Signed-off-by: Sven Eckelmann sven@narfation.org --- v2: fixed "NodeA" in NodeB block

Documentation/networking/batman-adv.txt | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/Documentation/networking/batman-adv.txt b/Documentation/networking/batman-adv.txt index 58e4904..ff23b75 100644 --- a/Documentation/networking/batman-adv.txt +++ b/Documentation/networking/batman-adv.txt @@ -115,14 +115,17 @@ The "bat0" interface can be used like any other regular inter- face. It needs an IP address which can be either statically con- figured or dynamically (by using DHCP or similar services):

-# NodeA: ifconfig bat0 192.168.0.1 -# NodeB: ifconfig bat0 192.168.0.2 +# NodeA: ip link set up dev bat0 +# NodeA: ip addr add 192.168.0.1/24 dev bat0 + +# NodeB: ip link set up dev bat0 +# NodeB: ip addr add 192.168.0.2/24 dev bat0 # NodeB: ping 192.168.0.1

Note: In order to avoid problems remove all IP addresses previ- ously assigned to interfaces now used by batman advanced, e.g.

-# ifconfig eth0 0.0.0.0 +# ip addr flush dev eth0

LOGGING/DEBUGGING