--- batman-adv_maint.batman_adv.h 2016-11-01 16:53:58.791618557 +0100 +++ alfred_maint.batman_adv.h 2016-11-01 16:53:58.879624431 +0100 @@ -1,208 +0,0 @@ -/* Copyright (C) 2016 B.A.T.M.A.N. contributors: - * - * Matthias Schiffer - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef _UAPI_LINUX_BATMAN_ADV_H_ -#define _UAPI_LINUX_BATMAN_ADV_H_ - -#define BATADV_NL_NAME "batadv" - -#define BATADV_NL_MCAST_GROUP_TPMETER "tpmeter" - -/** - * enum batadv_tt_client_flags - TT client specific flags - * @BATADV_TT_CLIENT_DEL: the client has to be deleted from the table - * @BATADV_TT_CLIENT_ROAM: the client roamed to/from another node and the new - * update telling its new real location has not been received/sent yet - * @BATADV_TT_CLIENT_WIFI: this client is connected through a wifi interface. - * This information is used by the "AP Isolation" feature - * @BATADV_TT_CLIENT_ISOLA: this client is considered "isolated". This - * information is used by the Extended Isolation feature - * @BATADV_TT_CLIENT_NOPURGE: this client should never be removed from the table - * @BATADV_TT_CLIENT_NEW: this client has been added to the local table but has - * not been announced yet - * @BATADV_TT_CLIENT_PENDING: this client is marked for removal but it is kept - * in the table for one more originator interval for consistency purposes - * @BATADV_TT_CLIENT_TEMP: this global client has been detected to be part of - * the network but no nnode has already announced it - * - * Bits from 0 to 7 are called _remote flags_ because they are sent on the wire. - * Bits from 8 to 15 are called _local flags_ because they are used for local - * computations only. - * - * Bits from 4 to 7 - a subset of remote flags - are ensured to be in sync with - * the other nodes in the network. To achieve this goal these flags are included - * in the TT CRC computation. - */ -enum batadv_tt_client_flags { - BATADV_TT_CLIENT_DEL = (1 << 0), - BATADV_TT_CLIENT_ROAM = (1 << 1), - BATADV_TT_CLIENT_WIFI = (1 << 4), - BATADV_TT_CLIENT_ISOLA = (1 << 5), - BATADV_TT_CLIENT_NOPURGE = (1 << 8), - BATADV_TT_CLIENT_NEW = (1 << 9), - BATADV_TT_CLIENT_PENDING = (1 << 10), - BATADV_TT_CLIENT_TEMP = (1 << 11), -}; - -/** - * enum batadv_nl_attrs - batman-adv netlink attributes - * - * @BATADV_ATTR_UNSPEC: unspecified attribute to catch errors - * @BATADV_ATTR_VERSION: batman-adv version string - * @BATADV_ATTR_ALGO_NAME: name of routing algorithm - * @BATADV_ATTR_MESH_IFINDEX: index of the batman-adv interface - * @BATADV_ATTR_MESH_IFNAME: name of the batman-adv interface - * @BATADV_ATTR_MESH_ADDRESS: mac address of the batman-adv interface - * @BATADV_ATTR_HARD_IFINDEX: index of the non-batman-adv interface - * @BATADV_ATTR_HARD_IFNAME: name of the non-batman-adv interface - * @BATADV_ATTR_HARD_ADDRESS: mac address of the non-batman-adv interface - * @BATADV_ATTR_ORIG_ADDRESS: originator mac address - * @BATADV_ATTR_TPMETER_RESULT: result of run (see batadv_tp_meter_status) - * @BATADV_ATTR_TPMETER_TEST_TIME: time (msec) the run took - * @BATADV_ATTR_TPMETER_BYTES: amount of acked bytes during run - * @BATADV_ATTR_TPMETER_COOKIE: session cookie to match tp_meter session - * @BATADV_ATTR_PAD: attribute used for padding for 64-bit alignment - * @BATADV_ATTR_ACTIVE: Flag indicating if the hard interface is active - * @BATADV_ATTR_TT_ADDRESS: Client MAC address - * @BATADV_ATTR_TT_TTVN: Translation table version - * @BATADV_ATTR_TT_LAST_TTVN: Previous translation table version - * @BATADV_ATTR_TT_CRC32: CRC32 over translation table - * @BATADV_ATTR_TT_VID: VLAN ID - * @BATADV_ATTR_TT_FLAGS: Translation table client flags - * @BATADV_ATTR_FLAG_BEST: Flags indicating entry is the best - * @BATADV_ATTR_LAST_SEEN_MSECS: Time in milliseconds since last seen - * @BATADV_ATTR_NEIGH_ADDRESS: Neighbour MAC address - * @BATADV_ATTR_TQ: TQ to neighbour - * @BATADV_ATTR_THROUGHPUT: Estimated throughput to Neighbour - * @BATADV_ATTR_BANDWIDTH_UP: Reported uplink bandwidth - * @BATADV_ATTR_BANDWIDTH_DOWN: Reported downlink bandwidth - * @BATADV_ATTR_ROUTER: Gateway router MAC address - * @BATADV_ATTR_BLA_OWN: Flag indicating own originator - * @BATADV_ATTR_BLA_ADDRESS: Bridge loop avoidance claim MAC address - * @BATADV_ATTR_BLA_VID: BLA VLAN ID - * @BATADV_ATTR_BLA_BACKBONE: BLA gateway originator MAC address - * @BATADV_ATTR_BLA_CRC: BLA CRC - * @__BATADV_ATTR_AFTER_LAST: internal use - * @NUM_BATADV_ATTR: total number of batadv_nl_attrs available - * @BATADV_ATTR_MAX: highest attribute number currently defined - */ -enum batadv_nl_attrs { - BATADV_ATTR_UNSPEC, - BATADV_ATTR_VERSION, - BATADV_ATTR_ALGO_NAME, - BATADV_ATTR_MESH_IFINDEX, - BATADV_ATTR_MESH_IFNAME, - BATADV_ATTR_MESH_ADDRESS, - BATADV_ATTR_HARD_IFINDEX, - BATADV_ATTR_HARD_IFNAME, - BATADV_ATTR_HARD_ADDRESS, - BATADV_ATTR_ORIG_ADDRESS, - BATADV_ATTR_TPMETER_RESULT, - BATADV_ATTR_TPMETER_TEST_TIME, - BATADV_ATTR_TPMETER_BYTES, - BATADV_ATTR_TPMETER_COOKIE, - BATADV_ATTR_PAD, - BATADV_ATTR_ACTIVE, - BATADV_ATTR_TT_ADDRESS, - BATADV_ATTR_TT_TTVN, - BATADV_ATTR_TT_LAST_TTVN, - BATADV_ATTR_TT_CRC32, - BATADV_ATTR_TT_VID, - BATADV_ATTR_TT_FLAGS, - BATADV_ATTR_FLAG_BEST, - BATADV_ATTR_LAST_SEEN_MSECS, - BATADV_ATTR_NEIGH_ADDRESS, - BATADV_ATTR_TQ, - BATADV_ATTR_THROUGHPUT, - BATADV_ATTR_BANDWIDTH_UP, - BATADV_ATTR_BANDWIDTH_DOWN, - BATADV_ATTR_ROUTER, - BATADV_ATTR_BLA_OWN, - BATADV_ATTR_BLA_ADDRESS, - BATADV_ATTR_BLA_VID, - BATADV_ATTR_BLA_BACKBONE, - BATADV_ATTR_BLA_CRC, - /* add attributes above here, update the policy in netlink.c */ - __BATADV_ATTR_AFTER_LAST, - NUM_BATADV_ATTR = __BATADV_ATTR_AFTER_LAST, - BATADV_ATTR_MAX = __BATADV_ATTR_AFTER_LAST - 1 -}; - -/** - * enum batadv_nl_commands - supported batman-adv netlink commands - * - * @BATADV_CMD_UNSPEC: unspecified command to catch errors - * @BATADV_CMD_GET_MESH_INFO: Query basic information about batman-adv device - * @BATADV_CMD_TP_METER: Start a tp meter session - * @BATADV_CMD_TP_METER_CANCEL: Cancel a tp meter session - * @BATADV_CMD_GET_ROUTING_ALGOS: Query the list of routing algorithms. - * @BATADV_CMD_GET_HARDIFS: Query list of hard interfaces - * @BATADV_CMD_GET_TRANSTABLE_LOCAL: Query list of local translations - * @BATADV_CMD_GET_TRANSTABLE_GLOBAL Query list of global translations - * @BATADV_CMD_GET_ORIGINATORS: Query list of originators - * @BATADV_CMD_GET_NEIGHBORS: Query list of neighbours - * @BATADV_CMD_GET_GATEWAYS: Query list of gateways - * @BATADV_CMD_GET_BLA_CLAIM: Query list of bridge loop avoidance claims - * @BATADV_CMD_GET_BLA_BACKBONE: Query list of bridge loop avoidance backbones - * @__BATADV_CMD_AFTER_LAST: internal use - * @BATADV_CMD_MAX: highest used command number - */ -enum batadv_nl_commands { - BATADV_CMD_UNSPEC, - BATADV_CMD_GET_MESH_INFO, - BATADV_CMD_TP_METER, - BATADV_CMD_TP_METER_CANCEL, - BATADV_CMD_GET_ROUTING_ALGOS, - BATADV_CMD_GET_HARDIFS, - BATADV_CMD_GET_TRANSTABLE_LOCAL, - BATADV_CMD_GET_TRANSTABLE_GLOBAL, - BATADV_CMD_GET_ORIGINATORS, - BATADV_CMD_GET_NEIGHBORS, - BATADV_CMD_GET_GATEWAYS, - BATADV_CMD_GET_BLA_CLAIM, - BATADV_CMD_GET_BLA_BACKBONE, - /* add new commands above here */ - __BATADV_CMD_AFTER_LAST, - BATADV_CMD_MAX = __BATADV_CMD_AFTER_LAST - 1 -}; - -/** - * enum batadv_tp_meter_reason - reason of a tp meter test run stop - * @BATADV_TP_REASON_COMPLETE: sender finished tp run - * @BATADV_TP_REASON_CANCEL: sender was stopped during run - * @BATADV_TP_REASON_DST_UNREACHABLE: receiver could not be reached or didn't - * answer - * @BATADV_TP_REASON_RESEND_LIMIT: (unused) sender retry reached limit - * @BATADV_TP_REASON_ALREADY_ONGOING: test to or from the same node already - * ongoing - * @BATADV_TP_REASON_MEMORY_ERROR: test was stopped due to low memory - * @BATADV_TP_REASON_CANT_SEND: failed to send via outgoing interface - * @BATADV_TP_REASON_TOO_MANY: too many ongoing sessions - */ -enum batadv_tp_meter_reason { - BATADV_TP_REASON_COMPLETE = 3, - BATADV_TP_REASON_CANCEL = 4, - /* error status >= 128 */ - BATADV_TP_REASON_DST_UNREACHABLE = 128, - BATADV_TP_REASON_RESEND_LIMIT = 129, - BATADV_TP_REASON_ALREADY_ONGOING = 130, - BATADV_TP_REASON_MEMORY_ERROR = 131, - BATADV_TP_REASON_CANT_SEND = 132, - BATADV_TP_REASON_TOO_MANY = 133, -}; - -#endif /* _UAPI_LINUX_BATMAN_ADV_H_ */