Repository : ssh://git@diktynna/doc

On branch : master

commit 4c59db4092266bebe89e51d0453737637249f6b3 Merge: 3845c7d ab0d7d5 Author: Sven Eckelmann sven@narfation.org Date: Sat Dec 12 10:00:48 2020 +0100

Merge branch 'backup-redmine/2020-12-12'

4c59db4092266bebe89e51d0453737637249f6b3 open-mesh/Kernel_hacking_Debian_image.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --cc open-mesh/Kernel_hacking_Debian_image.rst index 91624a9,0000000..7224cf1 mode 100644,000000..100644 --- a/open-mesh/Kernel_hacking_Debian_image.rst +++ b/open-mesh/Kernel_hacking_Debian_image.rst @@@ -1,441 -1,0 +1,441 @@@ +.. SPDX-License-Identifier: GPL-2.0 + +Kernel hacking Debian image +=========================== + +The :doc:`OpenWrt image <OpenWrt_in_QEMU>` is an easy way to start multiple +virtual instances. But these instances usually don���t provide the +required infrastructure to test kernel modules extensively. And it also +depends on special toolchains to prepare the used tools/modules which +should tested. + +It is often easier to use the same operating system in the virtual +environment and on the host. Only the kernel is modified here to provide +the necessary helpers for in-kernel development. + +An interested reader might even extend this further to only provide a +modified kernel and use the currently running rootfs also in the virtual +environment. Such an approach is used in `hostap���s test +vm https://w1.fi/cgit/hostap/tree/tests/hwsim/vm`__ but it is out of +scope for this document. + +Create an Image +--------------- + +The debian root filesystem is used here to a minimal system to boot and +run the test programs. It is a simple ext4 filesystem with only +userspace components from Debian. The configuration is changed to: + +* automatically mount the shared folder +* automatically set up a static IPv4 address and hostname on bootup +* start a test-init.sh script from the shared folder on bootup +* disable root password +* prefer batctl binary from shared folder���s batctl subdirectory instead + of virtual environment binary + +The installation is also cleaned up at the end to reduce the required +storage space + +.. code-block:: sh + + qemu-img create debian.img 8G + sudo mkfs.ext4 -O '^has_journal' -F debian.img + sudo mkdir debian + sudo mount -o loop debian.img debian + sudo debootstrap buster debian + sudo systemd-nspawn -D debian apt update + udo systemd-nspawn -D debian debian apt install --no-install-recommends build-essential vim openssh-server less \ + pkg-config libnl-3-dev libnl-genl-3-dev libcap-dev tcpdump rng-tools5 \ + trace-cmd flex bison libelf-dev libdw-dev binutils-dev libunwind-dev libssl-dev libslang2-dev liblzma-dev libperl-dev + + sudo mkdir debian/root/.ssh/ + ssh-add -L | sudo tee debian/root/.ssh/authorized_keys + + sudo mkdir debian/host + sudo sh -c 'cat > debian/etc/fstab << EOF - host /host 9p trans=virtio,version=9p2000.L 0 0 ++ host /host 9p trans=virtio,version=9p2000.L,posixacl,msize=524288 0 0 + EOF' + + sudo sh -c 'cat > debian/etc/rc.local << "EOF" + #!/bin/sh -e + + MAC_PART="$(ip link show enp0s1 | awk "/ether/ {print $2}"| sed -e "s/.*://" -e "s/[\n\ ].*//"|awk "{print ("0x"$1)*1 }")" + IP_PART="$(echo $MAC_PART|awk "{ print $1+50 }")" + NODE_NR="$(echo $MAC_PART|awk "{ printf("%02d", $1) }")" + ip addr add 192.168.251.${IP_PART}/24 dev enp0s1 + ip link set up dev enp0s1 + hostname "node"$NODE_NR + ip link set up dev lo + [ ! -x /host/test-init.sh ] || /host/test-init.sh + exit 0 + EOF' + sudo chmod a+x debian/etc/rc.local + + sudo sed -i 's/^root:[^:]*:/root::/' debian/etc/shadow + + ## optionally: allow ssh logins without passwords + # sudo sed -i 's/^#PermitRootLogin.*/PermitRootLogin yes/' debian/etc/ssh/sshd_config + # sudo sed -i 's/^#PermitEmptyPasswords.*/PermitEmptyPasswords yes/' debian/etc/ssh/sshd_config + # sudo sed -i 's/^UsePAM.*/UsePAM no/' debian/etc/ssh/sshd_config + + ## optionally: enable autologin for user root + #sudo mkdir debian/etc/systemd/system/serial-getty@hvc0.service.d/ + #sudo sh -c 'cat > debian/etc/systemd/system/serial-getty@hvc0.service.d/autologin.conf << EOF + #[Service] + #ExecStart= + #ExecStart=-/sbin/agetty --autologin root -s %I 115200,38400,9600 vt102 + #EOF' + + sudo sh -c 'echo '''PATH="/host/batctl/:$PATH"''' >> debian/etc/profile' + sudo rm debian/var/cache/apt/archives/*.deb + sudo rm debian/var/lib/apt/lists/* + sudo e4defrag -v debian/ + sudo umount debian + sudo fsck.ext4 -fD debian.img + sudo zerofree -v debian.img + sudo fallocate --dig-holes debian.img + + + ## optionally: convert image to qcow2 + #sudo qemu-img convert -c -f raw -O qcow2 debian.img debian.qcow2 + #sudo mv debian.qcow2 debian.img + +Kernel compile +-------------- + +Any recent kernel can be used for the setup. We will use linux-next here +to get the most recent development kernels. It is also assumed that the +sources are copied to the same directory as the debian.img and a x86_64 +image will be used. + +The kernel will be build to enhance the virtualization and debugging +experience. It is configured with: + +* basic kernel features +* support for necessary drivers +* kernel hacking helpers +* kernel address + undefined sanitizers +* support for hwsim + +.. code-block:: sh + + # make sure that libelf-dev is installed or module build will fail with something like "No rule to make target 'net/batman-adv/bat_algo.o'" + + git clone git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git + cd linux-next + + make allnoconfig + cat >> .config << EOF + + # small configuration + CONFIG_SMP=y + CONFIG_EMBEDDED=n + # CONFIG_EXPERT is not set + CONFIG_MODULES=y + CONFIG_MODULE_UNLOAD=y + CONFIG_MODVERSIONS=y + CONFIG_MODULE_SRCVERSION_ALL=y + CONFIG_64BIT=y + CONFIG_X86_VSYSCALL_EMULATION=n + CONFIG_IA32_EMULATION=n + CONFIG_VOP_BUS=y + CONFIG_VOP=y + CONFIG_HW_RANDOM_VIRTIO=y + CONFIG_NET_9P_VIRTIO=y + CONFIG_VIRTIO_MENU=y + CONFIG_SCSI_VIRTIO=y + CONFIG_VIRTIO_BALLOON=y + CONFIG_VIRTIO_BLK=y + CONFIG_VIRTIO_CONSOLE=y + CONFIG_VIRTIO_INPUT=y + CONFIG_VIRTIO_NET=y + CONFIG_VIRTIO_PCI=y + CONFIG_VIRTIO_PCI_LEGACY=y + CONFIG_VIRTIO_BALLOON=y + CONFIG_VIRTIO_BLK_SCSI=y + CONFIG_VIRTIO_INPUT=y + CONFIG_VIRTIO_MMIO=y + CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y + CONFIG_RPMSG_VIRTIO=y + CONFIG_VSOCKETS=y + CONFIG_VIRTIO_VSOCKETS=y + CONFIG_DRM=y + CONFIG_DRM_VIRTIO_GPU=y + CONFIG_CAIF=y + CONFIG_CAIF_VIRTIO=y + CONFIG_CRYPTO_DEV_VIRTIO=y + CONFIG_FUSE_FS=y + CONFIG_VIRTIO_FS=y + CONFIG_IOMMU_SUPPORT=y + CONFIG_VIRTIO_IOMMU=y + CONFIG_LIBNVDIMM=y + CONFIG_VIRTIO_PMEM=y + CONFIG_CRC16=y + CONFIG_LIBCRC32C=y + CONFIG_CRYPTO_SHA512=y + CONFIG_NET=y + CONFIG_INET=y + CONFIG_DEBUG_FS=y + CONFIG_IPV6=y + CONFIG_BRIDGE=y + CONFIG_VLAN_8021Q=y + CONFIG_WIRELESS=n + CONFIG_NET_9P=y + CONFIG_NETWORK_FILESYSTEMS=y + CONFIG_9P_FS=y + CONFIG_9P_FS_POSIX_ACL=y + CONFIG_9P_FS_SECURITY=y + CONFIG_BLOCK=y + CONFIG_BLK_DEV=y + CONFIG_EXT4_FS=y + CONFIG_EXT4_USE_FOR_EXT23=y + CONFIG_TTY=y + CONFIG_HW_RANDOM=y + CONFIG_VHOST_RING=y + CONFIG_GENERIC_ALLOCATOR=y + CONFIG_SCSI_LOWLEVEL=y + CONFIG_SCSI=y + CONFIG_NETDEVICES=y + CONFIG_NET_CORE=y + CONFIG_DEVTMPFS=y + CONFIG_HYPERVISOR_GUEST=y + CONFIG_PVH=y + CONFIG_PARAVIRT=y + CONFIG_PARAVIRT_TIME_ACCOUNTING=y + CONFIG_PARAVIRT_SPINLOCKS=y + CONFIG_KVM_GUEST=y + CONFIG_BINFMT_ELF=y + CONFIG_BINFMT_SCRIPT=y + CONFIG_BINFMT_MISC=y + CONFIG_PCI=y + CONFIG_SYSVIPC=y + CONFIG_POSIX_MQUEUE=y + CONFIG_CROSS_MEMORY_ATTACH=y + CONFIG_UNIX=y + CONFIG_TMPFS=y + CONFIG_CGROUPS=y + CONFIG_BLK_CGROUP=y + CONFIG_CGROUP_CPUACCT=y + CONFIG_CGROUP_DEVICE=y + CONFIG_CGROUP_FREEZER=y + CONFIG_CGROUP_HUGETLB=y + CONFIG_CGROUP_NET_CLASSID=y + CONFIG_CGROUP_NET_PRIO=y + CONFIG_CGROUP_PERF=y + CONFIG_CGROUP_SCHED=y + CONFIG_DEVPTS_MULTIPLE_INSTANCES=y + CONFIG_INOTIFY_USER=y + CONFIG_FHANDLE=y + CONFIG_CFG80211=y + CONFIG_DUMMY=y + CONFIG_PACKET=y + CONFIG_VETH=y + CONFIG_IP_MULTICAST=y + CONFIG_NET_IPGRE_DEMUX=y + CONFIG_NET_IP_TUNNEL=y + CONFIG_NET_IPGRE=y + CONFIG_NET_IPGRE_BROADCAST=y + # CONFIG_LEGACY_PTYS is not set + CONFIG_NO_HZ_IDLE=y + CONFIG_CPU_IDLE_GOV_HALTPOLL=y + CONFIG_PVPANIC=y + + # makes boot a lot slower but required for shutdown + CONFIG_ACPI=y + + + #debug stuff + CONFIG_CC_STACKPROTECTOR_STRONG=y + CONFIG_LOCKUP_DETECTOR=y + CONFIG_DETECT_HUNG_TASK=y + CONFIG_SCHED_STACK_END_CHECK=y + CONFIG_DEBUG_RT_MUTEXES=y + CONFIG_DEBUG_SPINLOCK=y + CONFIG_DEBUG_MUTEXES=y + CONFIG_PROVE_LOCKING=y + CONFIG_LOCK_STAT=y + CONFIG_DEBUG_LOCKDEP=y + CONFIG_DEBUG_ATOMIC_SLEEP=y + CONFIG_DEBUG_LIST=y + CONFIG_DEBUG_PI_LIST=y + CONFIG_DEBUG_SG=y + CONFIG_DEBUG_NOTIFIERS=y + CONFIG_PROVE_RCU_REPEATEDLY=y + CONFIG_SPARSE_RCU_POINTER=y + CONFIG_DEBUG_STRICT_USER_COPY_CHECKS=y + CONFIG_X86_VERBOSE_BOOTUP=y + CONFIG_DEBUG_RODATA=y + CONFIG_DEBUG_RODATA_TEST=n + CONFIG_DEBUG_SET_MODULE_RONX=y + CONFIG_PAGE_EXTENSION=y + CONFIG_DEBUG_PAGEALLOC=y + CONFIG_DEBUG_OBJECTS=y + CONFIG_DEBUG_OBJECTS_FREE=y + CONFIG_DEBUG_OBJECTS_TIMERS=y + CONFIG_DEBUG_OBJECTS_WORK=y + CONFIG_DEBUG_OBJECTS_RCU_HEAD=y + CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y + CONFIG_DEBUG_KMEMLEAK=y + CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE=8000 + CONFIG_DEBUG_STACK_USAGE=y + CONFIG_DEBUG_STACKOVERFLOW=y + CONFIG_DEBUG_INFO=y + CONFIG_DEBUG_INFO_DWARF4=y + CONFIG_GDB_SCRIPTS=y + CONFIG_READABLE_ASM=y + CONFIG_STACK_VALIDATION=y + CONFIG_WQ_WATCHDOG=y + CONFIG_DEBUG_KOBJECT_RELEASE=y + CONFIG_DEBUG_WQ_FORCE_RR_CPU=y + CONFIG_OPTIMIZE_INLINING=y + CONFIG_ENABLE_MUST_CHECK=y + CONFIG_ENABLE_WARN_DEPRECATED=y + CONFIG_DEBUG_SECTION_MISMATCH=y + CONFIG_UNWINDER_ORC=y + CONFIG_FTRACE=y + CONFIG_FUNCTION_TRACER=y + CONFIG_FUNCTION_GRAPH_TRACER=y + CONFIG_FTRACE_SYSCALLS=y + CONFIG_TRACER_SNAPSHOT=y + CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP=y + CONFIG_STACK_TRACER=y + CONFIG_UPROBE_EVENTS=y + CONFIG_DYNAMIC_FTRACE=y + CONFIG_FUNCTION_PROFILER=y + CONFIG_HIST_TRIGGERS=y + CONFIG_SYMBOLIC_ERRNAME=y + CONFIG_DYNAMIC_DEBUG=y + CONFIG_PRINTK_TIME=y + CONFIG_PRINTK_CALLER=y + CONFIG_DEBUG_MISC=y + CONFIG_PROVE_RCU_LIST=y + CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_32B=y + + # for GCC 5+ + CONFIG_KASAN=y + CONFIG_KASAN_INLINE=y + CONFIG_UBSAN_SANITIZE_ALL=y + CONFIG_UBSAN=y + CONFIG_UBSAN_NULL=y + EOF + make olddefconfig + + cat >> .config << EOF + # allow to use unsigned regdb with hwsim + CONFIG_EXPERT=y + CONFIG_CFG80211_CERTIFICATION_ONUS=y + # CONFIG_CFG80211_REQUIRE_SIGNED_REGDB is not set + EOF + make olddefconfig + + make all -j$(nproc || echo 1) + +Build the BIOS +-------------- + +The (sea)bios used by qemu is nice to boot all kind of legacy images but +reduces the performance for booting a paravirtualized Linux system. +Something like qboot works better for this purpose: + +.. code-block:: sh + + git clone https://github.com/bonzini/qboot.git + cd qboot + meson build && ninja -C build + cd .. + +.. _open-mesh-kernel-hacking-debian-image-building-the-batman-adv-module: + +Building the batman-adv module +------------------------------ + +The kernel module can be build outside the virtual environment and +shared over the 9p mount. The path to the kernel sources have to be +provided to the make process + +.. code-block:: sh + + make KERNELPATH="$(pwd)/../linux-next" + +The kernel module can also be compiled in a way which creates better +stack traces and increases the usability with (k)gdb: + +.. code-block:: sh + + make EXTRA_CFLAGS="-fno-inline -Og -fno-optimize-sibling-calls" KERNELPATH="$(pwd)/../linux-next" V=1 + +Start of the environment +------------------------ + +virtual network initialization +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The +:ref:`virtual-network.sh from the OpenWrt environment <open-mesh-openwrt-in-qemu-virtual-network-initialization>` +can be reused again. + +VM instances bringup +~~~~~~~~~~~~~~~~~~~~ + +The +:ref:`run.sh from the OpenWrt environment <open-mesh-openwrt-in-qemu-vm-instances-bringup>` +can mostly be reused. There are only minimal +adjustments required. + +The BASE_IMG is of course no longer the same because a new image +���debian.img��� was created for our new environment. The image also doesn���t +contain a bootloader or kernel anymore. The kernel must now be supplied +manually to qemu. + +.. code-block:: sh + + BASE_IMG=debian.img + BOOTARGS+=("-bios" "qboot/build/bios.bin") + BOOTARGS+=("-kernel" "linux-next/arch/x86/boot/bzImage") + BOOTARGS+=("-append" "root=/dev/vda rw console=hvc0 nokaslr tsc=reliable no_timer_check noreplace-smp rootfstype=ext4 rcupdate.rcu_expedited=1 reboot=t pci=lastbus=0 i8042.direct=1 i8042.dumbkbd=1 i8042.nopnp=1 i8042.noaux=1") + BOOTARGS+=("-device" "virtconsole,chardev=charconsole0,id=console0") + +It is also recommended to use linux-next/vmlinux instead of bzImage with +qemu 4.0.0 (or later) + +Automatic test initialization +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The +:ref:`test-init.sh from the OpenWrt environment <open-mesh-openwrt-in-qemu-automatic-test-initialization>` +is always test specific. But its main +functionality is still the same as before. A simple example would be: + +.. code-block:: sh + + cat > test-init.sh << "EOF" + #! /bin/sh + + set -e + + ## get internet access + dhclient enp0s2 + + ## Simple batman-adv setup + + # ip link add dummy0 type dummy + ip link set up dummy0 + + rmmod batman-adv || true + insmod /host/batman-adv/net/batman-adv/batman-adv.ko + /host/batctl/batctl routing_algo BATMAN_IV + /host/batctl/batctl if add dummy0 + /host/batctl/batctl it 5000 + /host/batctl/batctl if add enp0s1 + ip link set up dev enp0s1 + ip link set up dev bat0 + EOF + + chmod +x test-init.sh + +Start +----- + +The startup method +:ref:`from the OpenWrt environment <open-mesh-openwrt-in-qemu-start>` +should be used here.