[B.A.T.M.A.N.] [Battlemesh] Diversity in BATMAN
andrew at lunn.ch
Fri Mar 9 17:21:37 CET 2012
On Fri, Mar 09, 2012 at 05:07:37PM +0100, Benjamin Henrion wrote:
> On Fri, Mar 9, 2012 at 4:43 PM, Andrew Lunn <andrew at lunn.ch> wrote:
> >> With such metric, you don't make any difference between a 56K
> >> telephone line and a 10Ge NIC.
> >> If you 10Ge has 5pc packet loss and your 56K line has 0pc, your TQ
> >> will be prefer the 56k link.
> > If my 10Ge has 5% packet loss, its broken. I don't want to use
> > it. Falling back to the 56K link is the right thing to do.
> > There is a general rule of thumb. The higher the bandwidth, the less
> > packet loss there is. This is because high bandwidth links are
> > generally not wireless and so don't suffer high packet loss.
> > As a side effect, BATMAN will tend to favor wired links over wireless
> > links, because wired links tend to be reliable, wireless links drop
> > packets.
> So compare a 1Mbits wireless link with a 54Mbits one.
The 54Mbps link probably has a very low packet error rate. Otherwise
it would not be running at 54 Mbps. The automatic rate selection
algorithm would take it down to a lower rate if it had high packet
On the other hand, any link running at 1Mbit probably has quite a high
packet error rate. It must be a bad link, otherwise it would not be
using the lowest possible coding rate.
So when comparing a 1Mbps and a 54Mbps link, probably the TQ for the
54Mbps link will be better than the 1Mbps link.
More information about the B.A.T.M.A.N