From: Linus Lüssing linus.luessing@web.de
This patch adds the multicast debug level to check for own multicast flag changes for instance.
Signed-off-by: Linus Lüssing linus.luessing@web.de ---
Changes in v4: * rebase to current master (no conflicts)
Changes in v3: * none
Changes in v2: * added a sentence about 'mcast' log level to manpage
README | 1 + man/batctl.8 | 6 +++--- sys.c | 5 +++++ 3 files changed, 9 insertions(+), 3 deletions(-)
diff --git a/README b/README index f87c551..b5de8a6 100644 --- a/README +++ b/README @@ -390,6 +390,7 @@ $ batctl loglevel [ ] messages related to bridge loop avoidance (bla) [ ] messages related to arp snooping and distributed arp table (dat) [ ] messages related to network coding (nc) +[ ] messages related to multicast (mcast)
batctl nc_nodes =============== diff --git a/man/batctl.8 b/man/batctl.8 index e804a08..f8955d0 100644 --- a/man/batctl.8 +++ b/man/batctl.8 @@ -98,9 +98,9 @@ level. Level 'none' disables all verbose logging. Level 'batman' enables message Level 'routes' enables messages related to routes being added / changed / deleted. Level 'tt' enables messages related to translation table operations. Level 'bla' enables messages related to the bridge loop avoidance. Level 'dat' enables messages related to ARP snooping and the Distributed Arp Table. Level 'nc' enables messages related to network coding. -Level 'all' enables all messages. The messages are sent to the batman-adv debug log. Use \fBbatctl log\fP to retrieve it. -Make sure to have debugging output enabled when compiling the module otherwise the output as well as the loglevel options -won't be available. +Level 'mcast' enables messages related to multicast optimizations. Level 'all' enables all messages. The messages +are sent to the batman-adv debug log. Use \fBbatctl log\fP to retrieve it. Make sure to have debugging output enabled +when compiling the module otherwise the output as well as the loglevel options won't be available. .br .IP "\fBlog\fP|\fBl\fP [\fB-n\fP]\fP" batctl will read the batman-adv debug log which has to be compiled into the kernel module. If "-n" is given batctl will not diff --git a/sys.c b/sys.c index afa8533..ca837f6 100644 --- a/sys.c +++ b/sys.c @@ -277,6 +277,7 @@ static void log_level_usage(void) fprintf(stderr, " \t bla Messages related to bridge loop avoidance\n"); fprintf(stderr, " \t dat Messages related to arp snooping and distributed arp table\n"); fprintf(stderr, " \t nc Messages related to network coding\n"); + fprintf(stderr, " \t mcast Messages related to multicast\n"); }
int handle_loglevel(char *mesh_iface, int argc, char **argv) @@ -321,6 +322,8 @@ int handle_loglevel(char *mesh_iface, int argc, char **argv) log_level |= BIT(4); else if (strcmp(argv[i], "nc") == 0) log_level |= BIT(5); + else if (strcmp(argv[i], "mcast") == 0) + log_level |= BIT(6); else { log_level_usage(); goto out; @@ -354,6 +357,8 @@ int handle_loglevel(char *mesh_iface, int argc, char **argv) "messages related to arp snooping and distributed arp table", "dat"); printf("[%c] %s (%s)\n", (log_level & BIT(5)) ? 'x' : ' ', "messages related to network coding", "nc"); + printf("[%c] %s (%s)\n", (log_level & BIT(6)) ? 'x' : ' ', + "messages related to multicast", "mcast");
out: free(path_buff);
From: Linus Lüssing linus.luessing@web.de
This patch adds an option to retrieve the per originator multicast flags table.
Signed-off-by: Linus Lüssing linus.luessing@web.de ---
Changes in v4: * rebase to current master (no conflicts)
Changes in v3: * updated mcast_flags example in README file
Changes in v2: * header_lines for 'mcast_flags' increased from 2 to 6 * Example updated to more verbose, 6 lines debugfs header output * (kept order for the noted manpage section as it wasn't alphabetically orderd in the first place - instead keeping the previous "logical" order - 'mcast' after 'nc')
README | 34 ++++++++++++++++++++++++++++++++++ debug.c | 6 ++++++ debug.h | 1 + functions.c | 1 + man/batctl.8 | 3 +++ 5 files changed, 45 insertions(+)
diff --git a/README b/README index b5de8a6..f92bc26 100644 --- a/README +++ b/README @@ -426,6 +426,40 @@ display or modify the multicast mode setting
Usage: batctl multicast_mode|mm [0|1]
+batctl mcast_flags +================= + +display the local D.A.T. cache + +Usage batctl mcast_flags|mf + +Example: + +Multicast flags (own flags: [U46]) +* Bridged [U] U +* No IGMP/MLD Querier [4/6]: ./. +* Shadowing IGMP/MLD Querier [4/6]: 4/6 +------------------------------------------- + Originator Flags +02:04:64:a4:39:c1 [U..] +02:04:64:a4:39:c2 [U..] +02:04:64:a4:39:c3 [...] + +where: +- Originator: the MAC address of the originating (primary interface) + batman-adv node +- Flags: multicast flags of the according node +- U: wants all unsnoopable multicast traffic, meaning other nodes need to always + forward any multicast traffic destined to ff02::1 or 224.0.0.0/24 to it +- 4: wants all IPv4 multicast traffic, meaning other nodes need to always + forward any IPv4 multicast traffic to it +- 6: wants all IPv6 multicast traffic, meaning other nodes need to always + forward any IPv6 multicast traffic to it + +If a node does not have multicast optimizations available (e.g. old batman-adv +version or optimizations not compiled in), therefore not announcing any +multicast tvlv/flags, a '-' will be displayed instead of '[...]'. + batctl aggregation ==================
diff --git a/debug.c b/debug.c index 3db3ed9..5b280cb 100644 --- a/debug.c +++ b/debug.c @@ -84,6 +84,12 @@ const struct debug_table_data batctl_debug_tables[BATCTL_TABLE_NUM] = { .debugfs_name = "nc_nodes", .header_lines = 0, }, + { + .opt_long = "mcast_flags", + .opt_short = "mf", + .debugfs_name = "mcast_flags", + .header_lines = 6, + }, };
static void debug_table_usage(int debug_table) diff --git a/debug.h b/debug.h index df65f50..46e8c3c 100644 --- a/debug.h +++ b/debug.h @@ -40,6 +40,7 @@ enum batctl_debug_tables { BATCTL_TABLE_BLA_BACKBONES, BATCTL_TABLE_DAT, BATCTL_TABLE_NETWORK_CODING_NODES, + BATCTL_TABLE_MCAST_FLAGS, BATCTL_TABLE_NUM, };
diff --git a/functions.c b/functions.c index be8f8b0..97a6dbd 100644 --- a/functions.c +++ b/functions.c @@ -68,6 +68,7 @@ const char *fs_compile_out_param[] = { batctl_debug_tables[BATCTL_TABLE_BLA_BACKBONES].debugfs_name, batctl_debug_tables[BATCTL_TABLE_DAT].debugfs_name, batctl_debug_tables[BATCTL_TABLE_NETWORK_CODING_NODES].debugfs_name, + batctl_debug_tables[BATCTL_TABLE_MCAST_FLAGS].debugfs_name, NULL, };
diff --git a/man/batctl.8 b/man/batctl.8 index f8955d0..05f68d3 100644 --- a/man/batctl.8 +++ b/man/batctl.8 @@ -236,6 +236,9 @@ List of debug tables: .RS 10 - nc_nodes|nn (compile time option) .RE +.RS 10 +- mcast_flags|mf (compile time option) +.RE .RE .br .IP "\fBtranslate\fP|\fBt\fP \fBMAC_address\fP|\fBbat-host_name\fP|\fBhost_name\fP|\fBIP_address\fP"
diff --git a/README b/README index b5de8a6..f92bc26 100644 --- a/README +++ b/README @@ -426,6 +426,40 @@ display or modify the multicast mode setting
Usage: batctl multicast_mode|mm [0|1]
+batctl mcast_flags +=================
+display the local D.A.T. cache
DAT? This seems wrong.
The rest looks good on first glance. :)
Thanks, Simon
On Friday, May 13, 2016 17:30:15 Linus Lüssing wrote:
From: Linus Lüssing linus.luessing@web.de
This patch adds the multicast debug level to check for own multicast flag changes for instance.
Signed-off-by: Linus Lüssing linus.luessing@web.de
Changes in v4:
- rebase to current master (no conflicts)
Changes in v3:
- none
Changes in v2:
- added a sentence about 'mcast' log level to manpage
README | 1 + man/batctl.8 | 6 +++--- sys.c | 5 +++++ 3 files changed, 9 insertions(+), 3 deletions(-)
Applied in revision 55042b3.
Thanks, Marek
b.a.t.m.a.n@lists.open-mesh.org
-
Linus Lüssing -
Marek Lindner -
Simon Wunderlich