B.A.T.M.A.N

b.a.t.m.a.n@lists.open-mesh.org

15 participants
4308 discussions

[B.A.T.M.A.N.] [B.A.T.M.A.N] batman-adv : client to client communication
by liu muye 21 Nov '12

21 Nov '12

Thank you so much for your suggestions. Yes, we are using batman-adv. The one running as a kernel module. Just a few quick follow up questions. Our goal is to build an ad hoc mesh network. Each node may not have IP address. I can use batctl ping functionality to ping my peer with MAC address. Just wondering if I can send data packet to my peers with MAC address. I have noticed the packet.h file in the batctl source code contains several C structures. One of them is struct batadv_unicast_packet { struct batadv_header header; uint8_t ttvn; /* destination translation table version number */ uint8_t dest[ETH_ALEN]; } __packed; To send my data packet, I have to use this C structure. Is that correct? and where to look up the value for ttvn? Thanks for your time Have a nice day

1 0

[B.A.T.M.A.N.] batman-adv: node socket communication
by liu muye 21 Nov '12

21 Nov '12

This is Muye, I am a university student. Currently, we have a mesh network project using B.A.T.M.A.N. We are trying to establish wireless communication between each B.A.T.M.A.N client so that they can share information through the mesh network. Specifically, we want to write an application on top of the B.A.T.M.A.N using socket in order to transmit the data packet from one B.A.T.M.A.N client to other B.A.T.M.A.N client. For example, unicast or multicast. Would you please give us some advices on how to write such application. I have looked at the batctl ping and tcpdump source code, but I was not able to send data packet using the similar mechanism. We greatly appreciate any of your suggestions.

2 1

Re: [B.A.T.M.A.N.] Batman-adv compatibility with FullMAC devices
by Sven Eckelmann 21 Nov '12

21 Nov '12

On Wednesday 21 November 2012 13:49:48 ajeet singh wrote: [...] > 1: Does it support the FullMAC devices like AR6003? batman-adv doesn't care about the wifi device mac implementation. It just has to be a working implementation (aka working implementation in the mode you are using). I don't know whether the IBSS mode of AR6003 is broken or not. > 2: Is it possible to support gateway or bridge to extend the IBBS or to > provide internet access? I don't understand your question. I though you wanted to use batman-adv to "extend" the IBSS. Kind regards, Sven

1 0

[B.A.T.M.A.N.] [PATCH batctl-next] Revert "batctl: Print compat version when querying the version"
by Antonio Quartulli 21 Nov '12

21 Nov '12

This reverts commit a88e6b7b938ae201deba074e819b299ebb1c165f. Signed-off-by: Antonio Quartulli <ordex(a)autistici.org> --- Thanks Sven! main.c | 53 ++++++++++++----------------------------------------- 1 file changed, 12 insertions(+), 41 deletions(-) diff --git a/main.c b/main.c index e239b2a..5d85d8b 100644 --- a/main.c +++ b/main.c @@ -31,7 +31,6 @@ #include "main.h" #include "sys.h" #include "debug.h" -#include "debugfs.h" #include "ping.h" #include "translate.h" #include "traceroute.h" @@ -44,7 +43,6 @@ char mesh_dfl_iface[] = "bat0"; char module_ver_path[] = "/sys/module/batman_adv/version"; -char module_compat_ver_file[] = "batman_adv/compat_version"; void print_usage(void) { @@ -94,44 +92,6 @@ void print_usage(void) #endif } -static void print_version(void) -{ - int ret; - char *debugfs_mnt; - - printf("batctl %s [", SOURCE_VERSION); - - ret = read_file("", module_ver_path, USE_READ_BUFF | SILENCE_ERRORS, 0, 0, 0); - if ((line_ptr) && (line_ptr[strlen(line_ptr) - 1] == '\n')) - line_ptr[strlen(line_ptr) - 1] = '\0'; - - if (ret == EXIT_SUCCESS) { - printf("batman-adv: %s", line_ptr); - } else { - printf("module not loaded"); - goto out; - } - - free(line_ptr); - line_ptr = NULL; - - debugfs_mnt = debugfs_mount(NULL); - if (!debugfs_mnt) - goto out; - - ret = read_file(debugfs_mnt, module_compat_ver_file, USE_READ_BUFF | SILENCE_ERRORS, 0, 0, 0); - if ((line_ptr) && (line_ptr[strlen(line_ptr) - 1] == '\n')) - line_ptr[strlen(line_ptr) - 1] = '\0'; - - if (ret == EXIT_SUCCESS) - printf(", compat: %s", line_ptr); - -out: - free(line_ptr); - line_ptr = NULL; - printf("]\n"); -} - int main(int argc, char **argv) { int i, ret = EXIT_FAILURE; @@ -158,7 +118,18 @@ int main(int argc, char **argv) goto err; if (strcmp(argv[1], "-v") == 0) { - print_version(); + printf("batctl %s [batman-adv: ", SOURCE_VERSION); + + ret = read_file("", module_ver_path, USE_READ_BUFF | SILENCE_ERRORS, 0, 0, 0); + if ((line_ptr) && (line_ptr[strlen(line_ptr) - 1] == '\n')) + line_ptr[strlen(line_ptr) - 1] = '\0'; + + if (ret == EXIT_SUCCESS) + printf("%s]\n", line_ptr); + else + printf("module not loaded]\n"); + + free(line_ptr); exit(EXIT_SUCCESS); } -- 1.8.0

2 1

[B.A.T.M.A.N.] [PATCH next] Revert "batman-adv: export compatibility version via debugfs"
by Antonio Quartulli 21 Nov '12

21 Nov '12

This reverts commit 0679ec75758588e185ceec11e5823de65b427a6f. Conflicts: main.c main.h Signed-off-by: Antonio Quartulli <ordex(a)autistici.org> --- debugfs.c | 12 ------------ main.c | 12 ------------ main.h | 1 - 3 files changed, 25 deletions(-) diff --git a/debugfs.c b/debugfs.c index ae79b19..6f58ddd 100644 --- a/debugfs.c +++ b/debugfs.c @@ -245,16 +245,6 @@ static int batadv_algorithms_open(struct inode *inode, struct file *file) return single_open(file, batadv_algo_seq_print_text, NULL); } -/** - * batadv_compat_open - Prepare file handler for printing of the compat version - * @inode: inode which was opened - * @file: file handle to be initialized - */ -static int batadv_compat_open(struct inode *inode, struct file *file) -{ - return single_open(file, batadv_compat_seq_print_text, NULL); -} - static int batadv_originators_open(struct inode *inode, struct file *file) { struct net_device *net_dev = (struct net_device *)inode->i_private; @@ -337,11 +327,9 @@ struct batadv_debuginfo batadv_debuginfo_##_name = { \ * placed in the BATADV_DEBUGFS_SUBDIR subdirectory of debugfs */ static BATADV_DEBUGINFO(routing_algos, S_IRUGO, batadv_algorithms_open); -static BATADV_DEBUGINFO(compat_version, S_IRUGO, batadv_compat_open); static struct batadv_debuginfo *batadv_general_debuginfos[] = { &batadv_debuginfo_routing_algos, - &batadv_debuginfo_compat_version, NULL, }; diff --git a/main.c b/main.c index 253e240..f65a222 100644 --- a/main.c +++ b/main.c @@ -423,18 +423,6 @@ int batadv_algo_seq_print_text(struct seq_file *seq, void *offset) } /** - * batadv_compat_seq_print_text - print the compatibility version - * @seq: debugfs table seq_file struct - * @offset: not used - */ -int batadv_compat_seq_print_text(struct seq_file *seq, void *offset) -{ - seq_printf(seq, "%d\n", BATADV_COMPAT_VERSION); - - return 0; -} - -/** * batadv_skb_crc32 - calculate CRC32 of the whole packet and skip bytes in * the header * @skb: skb pointing to fragmented socket buffers diff --git a/main.h b/main.h index ec9c5ad..94de8ee 100644 --- a/main.h +++ b/main.h @@ -176,7 +176,6 @@ void batadv_recv_handler_unregister(uint8_t packet_type); int batadv_algo_register(struct batadv_algo_ops *bat_algo_ops); int batadv_algo_select(struct batadv_priv *bat_priv, char *name); int batadv_algo_seq_print_text(struct seq_file *seq, void *offset); -int batadv_compat_seq_print_text(struct seq_file *seq, void *offset); __be32 batadv_skb_crc32(struct sk_buff *skb, u8 *payload_ptr); /** -- 1.8.0

3 2

[B.A.T.M.A.N.] batman over 802.15.4 .
by Randy Graham 20 Nov '12

20 Nov '12

Hello, I have recently discovered batman-adv and am very interesting in getting it running on a custom embedded linux board we are developing. I have a couple of questions: 1. Will batman-adv work over 802.15.4 ? I have a microchip MRF24J40 802.15.4 module integrated on my linux board (3.7.0-rc6), and can bring up wpan-phy0 and lowpan0 interfaces. 2. Can batman-adv work with either of these interfaces ? I tried configuring these interfaces using 'batctl' but it complains that they are an unsupported type. 'iwconfig' reports these interfaces as having 'no wireless extensions' which I suspect is the issue. Please let me know if running b.a.t.m.a.n. over 802.15.4 is feasible. Thanks, -Randy

4 5

[B.A.T.M.A.N.] A batman-adv success story
by Gui Iribarren 19 Nov '12

19 Nov '12

Hey folks, Marek once asked on the IRC channel about our project, Mitar also asked for a proper introduction [0] And i get the feeling it would be nice to describe a small real world batman-adv implementation i've seen many times mails from people doing simulations or whatnot, to decide if batman-adv works as expected... and i guess they would appreciate reading about live use cases :) So here it goes, this thing started back in february 2012 [1] in Cordoba with Nico Echaniz et al Shortly after DeltaLibre followed, replicating the model. From the very beginning we aimed at building the cheapest possible, performant multi-radio mesh node. Ten months later, although there's still room for improvement, we are very happy looking back at the path that took us here :). Starting with the decision of choosing batman-adv, as explained in a spanish reply to Esteban Municio [2] ===translation=== 2012/9/10 Esteban Municio <emunicio en gmail.com>: > Was there any reason why you chose batman-adv over other protocol? Layer 2! no subnet configuration, "Just Works", it's easy to forget batman-adv is down there doing all the magic - A routing protocol that stays out of your way, is priceless. > which were your main issues working with batman-adv? With batman-adv... almost none :) Main difficulties until now were on phy level (interference) or layer 1 (hardware, drivers, firmware) With batman-adv, we bumped into 2 or 3 bugs, reported to the mailing list, and received prompt solutions thanks to the daily work that the developers put into it. Last version 2012.3.0 includes all those fixes. Pending issues are a strange behaviour where avahi packets are lost (can't assure batman-adv is the culprit) and an open ticket[3] about adding RAs mangling support to gw_mode, extending the DHCPv4 segmentation logic to SLAAC networks as well. As it is today, you can't put 2 ipv6 gateways doing SLAAC in the same batman-adv cloud. So far is not a showstopper for us, but we would love to be able to do that. ====== (for the record, that "strange avahi behaviour" seems solved with the CRC broadcast fixes in 2012.4.0 :D) Some numbers: with the hardware[4] we are using (TL-MR3220 and WN722N), throughput in point-to-point links maxes out at 30 or 40mbps respectively, on MISO HT20 With our dual-radio mesh nodes, we can sustain that transfer speed over 3 hops, using channels 1 and 11 for alternating interfaces. Given the small size of the networks, a longer path is currently not possible, but when using a single radio, or interfering channels, that same path throughput quickly drops to about 6 mbps, as predicted by the models. This is not news for many, but as said in the beginning of the email, i see some folks "doubting" about the performance, or overhead, of batman-adv... In tests we made, over a single hop (that is, from A to C as in A --> B --> C where point to point links reach ~30mbps), static routing reached 30mbps +/- 0.5mbps, and using batman-adv 29mbps +/- 0.5mbps A real bargain for the bat-benefits :) (i'm really sorry i can't provide supporting charts and logs ATM, collecting them would delay this email even further, and it's been months already since I have this email forgotten in drafts folder :( ) To easily share, publish and keep track of config tweaks between our networks we setup a hg repo [5][6] and eventually added bat-graphs for some basic context. [7] That can't possibly be maintained at a larger scale, but still proves incredibly useful at research stages. It has been used by an independent group (Gabriel Tolon et al) to compatibilize its equipments with DeltaLibre network at their lab, then bring the nodes into the region, plug, and Just Worked, with little intervention on our part. We pull the overlays with a bash hack named ruci[8] and use that too to push and stage experimental configs to the whole network without fear of locking us out because of a config mistake or typo. (i'm aware this has been addressed by multiple solutions, but ruci was born back in february while we didn't have a decent internet access to research previous art - we have changed tactics since then, trying to integrate with the rest of the movements :) ) Finally, some obligatory pictures [9] of representative (..?) nodes last months' smokeping stats [10] and cacti [11] and as a bonus, a crude video [12] filmed by Al Cano from guifi.net while visiting DeltaLibre back in May, enjoying seamless roaming along 6 nodes while literally navigating through the batman-adv mesh :) In QuintanaLibre (Quintana is a mountains *small* town with <500 habitants) you can spot kids using their OLPC netbooks while sitting in a (resting) horse' back. With almost no cellphone signal nor landlines whatsoever, you can imagine how much they appreciate having a WCN at their town. All this can't possibly express how grateful we are with you batpeople, but I hope it gives a glimpse ;) Cheers! Gui [0]: http://wlan-si.net/lists/arc/nodewatcher/2012-08/msg00005.html [1]: http://blog.altermundi.net/article/timeline-february-september-2012/ [2]: http://listas.altermundi.net/pipermail/redeslibres/2012-October/001438.html [3]: http://www.open-mesh.org/issues/159 [4]: http://docs.altermundi.net/MiniMaxi/Hardware [5]: https://bitbucket.org/guidoi/deltalibre-configs [6]: https://bitbucket.org/nicoechaniz/quintanalibre-configs [7]: https://bitbucket.org/guidoi/deltalibre-configs/src/tip/files/deltalibre_20… [8]: https://bitbucket.org/guidoi/ruci/ [9]: http://blog.altermundi.net/article/algunas-imagenes-de-deltalibre/ [10]: http://ping.deltalibre.org.ar/ [11]: http://graficas.deltalibre.org.ar/ [12]: http://es.wiki.guifi.net/wiki/Archivo:Paseo_en_canoa_conectado_a_BATMAN-adv…

3 3

[B.A.T.M.A.N.] pull request: batman-adv 2012-11-19
by Antonio Quartulli 19 Nov '12

19 Nov '12

Hello David, this should be our last batch of patches intended for net-next/linux-3.8. In this patchset we have patches 7,8/10 by Sven Eckelmann which improve the crc computation on broadcast packets (in the Bridge Loop Avoidance component) by using crc32c and by avoiding the entire linearisation of the skb! Then, patch 4/10 introduces a new debugfs file which exports the compatibility version so that users having different batman-adv releases can understand whether they can or cannot communicate. Patch 10/10 removes the packed attribute for the unicast message type and adds "#pragma pack(2)" (again, this is just part of our intermediate changes which do not break compatibility. The real restructure will come later..). The others are cleanups or small code refactoring. Let me know if there is any problem! Thank you, Antonio The following changes since commit 3594698a1fb8e5ae60a92c72ce9ca280256939a7: net: Make CAP_NET_BIND_SERVICE per user namespace (2012-11-18 20:33:37 -0500) are available in the git repository at: git://git.open-mesh.org/linux-merge.git tags/batman-adv-for-davem for you to fetch changes up to 15401e33ef94d4f251c42e8228e6c387327f38f8: batman-adv: Use packing of 2 for all headers before an ethernet header (2012-11-19 09:14:11 +0100) ---------------------------------------------------------------- Included changes: - Increase batman-adv version - Bridge Loop Avoidance: compute checksum (using crc32) on skb fragments instead of linearising it - sort the sysfs documentation - export the compatibility version via debugfs - some other minor cleanups ---------------------------------------------------------------- Antonio Quartulli (2): batman-adv: support array of debugfs general attributes batman-adv: export compatibility version via debugfs Marek Lindner (1): batman-adv: sysfs documentation should keep alphabetical order Martin Hundebøll (1): batman-adv: Add wrapper to look up neighbor and send skb Simon Wunderlich (2): batman-adv: fix bla compare function batman-adv: Fix broadcast duplist for fragmentation Sven Eckelmann (4): batman-adv: Mark best gateway in transtable_global debugfs batman-adv: Add function to calculate crc32c for the skb payload batman-adv: Start new development cycle batman-adv: Use packing of 2 for all headers before an ethernet header .../ABI/testing/sysfs-class-net-batman-adv | 11 +- Documentation/ABI/testing/sysfs-class-net-mesh | 40 +++--- net/batman-adv/Kconfig | 1 + net/batman-adv/bridge_loop_avoidance.c | 36 +++-- net/batman-adv/bridge_loop_avoidance.h | 6 +- net/batman-adv/debugfs.c | 46 ++++-- net/batman-adv/main.c | 46 ++++++ net/batman-adv/main.h | 4 +- net/batman-adv/packet.h | 16 ++- net/batman-adv/routing.c | 45 ++---- net/batman-adv/send.c | 33 +++++ net/batman-adv/send.h | 3 + net/batman-adv/translation-table.c | 155 +++++++++++---------- net/batman-adv/types.h | 2 +- net/batman-adv/unicast.c | 8 +- net/batman-adv/vis.c | 35 ++--- 16 files changed, 293 insertions(+), 194 deletions(-)

4 17

[B.A.T.M.A.N.] [PATCHv2 1/3] batman-adv: print the CRC together with the translation tables
by Antonio Quartulli 19 Nov '12

19 Nov '12

To simplify debugging operations, it is better to print the related CRC together with the translation table (local CRC for the local table and global CRC for each entry in the global table) Signed-off-by: Antonio Quartulli <ordex(a)autistici.org> --- v2: - patches have been rebased on top of the latest master translation-table.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/translation-table.c b/translation-table.c index 32d32d7..f60d37a 100644 --- a/translation-table.c +++ b/translation-table.c @@ -486,8 +486,9 @@ int batadv_tt_local_seq_print_text(struct seq_file *seq, void *offset) goto out; seq_printf(seq, - "Locally retrieved addresses (from %s) announced via TT (TTVN: %u):\n", - net_dev->name, (uint8_t)atomic_read(&bat_priv->tt.vn)); + "Locally retrieved addresses (from %s) announced via TT (TTVN: %u CRC: %#.4x):\n", + net_dev->name, (uint8_t)atomic_read(&bat_priv->tt.vn), + bat_priv->tt.local_crc); seq_printf(seq, " %-13s %-7s %-10s\n", "Client", "Flags", "Last seen"); @@ -982,10 +983,11 @@ batadv_tt_global_print_entry(struct batadv_tt_global_entry *tt_global_entry, best_entry = batadv_transtable_best_orig(tt_global_entry); if (best_entry) { last_ttvn = atomic_read(&best_entry->orig_node->last_ttvn); - seq_printf(seq, " %c %pM (%3u) via %pM (%3u) [%c%c%c]\n", + seq_printf(seq, + " %c %pM (%3u) via %pM (%3u) (%#.4x) [%c%c%c]\n", '*', tt_global_entry->common.addr, best_entry->ttvn, best_entry->orig_node->orig, - last_ttvn, + last_ttvn, best_entry->orig_node->tt_crc, (flags & BATADV_TT_CLIENT_ROAM ? 'R' : '.'), (flags & BATADV_TT_CLIENT_WIFI ? 'W' : '.'), (flags & BATADV_TT_CLIENT_TEMP ? 'T' : '.')); @@ -1027,8 +1029,9 @@ int batadv_tt_global_seq_print_text(struct seq_file *seq, void *offset) seq_printf(seq, "Globally announced TT entries received via the mesh %s\n", net_dev->name); - seq_printf(seq, " %-13s %s %-15s %s %s\n", - "Client", "(TTVN)", "Originator", "(Curr TTVN)", "Flags"); + seq_printf(seq, " %-13s %s %-15s %s (%-6s) %s\n", + "Client", "(TTVN)", "Originator", "(Curr TTVN)", "CRC", + "Flags"); for (i = 0; i < hash->size; i++) { head = &hash->table[i]; -- 1.8.0

2 5

[B.A.T.M.A.N.] [PATCH next] batman-adv: use batadv_compare_eth instead of memcmp
by Antonio Quartulli 19 Nov '12

19 Nov '12

When comparing ethernet address the batadv_compare_eth function has to be used instead of memcmp. This was introduced by 923d5d148cdd0928c9c5f8e0e2024f585dcf6efd ("batman-adv: fix bla compare function") Signed-off-by: Antonio Quartulli <ordex(a)autistici.org> --- bridge_loop_avoidance.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/bridge_loop_avoidance.c b/bridge_loop_avoidance.c index fc56ea2..5aebe93 100644 --- a/bridge_loop_avoidance.c +++ b/bridge_loop_avoidance.c @@ -79,7 +79,7 @@ static int batadv_compare_backbone_gw(const struct hlist_node *node, hash_entry); const struct batadv_backbone_gw *gw1 = data1, *gw2 = data2; - if (memcmp(gw1->orig, gw2->orig, ETH_ALEN)) + if (!batadv_compare_eth(gw1->orig, gw2->orig)) return 0; if (gw1->vid != gw2->vid) @@ -96,7 +96,7 @@ static int batadv_compare_claim(const struct hlist_node *node, hash_entry); const struct batadv_claim *cl1 = data1, *cl2 = data2; - if (memcmp(cl1->addr, cl2->addr, ETH_ALEN)) + if (!batadv_compare_eth(cl1->addr, cl2->addr)) return 0; if (cl1->vid != cl2->vid) -- 1.8.0

3 2

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

B.A.T.M.A.N