On Tue, Oct 6, 2009 at 2:55 PM, Marek Lindner
<lindner_marek@yahoo.de> wrote:
Hi,
> you can find as attachment the dump on eth2 of GW (tcpdump -ni eth2 -s 0 -w
> gw.cap);
> the output of batctl td -p 4 eth1 is:
I could not find anything revealing in the logs you provided. Could you please
follow Sven's suggestion to log both ends as well ?
I could log on every interface; I will do it and send .cap files.
Just to not forget the obvious:
* What batman-adv version are you running ?
revision 1439
* GW1 routes the packets - does this work via NAT or do you manually add
GW1 routes packets, without NAT
routing entries to both ends ?
> A question: am I the first one with this problem?
AFAIK batman-adv has no problem transporting TCP traffic (unless you found an
undiscovered bug nobody has seen before). The most common source of trouble is
the configuration of the setup, in particular MTU settings or routing issues
(which is why most people simply bridge).
I understand your point about batman-adv; also for me, among batman nodes everything works fine.
I will also test the system with bridge on GW
andrea
Regards,
Marek