root@31c136:~# dmesg 
[    0.000000] Linux version 3.10.15 (ilario@ilario-fisso) (gcc version 4.6.4 (OpenWrt/Linaro GCC 4.6-2013.05 r38505) ) #1 Sun Mar 30 12:34:05 CEST 2014
[    0.000000] MyLoader: sysp=d7bf7fa7, boardp=5fe05eaf, parts=57ed58e6
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 00019374 (MIPS 24Kc)
[    0.000000] SoC: Atheros AR7241 rev 1
[    0.000000] Clocks: CPU:390.000MHz, DDR:390.000MHz, AHB:195.000MHz, Ref:5.000MHz
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 02000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x01ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x01ffffff]
[    0.000000] On node 0 totalpages: 8192
[    0.000000] free_area_init_node: node 0, pgdat 8030aa90, node_mem_map 81000000
[    0.000000]   Normal zone: 64 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 8192 pages, LIFO batch:0
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
[    0.000000] Kernel command line:  board=UBNT-BM console=ttyS0,115200 mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7552k(firmware),256k(cfg)ro,64k(EEPROM)ro rootfstype=squashfs,jffs2 noinitrd
[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 28784k/32768k available (2223k kernel code, 3984k reserved, 594k data, 252k init, 0k highmem)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:51
[    0.060000] Calibrating delay loop... 259.27 BogoMIPS (lpj=1296384)
[    0.070000] pid_max: default: 32768 minimum: 301
[    0.070000] Mount-cache hash table entries: 512
[    0.080000] NET: Registered protocol family 16
[    0.090000] MIPS: machine is Ubiquiti Bullet M
[    0.090000] registering PCI controller with io_map_base unset
[    0.300000] bio: create slab <bio-0> at 0
[    0.310000] PCI host bridge to bus 0000:00
[    0.310000] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
[    0.320000] pci_bus 0000:00: root bus resource [io  0x0000]
[    0.320000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.330000] pci 0000:00:00.0: [168c:002a] type 00 class 0x028000
[    0.330000] pci 0000:00:00.0: fixup device configuration
[    0.330000] pci 0000:00:00.0: reg 10: [mem 0x10000000-0x1000ffff 64bit]
[    0.330000] pci 0000:00:00.0: supports D1
[    0.330000] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    0.330000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    0.330000] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1000ffff 64bit]
[    0.340000] pci 0000:00:00.0: using irq 40 for pin 1
[    0.340000] Switching to clocksource MIPS
[    0.350000] NET: Registered protocol family 2
[    0.350000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
[    0.360000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
[    0.370000] TCP: Hash tables configured (established 512 bind 512)
[    0.370000] TCP: reno registered
[    0.380000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.380000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.390000] NET: Registered protocol family 1
[    0.390000] PCI: CLS 0 bytes, default 32
[    0.410000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.420000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.430000] msgmni has been set to 56
[    0.430000] io scheduler noop registered
[    0.440000] io scheduler deadline registered (default)
[    0.440000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    0.470000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
[    0.480000] console [ttyS0] enabled, bootconsole disabled
[    0.490000] ath79-spi ath79-spi: master is unqueued, this is deprecated
[    0.500000] m25p80 spi0.0: found s25fl064k, expected m25p80
[    0.500000] m25p80 spi0.0: s25fl064k (8192 Kbytes)
[    0.510000] 5 cmdlinepart partitions found on MTD device spi0.0
[    0.510000] Creating 5 MTD partitions on "spi0.0":
[    0.520000] 0x000000000000-0x000000040000 : "u-boot"
[    0.530000] 0x000000040000-0x000000050000 : "u-boot-env"
[    0.530000] 0x000000050000-0x0000007b0000 : "firmware"
[    0.550000] 2 uimage-fw partitions found on MTD device firmware
[    0.550000] 0x000000050000-0x00000014b34a : "kernel"
[    0.560000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.570000] 0x00000014b34a-0x0000007b0000 : "rootfs"
[    0.580000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.590000] mtd: partition "rootfs" set to be root filesystem
[    0.600000] 1 squashfs-split partitions found on MTD device rootfs
[    0.610000] 0x0000003e0000-0x0000007b0000 : "rootfs_data"
[    0.610000] 0x0000007b0000-0x0000007f0000 : "cfg"
[    0.620000] 0x0000007f0000-0x000000800000 : "EEPROM"
[    0.630000] libphy: ag71xx_mdio: probed
[    0.640000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
[    1.200000] ag71xx ag71xx.0 eth0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY]
[    1.210000] TCP: cubic registered
[    1.210000] NET: Registered protocol family 17
[    1.220000] Bridge firewalling registered
[    1.220000] 8021q: 802.1Q VLAN Support v1.8
[    1.230000] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
[    1.240000] Freeing unused kernel memory: 252K (80321000 - 80360000)
[    4.370000] usbcore: registered new interface driver usbfs
[    4.370000] usbcore: registered new interface driver hub
[    4.380000] usbcore: registered new device driver usb
[    4.390000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.400000] ehci-platform: EHCI generic platform driver
[    4.410000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    7.240000] eth0: link up (100Mbps/Full duplex)
[    7.930000] jffs2: notice: (292) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 24 of xref (0 dead, 8 orphan) found.
[    7.960000] eth0: link down
[   10.220000] NET: Registered protocol family 10
[   10.230000] tun: Universal TUN/TAP device driver, 1.6
[   10.240000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   10.270000] nf_conntrack version 0.5.0 (453 buckets, 1812 max)
[   10.290000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   10.350000] batman_adv: B.A.T.M.A.N. advanced 2014.1.0 (compatibility version 15) loaded
[   10.390000] Loading modules backported from Linux version master-2013-06-27-0-gdcfa6d5
[   10.400000] Backport generated by backports.git backports-20130617-4-ge3220f5
[   10.440000] Ebtables v2.0 registered
[   10.460000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   10.650000] xt_time: kernel timezone is -0000
[   10.770000] cfg80211: Calling CRDA to update world regulatory domain
[   10.770000] cfg80211: World regulatory domain updated:
[   10.780000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   10.790000] cfg80211:   (2400000 KHz - 2483000 KHz @ 40000 KHz), (N/A, 3000 mBm)
[   10.790000] cfg80211:   (5140000 KHz - 5860000 KHz @ 40000 KHz), (N/A, 3000 mBm)
[   10.850000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[   10.860000] ath: EEPROM regdomain: 0x0
[   10.860000] ath: EEPROM indicates default country code should be used
[   10.860000] ath: doing EEPROM country->regdmn map search
[   10.860000] ath: country maps to regdmn code: 0x3a
[   10.860000] ath: Country alpha2 being used: US
[   10.860000] ath: Regpair used: 0x3a
[   10.880000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   10.880000] cfg80211: Calling CRDA for country: US
[   10.890000] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xb0000000, irq=40
[   10.900000] cfg80211: Regulatory domain changed to country: US
[   10.900000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   10.910000] cfg80211:   (2400000 KHz - 2483000 KHz @ 40000 KHz), (N/A, 3000 mBm)
[   10.920000] cfg80211:   (5140000 KHz - 5860000 KHz @ 40000 KHz), (N/A, 3000 mBm)
[   15.790000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   15.790000] device eth0 entered promiscuous mode
[   15.800000] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[   15.830000] device br-lan entered promiscuous mode
[   15.840000] IPv6: ADDRCONF(NETDEV_UP): anygw: link is not ready
[   15.910000] IPv6: ADDRCONF(NETDEV_UP): eth0.11: link is not ready
[   15.950000] IPv6: ADDRCONF(NETDEV_UP): eth0.12: link is not ready
[   16.210000] batman_adv: bat0: Adding interface: eth0.11
[   16.220000] batman_adv: bat0: The MTU of interface eth0.11 is too small (1496) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1532 would solve the problem.
[   16.240000] batman_adv: bat0: Interface activated: eth0.11
[   16.250000] 8021q: adding VLAN 0 to HW filter on device bat0
[   16.290000] device bat0 entered promiscuous mode
[   16.290000] br-lan: port 2(bat0) entered forwarding state
[   16.300000] br-lan: port 2(bat0) entered forwarding state
[   16.300000] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   16.340000] IPv6: ADDRCONF(NETDEV_CHANGE): anygw: link becomes ready
[   16.400000] eth0: link up (100Mbps/Full duplex)
[   16.400000] br-lan: port 1(eth0) entered forwarding state
[   16.410000] br-lan: port 1(eth0) entered forwarding state
[   16.410000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   16.440000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.11: link becomes ready
[   16.440000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.12: link becomes ready
[   17.360000] batman_adv: bat0: bridge_loop_avoidance: Changing from: disabled to: enabled
[   17.400000] batman_adv: bat0: distributed_arp_table: Changing from: enabled to: disabled
[   18.300000] br-lan: port 2(bat0) entered forwarding state
[   18.410000] br-lan: port 1(eth0) entered forwarding state
[   21.330000] IPv6: ADDRCONF(NETDEV_UP): wlan0_ap: link is not ready
[   21.330000] IPv6: ADDRCONF(NETDEV_UP): wlan0_ap.12: link is not ready
[   26.240000] br-lan: received packet on bat0 with own address as source address
[   29.270000] device wlan0_ap entered promiscuous mode
[   29.310000] IPv6: ADDRCONF(NETDEV_UP): wlan0_ap.12: link is not ready
[   29.310000] IPv6: ADDRCONF(NETDEV_UP): wlan0_ap: link is not ready
[   29.330000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0_ap: link becomes ready
[   29.360000] br-lan: port 3(wlan0_ap) entered forwarding state
[   29.360000] br-lan: port 3(wlan0_ap) entered forwarding state
[   29.380000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0_ap.12: link becomes ready
[   31.360000] br-lan: port 3(wlan0_ap) entered forwarding state
[   32.940000] device wlan0_adhoc entered promiscuous mode
[   32.940000] IPv6: ADDRCONF(NETDEV_UP): wlan0_adhoc: link is not ready
[   32.960000] wlan0_adhoc: Created IBSS using preconfigured BSSID ca:fe:00:c0:ff:ee
[   32.970000] wlan0_adhoc: Creating new IBSS network, BSSID ca:fe:00:c0:ff:ee
[   32.980000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0_adhoc: link becomes ready
[   36.260000] br-lan: received packet on bat0 with own address as source address
[   46.280000] br-lan: received packet on bat0 with own address as source address
[   56.300000] br-lan: received packet on bat0 with own address as source address
[   66.320000] br-lan: received packet on bat0 with own address as source address
[   76.340000] br-lan: received packet on bat0 with own address as source address
[   86.360000] br-lan: received packet on bat0 with own address as source address
[   96.380000] br-lan: received packet on bat0 with own address as source address
[  106.400000] br-lan: received packet on bat0 with own address as source address
[  116.420000] br-lan: received packet on bat0 with own address as source address
[  126.440000] br-lan: received packet on bat0 with own address as source address