On Fri, Jun 12, 2009 at 2:08 PM, Marek Lindnerlindner_marek@yahoo.de wrote:
On Saturday 13 June 2009 01:19:51 Jacob Marble wrote:
Some of my nodes cannot see each other... For example, node 1 can battool ping node 2, but node 2 cannot battool ping node 1.
That would be pretty strange as batman always has to make sure that the connection goes in both directions. Can you post the originators output plus the batping result ?
I will when it happens again.
"cat ath0 > /proc/net/batman-adv/interfaces" produces: "Can't activate module: the primary interface is not active"
This message indicates that this nodes already has one interface which is not activate. Could you post "cat /proc/net/batman-adv/interfaces" after you get this result ?
"echo 'ath0' > interfaces" "cat interfaces" ath0
[ 97532] Adding interface: ath0 [ 97532] Can't activate module: the primary interface is not active [ 97534] Adding route towards: 00:15:6d:a7:6a:14 (via 00:15:6d:a7:6a:14) [ 97534] Creating new global hna entry: 00:ff:cf:5c:68:e0 (via 00:15:6d:a7:6a:14) [ 97535] Adding route towards: 00:15:6d:a7:6a:9c (via 00:15:6d:a7:6a:9c) [ 97535] Creating new global hna entry: 00:ff:a2:47:d9:c3 (via 00:15:6d:a7:6a:9c) [ 97539] Changing route towards: 00:15:6d:a7:6a:9c (now via 00:15:6d:a7:6a:14 - was via 00:15:6d:a7:6a:9c)
The node that can ping out, but not be pinged gave the following before it died:
"Could not read from deactivated interface <NULL>!"
Can you explain the exact steps to reproduce this behaviour ?
I will when it happens again.
Jake