adv

1 0

[git] batman-adv branch, linux, updated. 31791c214a69092cb9feb5a6198a695a21fa0b24
by postmaster＠open-mesh.net 09 Nov '09

09 Nov '09

The following commit has been merged in the linux branch: commit 60dbd8c95fe21955391bbaf0b66ac443742a3dd4 Author: Tony Lindgren <tony(a)atomide.com> Date: Thu Oct 22 14:48:13 2009 -0700 omap2: Fix console serial port number for n8x0 With the recent changes omap serial ports match the physical numbering like they should. Fix the kernel CMDLINE accordingly so console works. Signed-off-by: Tony Lindgren <tony(a)atomide.com> diff --git a/arch/arm/configs/n8x0_defconfig b/arch/arm/configs/n8x0_defconfig index 8da75de..264f52b 100644 --- a/arch/arm/configs/n8x0_defconfig +++ b/arch/arm/configs/n8x0_defconfig @@ -304,7 +304,7 @@ CONFIG_ALIGNMENT_TRAP=y CONFIG_ZBOOT_ROM_TEXT=0x10C08000 CONFIG_ZBOOT_ROM_BSS=0x10200000 # CONFIG_ZBOOT_ROM is not set -CONFIG_CMDLINE="root=1f03 rootfstype=jffs2 console=ttyS0,115200n8" +CONFIG_CMDLINE="root=1f03 rootfstype=jffs2 console=ttyS2,115200n8" # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set -- batman-adv

1 0

[git] batman-adv branch, linux, updated. 31791c214a69092cb9feb5a6198a695a21fa0b24
by postmaster＠open-mesh.net 09 Nov '09

09 Nov '09

The following commit has been merged in the linux branch: commit 964fe080d94db82a3268443e9b9ece4c60246414 Merge: 4848490c50c5d46d4e9749fddc374c303823bcc4 ff07eb897a97640b7ac0262cd50311ad403038f8 Author: Linus Torvalds <torvalds(a)linux-foundation.org> Date: Fri Oct 23 07:35:16 2009 +0900 Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus * git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: move virtrng_remove to .devexit.text move virtballoon_remove to .devexit.text virtio_blk: Revert serial number support virtio: let header files include virtio_ids.h virtio_blk: revert QUEUE_FLAG_VIRT addition diff --combined drivers/net/virtio_net.c index 54bf091,50ac94c..3709d6a --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@@ -22,7 -22,6 +22,6 @@@ #include <linux/ethtool.h> #include <linux/module.h> #include <linux/virtio.h> - #include <linux/virtio_ids.h> #include <linux/virtio_net.h> #include <linux/scatterlist.h> #include <linux/if_vlan.h> @@@ -454,7 -453,7 +453,7 @@@ static unsigned int free_old_xmit_skbs( vi->dev->stats.tx_bytes += skb->len; vi->dev->stats.tx_packets++; tot_sgs += skb_vnet_hdr(skb)->num_sg; - kfree_skb(skb); + dev_kfree_skb_any(skb); } return tot_sgs; } -- batman-adv

1 0

[git] batman-adv branch, linux, updated. 31791c214a69092cb9feb5a6198a695a21fa0b24
by postmaster＠open-mesh.net 09 Nov '09

09 Nov '09

The following commit has been merged in the linux branch: commit 4848490c50c5d46d4e9749fddc374c303823bcc4 Merge: d995053d045d777e78ba7eba71a6a0733f3aa726 845de8afa66550331dca164ab77fa49de930b699 Author: Linus Torvalds <torvalds(a)linux-foundation.org> Date: Fri Oct 23 07:34:23 2009 +0900 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (21 commits) niu: VLAN_ETH_HLEN should be used to make sure that the whole MAC header was copied to the head buffer in the Vlan packets case KS8851: Fix ks8851_set_rx_mode() for IFF_MULTICAST KS8851: Fix MAC address write order KS8851: Add soft reset at probe time net: fix section mismatch in fec.c net: Fix struct inet_timewait_sock bitfield annotation tcp: Try to catch MSG_PEEK bug net: Fix IP_MULTICAST_IF bluetooth: static lock key fix bluetooth: scheduling while atomic bug fix tcp: fix TCP_DEFER_ACCEPT retrans calculation tcp: reduce SYN-ACK retrans for TCP_DEFER_ACCEPT tcp: accept socket after TCP_DEFER_ACCEPT period Revert "tcp: fix tcp_defer_accept to consider the timeout" AF_UNIX: Fix deadlock on connecting to shutdown socket ethoc: clear only pending irqs ethoc: inline regs access vmxnet3: use dev_dbg, fix build for CONFIG_BLOCK=n virtio_net: use dev_kfree_skb_any() in free_old_xmit_skbs() be2net: fix support for PCI hot plug ... diff --combined drivers/net/ethoc.c index 9c950bb,590473a..f7d9ac8 --- a/drivers/net/ethoc.c +++ b/drivers/net/ethoc.c @@@ -17,7 -17,6 +17,7 @@@ #include <linux/mii.h> #include <linux/phy.h> #include <linux/platform_device.h> +#include <linux/sched.h> #include <net/ethoc.h> static int buffer_size = 0x8000; /* 32 KBytes */ @@@ -223,24 -222,25 +223,25 @@@ struct ethoc_bd u32 addr; }; - static u32 ethoc_read(struct ethoc *dev, loff_t offset) + static inline u32 ethoc_read(struct ethoc *dev, loff_t offset) { return ioread32(dev->iobase + offset); } - static void ethoc_write(struct ethoc *dev, loff_t offset, u32 data) + static inline void ethoc_write(struct ethoc *dev, loff_t offset, u32 data) { iowrite32(data, dev->iobase + offset); } - static void ethoc_read_bd(struct ethoc *dev, int index, struct ethoc_bd *bd) + static inline void ethoc_read_bd(struct ethoc *dev, int index, + struct ethoc_bd *bd) { loff_t offset = ETHOC_BD_BASE + (index * sizeof(struct ethoc_bd)); bd->stat = ethoc_read(dev, offset + 0); bd->addr = ethoc_read(dev, offset + 4); } - static void ethoc_write_bd(struct ethoc *dev, int index, + static inline void ethoc_write_bd(struct ethoc *dev, int index, const struct ethoc_bd *bd) { loff_t offset = ETHOC_BD_BASE + (index * sizeof(struct ethoc_bd)); @@@ -248,33 -248,33 +249,33 @@@ ethoc_write(dev, offset + 4, bd->addr); } - static void ethoc_enable_irq(struct ethoc *dev, u32 mask) + static inline void ethoc_enable_irq(struct ethoc *dev, u32 mask) { u32 imask = ethoc_read(dev, INT_MASK); imask |= mask; ethoc_write(dev, INT_MASK, imask); } - static void ethoc_disable_irq(struct ethoc *dev, u32 mask) + static inline void ethoc_disable_irq(struct ethoc *dev, u32 mask) { u32 imask = ethoc_read(dev, INT_MASK); imask &= ~mask; ethoc_write(dev, INT_MASK, imask); } - static void ethoc_ack_irq(struct ethoc *dev, u32 mask) + static inline void ethoc_ack_irq(struct ethoc *dev, u32 mask) { ethoc_write(dev, INT_SOURCE, mask); } - static void ethoc_enable_rx_and_tx(struct ethoc *dev) + static inline void ethoc_enable_rx_and_tx(struct ethoc *dev) { u32 mode = ethoc_read(dev, MODER); mode |= MODER_RXEN | MODER_TXEN; ethoc_write(dev, MODER, mode); } - static void ethoc_disable_rx_and_tx(struct ethoc *dev) + static inline void ethoc_disable_rx_and_tx(struct ethoc *dev) { u32 mode = ethoc_read(dev, MODER); mode &= ~(MODER_RXEN | MODER_TXEN); @@@ -508,7 -508,7 +509,7 @@@ static irqreturn_t ethoc_interrupt(int return IRQ_NONE; } - ethoc_ack_irq(priv, INT_MASK_ALL); + ethoc_ack_irq(priv, pending); if (pending & INT_MASK_BUSY) { dev_err(&dev->dev, "packet dropped\n"); -- batman-adv

1 0

← Newer
1
...
43
44
45
46
47
48
49
...
99
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

commits November 2009