[B.A.T.M.A.N.] Problems Multi radios

I am duplicating Shane Chao's setup with three nodes - the central one having two radios on different channels - each one on the same channel as one of the other two nodes. node 1 node 2 node 3 10.232.0.1 10.232.0.3 10.232.0.2 ------ ------ ------ wlan0 <--ch 50--> wlan0 wlan1 <--ch 58-> wlan1 When they are all on the same channel (and the central node is just using one radio), batman works fine - node 2 relays between the two (node 1 and node3 can't hear each other due to an obstruction). However when I get batman to run on both interfaces, I can no longer talk between node 1 and node 2 at all. In fact even if node 3 is turned off, just running batmand on both interfaces of node 2 stops it working. What is wierd is that node 1 can't seem to get its routes organised so that when it tries to send packets back to node 2, its gets (-d4 log):- Error - can't send requested ip to client (10.232.0.3): Network is unreachable It can hear packets coming from node 2 just fine. More log:- Received BATMAN packet via NB: 10.232.0.3, IF: wlan1 10.232.0.1 (from OG: 10.231.0.3, via old OG: 10.231.0.3, seqno 5126, tq 255, TTL 50, V 5, IDF 0) [ 5187150] HNA information received (1 HNA network): [ 5187150] hna: 10.232.0.3/32 [ 5187150] Creating new originator: 10.231.0.3 [ 5187150] updating last_seqno: old 0, new 5126 [ 5187150] Drop packet: OGM via unkown neighbor! I am not so much looking for someone to help me to debug this, just a confirmation that multiple interfaces does work OK. Damian -- Launtel - Plugging Tassie into the world Tel: 1800LAUNTEL (1800528683) Mob: 0418217582 Fax: 1300784109 http://www.launtel.net.au