David S. Miller did not like the idea of batman-adv modifying and reading the ARP table and refused to pull this feature. It has to be rewritten after an acceptable solution was found.
This reverts following commits: * batman-adv: add UNICAST_4ADDR packet type * batman-adv: add a new log level for DAT debugging * batman-adv: Distributed ARP Table - create DHT helper functions * batman-adv: Distributed ARP Table - add ARP parsing functions * batman-adv: Distributed ARP Table - add snooping functions for ARP messages * batman-adv: Distributed ARP Table - increase default soft_iface ARP table timeout * batman-adv: Distributed ARP Table - add compile option
Signed-off-by: Sven Eckelmann sven@narfation.org --- This patch is for next... I repeat: this patch is for the branch next
Makefile | 2 - Makefile.kbuild | 1 - README | 3 +- README.external | 1 - bat_sysfs.c | 2 +- distributed-arp-table.c | 605 ----------------------------------------------- distributed-arp-table.h | 140 ----------- gen-compat-autoconf.sh | 1 - hard-interface.c | 3 - main.c | 2 - main.h | 15 +- originator.c | 2 - packet.h | 30 +-- routing.c | 8 +- send.c | 4 - soft-interface.c | 17 +- types.h | 22 -- unicast.c | 101 ++------ unicast.h | 21 +- 19 files changed, 33 insertions(+), 947 deletions(-) delete mode 100644 distributed-arp-table.c delete mode 100644 distributed-arp-table.h
diff --git a/Makefile b/Makefile index ac84fba..08f8c39 100644 --- a/Makefile +++ b/Makefile @@ -23,8 +23,6 @@ export CONFIG_BATMAN_ADV_DEBUG=n # B.A.T.M.A.N. bridge loop avoidance: export CONFIG_BATMAN_ADV_BLA=y -# B.A.T.M.A.N. distributed ARP table: -export CONFIG_BATMAN_ADV_DAT=y
PWD:=$(shell pwd) KERNELPATH ?= /lib/modules/$(shell uname -r)/build diff --git a/Makefile.kbuild b/Makefile.kbuild index ad002cd..6d5c194 100644 --- a/Makefile.kbuild +++ b/Makefile.kbuild @@ -24,7 +24,6 @@ batman-adv-y += bat_iv_ogm.o batman-adv-y += bat_sysfs.o batman-adv-y += bitarray.o batman-adv-$(CONFIG_BATMAN_ADV_BLA) += bridge_loop_avoidance.o -batman-adv-$(CONFIG_BATMAN_ADV_DAT) += distributed-arp-table.o batman-adv-y += gateway_client.o batman-adv-y += gateway_common.o batman-adv-y += hard-interface.o diff --git a/README b/README index 82c075f..75a5923 100644 --- a/README +++ b/README @@ -202,8 +202,7 @@ abled during run time. Following log_levels are defined: 2 - Enable messages related to route added / changed / deleted 4 - Enable messages related to translation table operations 8 - Enable messages related to bridge loop avoidance -16 - Enable messaged related to DAT, ARP snooping and parsing -31 - Enable all messages +15 - enable all messages
The debug output can be changed at runtime using the file /sys/class/net/bat0/mesh/log_level. e.g. diff --git a/README.external b/README.external index 874ee7f..da5afd4 100644 --- a/README.external +++ b/README.external @@ -37,7 +37,6 @@ module). Available options and their possible values are
* CONFIG_BATMAN_ADV_DEBUG=[y|n*] (B.A.T.M.A.N. debugging) * CONFIG_BATMAN_ADV_BLA=[y*|n] (B.A.T.M.A.N. bridge loop avoidance) - * CONFIG_BATMAN_ADV_DAT=[y*|n] (B.A.T.M.A.N. Distributed ARP Table)
e.g., debugging can be enabled by
diff --git a/bat_sysfs.c b/bat_sysfs.c index acb2640..5bc7b66 100644 --- a/bat_sysfs.c +++ b/bat_sysfs.c @@ -445,7 +445,7 @@ BAT_ATTR_SIF_UINT(gw_sel_class, S_IRUGO | S_IWUSR, 1, TQ_MAX_VALUE, static BAT_ATTR(gw_bandwidth, S_IRUGO | S_IWUSR, show_gw_bwidth, store_gw_bwidth); #ifdef CONFIG_BATMAN_ADV_DEBUG -BAT_ATTR_SIF_UINT(log_level, S_IRUGO | S_IWUSR, 0, 31, NULL); +BAT_ATTR_SIF_UINT(log_level, S_IRUGO | S_IWUSR, 0, 15, NULL); #endif
static struct bat_attribute *mesh_attrs[] = { diff --git a/distributed-arp-table.c b/distributed-arp-table.c deleted file mode 100644 index 6935be9..0000000 --- a/distributed-arp-table.c +++ /dev/null @@ -1,605 +0,0 @@ -/* - * Copyright (C) 2011-2012 B.A.T.M.A.N. contributors: - * - * Antonio Quartulli - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of version 2 of the GNU General Public - * License as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA - * - */ - -#include <linux/if_ether.h> -#include <linux/if_arp.h> -/* needed to use arp_tbl */ -#include <net/arp.h> -#include <linux/inetdevice.h> - -#include "main.h" -#include "distributed-arp-table.h" -#include "hard-interface.h" -#include "originator.h" -#include "send.h" -#include "types.h" -#include "translation-table.h" -#include "unicast.h" - -#ifdef CONFIG_BATMAN_ADV_DEBUG - -static void bat_dbg_arp(struct bat_priv *bat_priv, struct sk_buff *skb, - uint16_t type, int hdr_size, char *msg) -{ - struct unicast_4addr_packet *unicast_4addr_packet; - - if (msg) - bat_dbg(DBG_DAT, bat_priv, "%s\n", msg); - - bat_dbg(DBG_DAT, bat_priv, "ARP MSG = [src: %pM-%pI4 dst: %pM-%pI4]\n", - ARP_HW_SRC(skb, hdr_size), &ARP_IP_SRC(skb, hdr_size), - ARP_HW_DST(skb, hdr_size), &ARP_IP_DST(skb, hdr_size)); - - if (hdr_size == 0) - return; - - /* if the AP packet is encapsulated in a batman packet, let's print some - * debug messages - */ - unicast_4addr_packet = (struct unicast_4addr_packet *)skb->data; - - switch (unicast_4addr_packet->u.header.packet_type) { - case BAT_UNICAST: - bat_dbg(DBG_DAT, bat_priv, - "* encapsulated within a UNICAST packet\n"); - break; - case BAT_UNICAST_4ADDR: - bat_dbg(DBG_DAT, bat_priv, - "* encapsulated within a UNICAST_4ADDR packet (src: %pM)\n", - unicast_4addr_packet->src); - switch (unicast_4addr_packet->subtype) { - case BAT_P_DAT_DHT_PUT: - bat_dbg(DBG_DAT, bat_priv, "* type: DAT_DHT_PUT\n"); - break; - case BAT_P_DAT_DHT_GET: - bat_dbg(DBG_DAT, bat_priv, "* type: DAT_DHT_GET\n"); - break; - case BAT_P_DAT_CACHE_REPLY: - bat_dbg(DBG_DAT, bat_priv, "* type: DAT_CACHE_REPLY\n"); - break; - case BAT_P_DATA: - bat_dbg(DBG_DAT, bat_priv, "* type: DATA\n"); - break; - default: - bat_dbg(DBG_DAT, bat_priv, "* type: Unknown!\n"); - } - break; - case BAT_BCAST: - bat_dbg(DBG_DAT, bat_priv, - "* encapsulated within a BCAST packet (src: %pM)\n", - ((struct bcast_packet *)unicast_4addr_packet)->orig); - break; - default: - bat_dbg(DBG_DAT, bat_priv, - "* encapsulated within an unknown packet type (0x%x)\n", - unicast_4addr_packet->u.header.packet_type); - } -} - -#else - -static void bat_dbg_arp(struct bat_priv *bat_priv, struct sk_buff *skb, - uint16_t type, int hdr_size, char *msg) -{ -} - -#endif /* CONFIG_BATMAN_ADV_DEBUG */ - -static bool is_orig_node_eligible(struct dht_candidate *res, int select, - dat_addr_t tmp_max, dat_addr_t max, - dat_addr_t last_max, - struct orig_node *candidate, - struct orig_node *max_orig_node) -{ - bool ret = false; - int j; - - /* Check if we have already selected this neighbour... */ - for (j = 0; j < select; j++) - if (res[j].orig_node == candidate) - break; - /* ..and possibly skip it */ - if (j < select) - goto out; - /* sanity check: has it already been selected? This should not happen */ - if (tmp_max > last_max) - goto out; - /* check if during this iteration we have already found an originator - * with a closer dht address - */ - if (tmp_max < max) - goto out; - /* this is an hash collision with the temporary selected node. Choose - * the one with the lowest address - */ - if ((tmp_max == max) && - (compare_eth(candidate->orig, max_orig_node->orig) > 0)) - goto out; - - ret = true; -out: - return ret; -} - -/* selects the next candidate by populating cands[select] and modifies last_max - * accordingly - */ -static void choose_next_candidate(struct bat_priv *bat_priv, - struct dht_candidate *cands, int select, - dat_addr_t ip_key, dat_addr_t *last_max) -{ - dat_addr_t max = 0, tmp_max = 0; - struct orig_node *orig_node, *max_orig_node = NULL; - struct hashtable_t *hash = bat_priv->orig_hash; - struct hlist_node *node; - struct hlist_head *head; - int i; - - /* if no node is eligible as candidate, we will leave the candidate as - * NOT_FOUND - */ - cands[select].type = DHT_CANDIDATE_NOT_FOUND; - - /* iterate over the originator list and find the node with closest - * dht_address which has not been selected yet - */ - for (i = 0; i < hash->size; i++) { - head = &hash->table[i]; - - rcu_read_lock(); - hlist_for_each_entry_rcu(orig_node, node, head, hash_entry) { - /* the dht space is a ring and addresses are unsigned */ - tmp_max = DAT_ADDR_MAX - orig_node->dht_addr + ip_key; - - if (!is_orig_node_eligible(cands, select, tmp_max, max, - *last_max, orig_node, - max_orig_node)) - continue; - - if (!atomic_inc_not_zero(&orig_node->refcount)) - continue; - - max = tmp_max; - if (max_orig_node) - orig_node_free_ref(max_orig_node); - max_orig_node = orig_node; - } - rcu_read_unlock(); - } - if (max_orig_node) { - cands[select].type = DHT_CANDIDATE_ORIG; - cands[select].orig_node = max_orig_node; - bat_dbg(DBG_DAT, bat_priv, - "dht_select_candidates() %d: selected %pM addr=%u dist=%u\n", - select, max_orig_node->orig, max_orig_node->dht_addr, - max); - } - *last_max = max; -} - -/* Given a key, selects the candidates which the DHT message has to be sent to. - * An originator O is selected if and only if its DHT_ID value is one of three - * closest values (from the LEFT, with wrap around if needed) then the hash - * value of the key. ip_dst is the key. - * - * return an array of size DHT_CANDIDATES_NUM - */ -static struct dht_candidate *dht_select_candidates(struct bat_priv *bat_priv, - uint32_t ip_dst) -{ - int select; - dat_addr_t last_max = DAT_ADDR_MAX, ip_key; - struct dht_candidate *res; - - if (!bat_priv->orig_hash) - return NULL; - - res = kmalloc(DHT_CANDIDATES_NUM * sizeof(*res), GFP_ATOMIC); - if (!res) - return NULL; - - ip_key = (dat_addr_t)hash_ipv4(&ip_dst, DAT_ADDR_MAX); - - bat_dbg(DBG_DAT, bat_priv, - "dht_select_candidates(): IP=%pI4 hash(IP)=%u\n", &ip_dst, - ip_key); - - for (select = 0; select < DHT_CANDIDATES_NUM; select++) - choose_next_candidate(bat_priv, res, select, ip_key, &last_max); - - return res; -} - -/* Sends the skb payload passed as argument to the candidates selected for - * the data represented by 'ip'. The skb is copied by means of pskb_copy() - * and is sent as unicast packet to each of the selected candidate. - * - * If the packet is successfully sent to at least one candidate, then this - * function returns true - */ -static bool dht_send_data(struct bat_priv *bat_priv, struct sk_buff *skb, - uint32_t ip, int packet_subtype) -{ - int i; - bool ret = false; - struct neigh_node *neigh_node = NULL; - struct sk_buff *tmp_skb; - struct dht_candidate *cand = dht_select_candidates(bat_priv, ip); - - if (!cand) - goto out; - - bat_dbg(DBG_DAT, bat_priv, "DHT_SEND for %pI4\n", &ip); - - for (i = 0; i < DHT_CANDIDATES_NUM; i++) { - if (cand[i].type == DHT_CANDIDATE_NOT_FOUND) - continue; - - neigh_node = orig_node_get_router(cand[i].orig_node); - if (!neigh_node) - goto free_orig; - - tmp_skb = pskb_copy(skb, GFP_ATOMIC); - if (!prepare_unicast_4addr_packet(bat_priv, tmp_skb, - cand[i].orig_node, - packet_subtype)) { - kfree_skb(tmp_skb); - goto free_neigh; - } - if (send_skb_packet(tmp_skb, neigh_node->if_incoming, - neigh_node->addr) == NET_XMIT_SUCCESS) - /* packet sent to a candidate: we can return true */ - ret = true; -free_neigh: - neigh_node_free_ref(neigh_node); -free_orig: - orig_node_free_ref(cand[i].orig_node); - } - -out: - kfree(cand); - return ret; -} - -/* Update the neighbour entry corresponding to the IP passed as parameter with - * the hw address hw. If the neighbour entry doesn't exists, then it will be - * created - */ -static void arp_neigh_update(struct bat_priv *bat_priv, uint32_t ip, - uint8_t *hw) -{ - struct neighbour *n = NULL; - struct hard_iface *primary_if = primary_if_get_selected(bat_priv); - if (!primary_if) - goto out; - - n = __neigh_lookup(&arp_tbl, &ip, primary_if->soft_iface, 1); - if (!n) - goto out; - - bat_dbg(DBG_DAT, bat_priv, "Updating neighbour: %pI4 - %pM\n", &ip, hw); - - neigh_update(n, hw, NUD_REACHABLE, NEIGH_UPDATE_F_OVERRIDE); -out: - if (n && !IS_ERR(n)) - neigh_release(n); - if (primary_if) - hardif_free_ref(primary_if); -} - -/* Returns arphdr->ar_op if the skb contains a valid ARP packet, otherwise - * returns 0 - */ -static uint16_t arp_get_type(struct bat_priv *bat_priv, struct sk_buff *skb, - int hdr_size) -{ - struct arphdr *arphdr; - struct ethhdr *ethhdr; - uint32_t ip_src, ip_dst; - uint16_t type = 0; - - /* pull the ethernet header */ - if (unlikely(!pskb_may_pull(skb, hdr_size + ETH_HLEN))) - goto out; - - ethhdr = (struct ethhdr *)(skb->data + hdr_size); - - if (ethhdr->h_proto != htons(ETH_P_ARP)) - goto out; - - /* pull the ARP payload */ - if (unlikely(!pskb_may_pull(skb, hdr_size + ETH_HLEN + - arp_hdr_len(skb->dev)))) - goto out; - - arphdr = (struct arphdr *)(skb->data + hdr_size + ETH_HLEN); - - /* Check whether the ARP packet carries a valid - * IP information */ - if (arphdr->ar_hrd != htons(ARPHRD_ETHER)) - goto out; - - if (arphdr->ar_pro != htons(ETH_P_IP)) - goto out; - - if (arphdr->ar_hln != ETH_ALEN) - goto out; - - if (arphdr->ar_pln != 4) - goto out; - - /* Check for bad reply/request. If the ARP message is not sane, DAT - * will simply ignore it */ - ip_src = ARP_IP_SRC(skb, hdr_size); - ip_dst = ARP_IP_DST(skb, hdr_size); - if (ipv4_is_loopback(ip_src) || ipv4_is_multicast(ip_src) || - ipv4_is_loopback(ip_dst) || ipv4_is_multicast(ip_dst)) - goto out; - - type = ntohs(arphdr->ar_op); -out: - return type; -} - -/* return true if the message has been sent to the dht candidates, false - * otherwise. In case of true the message has to be enqueued to permit the - * fallback - */ -bool dat_snoop_outgoing_arp_request(struct bat_priv *bat_priv, - struct sk_buff *skb) -{ - uint16_t type = 0; - uint32_t ip_dst, ip_src; - uint8_t *hw_src; - bool ret = false; - struct neighbour *n = NULL; - struct hard_iface *primary_if = NULL; - struct sk_buff *skb_new; - - type = arp_get_type(bat_priv, skb, 0); - /* If we get an ARP_REQUEST we have to send the unicast message to the - * selected DHT candidates - */ - if (type != ARPOP_REQUEST) - goto out; - - bat_dbg_arp(bat_priv, skb, type, 0, "Parsing outgoing ARP REQUEST"); - - ip_src = ARP_IP_SRC(skb, 0); - hw_src = ARP_HW_SRC(skb, 0); - ip_dst = ARP_IP_DST(skb, 0); - - primary_if = primary_if_get_selected(bat_priv); - if (!primary_if) - goto out; - - arp_neigh_update(bat_priv, ip_src, hw_src); - - n = neigh_lookup(&arp_tbl, &ip_dst, primary_if->soft_iface); - /* check if it is a valid neigh entry */ - if (n && (n->nud_state & NUD_CONNECTED)) { - skb_new = arp_create(ARPOP_REPLY, ETH_P_ARP, ip_src, - primary_if->soft_iface, ip_dst, hw_src, - n->ha, hw_src); - if (!skb_new) - goto out; - - skb_reset_mac_header(skb_new); - skb_new->protocol = eth_type_trans(skb_new, - primary_if->soft_iface); - bat_priv->stats.rx_packets++; - bat_priv->stats.rx_bytes += skb->len + ETH_HLEN; - primary_if->soft_iface->last_rx = jiffies; - - netif_rx(skb_new); - bat_dbg(DBG_DAT, bat_priv, "ARP request replied locally\n"); - } else - /* Send the request on the DHT */ - ret = dht_send_data(bat_priv, skb, ip_dst, BAT_P_DAT_DHT_GET); -out: - if (n) - neigh_release(n); - if (primary_if) - hardif_free_ref(primary_if); - return ret; -} - -/* This function is meant to be invoked for an ARP request which is coming into - * the bat0 interfaces from the mesh network. It will check for the needed data - * into the local table. If found, an ARP reply is sent immediately, otherwise - * the caller has to deliver the ARP request to the upper layer - */ -bool dat_snoop_incoming_arp_request(struct bat_priv *bat_priv, - struct sk_buff *skb, int hdr_size) -{ - uint16_t type; - uint32_t ip_src, ip_dst; - uint8_t *hw_src; - struct hard_iface *primary_if = NULL; - struct sk_buff *skb_new; - struct neighbour *n = NULL; - bool ret = false; - - type = arp_get_type(bat_priv, skb, hdr_size); - if (type != ARPOP_REQUEST) - goto out; - - hw_src = ARP_HW_SRC(skb, hdr_size); - ip_src = ARP_IP_SRC(skb, hdr_size); - ip_dst = ARP_IP_DST(skb, hdr_size); - - bat_dbg_arp(bat_priv, skb, type, hdr_size, - "Parsing incoming ARP REQUEST"); - - primary_if = primary_if_get_selected(bat_priv); - if (!primary_if) - goto out; - - arp_neigh_update(bat_priv, ip_src, hw_src); - - n = neigh_lookup(&arp_tbl, &ip_dst, primary_if->soft_iface); - /* check if it is a valid neigh entry */ - if (!n || !(n->nud_state & NUD_CONNECTED)) - goto out; - - skb_new = arp_create(ARPOP_REPLY, ETH_P_ARP, ip_src, - primary_if->soft_iface, ip_dst, hw_src, n->ha, - hw_src); - - if (!skb_new) - goto out; - - unicast_4addr_send_skb(skb_new, bat_priv, BAT_P_DAT_CACHE_REPLY); - - ret = true; -out: - if (n) - neigh_release(n); - if (primary_if) - hardif_free_ref(primary_if); - if (ret) - kfree_skb(skb); - return ret; -} - -/* This function is meant to be invoked on an ARP reply packet going into the - * soft interface. The related neighbour entry has to be updated and the DHT has - * to be populated as well - */ -bool dat_snoop_outgoing_arp_reply(struct bat_priv *bat_priv, - struct sk_buff *skb) -{ - uint16_t type; - uint32_t ip_src, ip_dst; - uint8_t *hw_src, *hw_dst; - bool ret = false; - - type = arp_get_type(bat_priv, skb, 0); - if (type != ARPOP_REPLY) - goto out; - - bat_dbg_arp(bat_priv, skb, type, 0, "Parsing outgoing ARP REPLY"); - - hw_src = ARP_HW_SRC(skb, 0); - ip_src = ARP_IP_SRC(skb, 0); - hw_dst = ARP_HW_DST(skb, 0); - ip_dst = ARP_IP_DST(skb, 0); - - arp_neigh_update(bat_priv, ip_src, hw_src); - arp_neigh_update(bat_priv, ip_dst, hw_dst); - - /* Send the ARP reply to the candidates for both the IP addresses we - * fetched from the ARP reply - */ - dht_send_data(bat_priv, skb, ip_src, BAT_P_DAT_DHT_PUT); - dht_send_data(bat_priv, skb, ip_dst, BAT_P_DAT_DHT_PUT); - ret = true; -out: - return ret; -} - -/* This function has to be invoked on an ARP reply coming into the soft - * interface from the mesh network. The local table has to be updated - */ -bool dat_snoop_incoming_arp_reply(struct bat_priv *bat_priv, - struct sk_buff *skb, int hdr_size) -{ - uint16_t type; - uint32_t ip_src, ip_dst; - uint8_t *hw_src, *hw_dst; - bool ret = false; - - type = arp_get_type(bat_priv, skb, hdr_size); - if (type != ARPOP_REPLY) - goto out; - - bat_dbg_arp(bat_priv, skb, type, hdr_size, - "Parsing incoming ARP REPLY"); - - hw_src = ARP_HW_SRC(skb, hdr_size); - ip_src = ARP_IP_SRC(skb, hdr_size); - hw_dst = ARP_HW_DST(skb, hdr_size); - ip_dst = ARP_IP_DST(skb, hdr_size); - - /* Update our internal cache with both the IP addresses we fetched from - * the ARP reply - */ - arp_neigh_update(bat_priv, ip_src, hw_src); - arp_neigh_update(bat_priv, ip_dst, hw_dst); - - /* if this REPLY is directed to a client of mine, let's deliver the - * packet to the interface - */ - ret = !is_my_client(bat_priv, hw_dst); -out: - /* if ret == false packet has to be delivered to the interface */ - return ret; -} - -bool dat_drop_broadcast_packet(struct bat_priv *bat_priv, - struct forw_packet *forw_packet) -{ - struct neighbour *n; - - /* If this packet is an ARP_REQUEST and we already have the information - * that it is going to ask, we can drop the packet - */ - if (!forw_packet->num_packets && - (ARPOP_REQUEST == arp_get_type(bat_priv, forw_packet->skb, - sizeof(struct bcast_packet)))) { - n = neigh_lookup(&arp_tbl, - &ARP_IP_DST(forw_packet->skb, - sizeof(struct bcast_packet)), - forw_packet->if_incoming->soft_iface); - /* check if we already know this neigh */ - if (n && (n->nud_state & NUD_CONNECTED)) { - bat_dbg(DBG_DAT, bat_priv, - "ARP Request for %pI4: fallback prevented\n", - &ARP_IP_DST(forw_packet->skb, - sizeof(struct bcast_packet))); - return true; - } - - bat_dbg(DBG_DAT, bat_priv, "ARP Request for %pI4: fallback\n", - &ARP_IP_DST(forw_packet->skb, - sizeof(struct bcast_packet))); - } - return false; -} - -void arp_change_timeout(struct net_device *soft_iface, const char *name) -{ - struct in_device *in_dev = in_dev_get(soft_iface); - if (!in_dev) { - pr_err("Unable to set ARP parameters for the batman interface '%s'\n", - name); - return; - } - - /* Introduce a delay in the ARP state-machine transactions. Entries - * will be kept in the ARP table for the default time multiplied by 4 - */ - in_dev->arp_parms->base_reachable_time *= ARP_TIMEOUT_FACTOR; - in_dev->arp_parms->gc_staletime *= ARP_TIMEOUT_FACTOR; - in_dev->arp_parms->reachable_time *= ARP_TIMEOUT_FACTOR; - - in_dev_put(in_dev); -} diff --git a/distributed-arp-table.h b/distributed-arp-table.h deleted file mode 100644 index 6c0acde..0000000 --- a/distributed-arp-table.h +++ /dev/null @@ -1,140 +0,0 @@ -/* - * Copyright (C) 2011-2012 B.A.T.M.A.N. contributors: - * - * Antonio Quartulli - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of version 2 of the GNU General Public - * License as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA - * - */ - -#ifndef _NET_BATMAN_ADV_ARP_H_ -#define _NET_BATMAN_ADV_ARP_H_ - -#ifdef CONFIG_BATMAN_ADV_DAT - -#include "types.h" -#include "originator.h" - -#include <linux/if_arp.h> - -#define DAT_ADDR_MAX ((dat_addr_t)~(dat_addr_t)0) - -#define ARP_HW_SRC(skb, hdr_size) ((uint8_t *)(skb->data + hdr_size) + \ - ETH_HLEN + sizeof(struct arphdr)) -#define ARP_IP_SRC(skb, hdr_size) (*(uint32_t *)(ARP_HW_SRC(skb, hdr_size) + \ - ETH_ALEN)) -#define ARP_HW_DST(skb, hdr_size) (ARP_HW_SRC(skb, hdr_size) + ETH_ALEN + 4) -#define ARP_IP_DST(skb, hdr_size) (*(uint32_t *)(ARP_HW_SRC(skb, hdr_size) + \ - ETH_ALEN * 2 + 4)) - -bool dat_snoop_outgoing_arp_request(struct bat_priv *bat_priv, - struct sk_buff *skb); -bool dat_snoop_incoming_arp_request(struct bat_priv *bat_priv, - struct sk_buff *skb, int hdr_size); -bool dat_snoop_outgoing_arp_reply(struct bat_priv *bat_priv, - struct sk_buff *skb); -bool dat_snoop_incoming_arp_reply(struct bat_priv *bat_priv, - struct sk_buff *skb, int hdr_size); -bool dat_drop_broadcast_packet(struct bat_priv *bat_priv, - struct forw_packet *forw_packet); -void arp_change_timeout(struct net_device *soft_iface, const char *name); - -/* hash function to choose an entry in a hash table of given size. - * hash algorithm from http://en.wikipedia.org/wiki/Hash_table - */ -static inline uint32_t hash_ipv4(const void *data, uint32_t size) -{ - const unsigned char *key = data; - uint32_t hash = 0; - size_t i; - - for (i = 0; i < 4; i++) { - hash += key[i]; - hash += (hash << 10); - hash ^= (hash >> 6); - } - - hash += (hash << 3); - hash ^= (hash >> 11); - hash += (hash << 15); - - return hash % size; -} - -static inline void dat_init_orig_node_dht_addr(struct orig_node *orig_node) -{ - orig_node->dht_addr = (dat_addr_t)choose_orig(orig_node->orig, - DAT_ADDR_MAX); -} - -static inline void dat_init_own_dht_addr(struct bat_priv *bat_priv, - struct hard_iface *primary_if) -{ - bat_priv->dht_addr = (dat_addr_t) - choose_orig(primary_if->net_dev->dev_addr, - DAT_ADDR_MAX); -} - -#else - -static inline bool dat_snoop_outgoing_arp_request(struct bat_priv *bat_priv, - struct sk_buff *skb) -{ - return false; -} - -static inline bool dat_snoop_incoming_arp_request(struct bat_priv *bat_priv, - struct sk_buff *skb, - int hdr_size) -{ - return false; -} - -static inline bool dat_snoop_outgoing_arp_reply(struct bat_priv *bat_priv, - struct sk_buff *skb) -{ - return false; -} - -static inline bool dat_snoop_incoming_arp_reply(struct bat_priv *bat_priv, - struct sk_buff *skb, - int hdr_size) -{ - return false; -} - -static inline bool dat_drop_broadcast_packet(struct bat_priv *bat_priv, - struct forw_packet *forw_packet) -{ - return false; -} - -static inline void dat_init_orig_node_dht_addr(struct orig_node *orig_node) -{ -} - -static inline void dat_init_own_dht_addr(struct bat_priv *bat_priv, - struct hard_iface *primary_if) -{ -} - -static inline void arp_change_timeout(struct net_device *soft_iface, - const char *name) -{ -} - -#endif /* CONFIG_BATMAN_ADV_DAT */ - -#endif /* _NET_BATMAN_ADV_ARP_H_ */ diff --git a/gen-compat-autoconf.sh b/gen-compat-autoconf.sh index 7ea42aa..7cf621b 100755 --- a/gen-compat-autoconf.sh +++ b/gen-compat-autoconf.sh @@ -38,7 +38,6 @@ gen_config() { # write config variables gen_config 'CONFIG_BATMAN_ADV_DEBUG' ${CONFIG_BATMAN_ADV_DEBUG:="n"} >> "${TMP}" gen_config 'CONFIG_BATMAN_ADV_BLA' ${CONFIG_BATMAN_ADV_BLA:="y"} >> "${TMP}" -gen_config 'CONFIG_BATMAN_ADV_DAT' ${CONFIG_BATMAN_ADV_DAT:="y"} >> "${TMP}"
# only regenerate compat-autoconf.h when config was changed diff "${TMP}" "${TARGET}" > /dev/null 2>&1 || cp "${TMP}" "${TARGET}" diff --git a/hard-interface.c b/hard-interface.c index 843caa7..ce78c6d 100644 --- a/hard-interface.c +++ b/hard-interface.c @@ -20,7 +20,6 @@ */
#include "main.h" -#include "distributed-arp-table.h" #include "hard-interface.h" #include "soft-interface.h" #include "send.h" @@ -113,8 +112,6 @@ static void primary_if_update_addr(struct bat_priv *bat_priv, if (!primary_if) goto out;
- dat_init_own_dht_addr(bat_priv, primary_if); - vis_packet = (struct vis_packet *) bat_priv->my_vis_info->skb_packet->data; memcpy(vis_packet->vis_orig, primary_if->net_dev->dev_addr, ETH_ALEN); diff --git a/main.c b/main.c index 9137aa0..083a299 100644 --- a/main.c +++ b/main.c @@ -268,8 +268,6 @@ static void recv_handler_init(void)
/* batman icmp packet */ recv_packet_handler[BAT_ICMP] = recv_icmp_packet; - /* unicast with 4 addresses packet */ - recv_packet_handler[BAT_UNICAST_4ADDR] = recv_unicast_packet; /* unicast packet */ recv_packet_handler[BAT_UNICAST] = recv_unicast_packet; /* fragmented unicast packet */ diff --git a/main.h b/main.h index 426a0d5..19e5881 100644 --- a/main.h +++ b/main.h @@ -67,15 +67,6 @@
#define NUM_WORDS BITS_TO_LONGS(TQ_LOCAL_WINDOW_SIZE)
-/* msecs after which an ARP_REQUEST is sent in broadcast as fallback */ -#define ARP_REQ_DELAY 250 -/* numbers of originator to contact for any PUT/GET DHT operation */ -#define DHT_CANDIDATES_NUM 3 -/* Factor which default ARP timeout values of the soft_iface table are - * multiplied by - */ -#define ARP_TIMEOUT_FACTOR 4 - #define LOG_BUF_LEN 8192 /* has to be a power of 2 */
#define VIS_INTERVAL 5000 /* 5 seconds */ @@ -120,9 +111,6 @@ enum uev_type {
#define GW_THRESHOLD 50
-#define DHT_CANDIDATE_NOT_FOUND 0 -#define DHT_CANDIDATE_ORIG 1 - /* Debug Messages */ #ifdef pr_fmt #undef pr_fmt @@ -136,8 +124,7 @@ enum dbg_level { DBG_ROUTES = 1 << 1, /* route added / changed / deleted */ DBG_TT = 1 << 2, /* translation table operations */ DBG_BLA = 1 << 3, /* bridge loop avoidance */ - DBG_DAT = 1 << 4, /* snooped arp messages / dat operations */ - DBG_ALL = 31 + DBG_ALL = 15 };
/* Kernel headers */ diff --git a/originator.c b/originator.c index c6a00b3..4114794 100644 --- a/originator.c +++ b/originator.c @@ -20,7 +20,6 @@ */
#include "main.h" -#include "distributed-arp-table.h" #include "originator.h" #include "hash.h" #include "translation-table.h" @@ -221,7 +220,6 @@ struct orig_node *get_orig_node(struct bat_priv *bat_priv, const uint8_t *addr) orig_node->tt_poss_change = false; orig_node->bat_priv = bat_priv; memcpy(orig_node->orig, addr, ETH_ALEN); - dat_init_orig_node_dht_addr(orig_node); orig_node->router = NULL; orig_node->tt_crc = 0; atomic_set(&orig_node->last_ttvn, 0); diff --git a/packet.h b/packet.h index 307dbb3..0ee1af7 100644 --- a/packet.h +++ b/packet.h @@ -25,22 +25,14 @@ #define ETH_P_BATMAN 0x4305 /* unofficial/not registered Ethertype */
enum bat_packettype { - BAT_IV_OGM = 0x01, - BAT_ICMP = 0x02, - BAT_UNICAST = 0x03, - BAT_BCAST = 0x04, - BAT_VIS = 0x05, - BAT_UNICAST_FRAG = 0x06, - BAT_TT_QUERY = 0x07, - BAT_ROAM_ADV = 0x08, - BAT_UNICAST_4ADDR = 0x09 -}; - -enum bat_subtype { - BAT_P_DATA = 0x01, - BAT_P_DAT_DHT_GET = 0x02, - BAT_P_DAT_DHT_PUT = 0x03, - BAT_P_DAT_CACHE_REPLY = 0x04 + BAT_IV_OGM = 0x01, + BAT_ICMP = 0x02, + BAT_UNICAST = 0x03, + BAT_BCAST = 0x04, + BAT_VIS = 0x05, + BAT_UNICAST_FRAG = 0x06, + BAT_TT_QUERY = 0x07, + BAT_ROAM_ADV = 0x08 };
/* this file is included by batctl which needs these defines */ @@ -168,12 +160,6 @@ struct unicast_packet { uint8_t dest[ETH_ALEN]; } __packed;
-struct unicast_4addr_packet { - struct unicast_packet u; - uint8_t src[ETH_ALEN]; - uint8_t subtype; -} __packed; - struct unicast_frag_packet { struct batman_header header; uint8_t ttvn; /* destination translation table version number */ diff --git a/routing.c b/routing.c index 4f2059f..840e2c6 100644 --- a/routing.c +++ b/routing.c @@ -962,18 +962,14 @@ int recv_unicast_packet(struct sk_buff *skb, struct hard_iface *recv_if) struct unicast_packet *unicast_packet; int hdr_size = sizeof(*unicast_packet);
- unicast_packet = (struct unicast_packet *)skb->data; - - /* the caller function should have already pulled 2 bytes */ - if (unicast_packet->header.packet_type == BAT_UNICAST_4ADDR) - hdr_size = sizeof(struct unicast_4addr_packet); - if (check_unicast_packet(skb, hdr_size) < 0) return NET_RX_DROP;
if (!check_unicast_ttvn(bat_priv, skb)) return NET_RX_DROP;
+ unicast_packet = (struct unicast_packet *)skb->data; + /* packet for me */ if (is_my_mac(unicast_packet->dest)) { interface_rx(recv_if->soft_iface, skb, recv_if, hdr_size); diff --git a/send.c b/send.c index 815cc9c..f47299f 100644 --- a/send.c +++ b/send.c @@ -20,7 +20,6 @@ */
#include "main.h" -#include "distributed-arp-table.h" #include "send.h" #include "routing.h" #include "translation-table.h" @@ -275,9 +274,6 @@ static void send_outstanding_bcast_packet(struct work_struct *work) if (atomic_read(&bat_priv->mesh_state) == MESH_DEACTIVATING) goto out;
- if (dat_drop_broadcast_packet(bat_priv, forw_packet)) - goto out; - /* rebroadcast packet */ rcu_read_lock(); list_for_each_entry_rcu(hard_iface, &hardif_list, list) { diff --git a/soft-interface.c b/soft-interface.c index b56dafd..6e2530b 100644 --- a/soft-interface.c +++ b/soft-interface.c @@ -22,7 +22,6 @@ #include "main.h" #include "soft-interface.h" #include "hard-interface.h" -#include "distributed-arp-table.h" #include "routing.h" #include "send.h" #include "bat_debugfs.h" @@ -137,7 +136,6 @@ static int interface_tx(struct sk_buff *skb, struct net_device *soft_iface) int data_len = skb->len, ret; short vid __maybe_unused = -1; bool do_bcast = false; - unsigned long brd_delay = 1;
if (atomic_read(&bat_priv->mesh_state) != MESH_ACTIVE) goto dropped; @@ -199,9 +197,6 @@ static int interface_tx(struct sk_buff *skb, struct net_device *soft_iface) if (!primary_if) goto dropped;
- if (dat_snoop_outgoing_arp_request(bat_priv, skb)) - brd_delay = msecs_to_jiffies(ARP_REQ_DELAY); - if (my_skb_head_push(skb, sizeof(*bcast_packet)) < 0) goto dropped;
@@ -221,7 +216,7 @@ static int interface_tx(struct sk_buff *skb, struct net_device *soft_iface) bcast_packet->seqno = htonl(atomic_inc_return(&bat_priv->bcast_seqno));
- add_bcast_packet_to_list(bat_priv, skb, brd_delay); + add_bcast_packet_to_list(bat_priv, skb, 1);
/* a copy is stored in the bcast list, therefore removing * the original skb. */ @@ -235,8 +230,6 @@ static int interface_tx(struct sk_buff *skb, struct net_device *soft_iface) goto dropped; }
- dat_snoop_outgoing_arp_reply(bat_priv, skb); - ret = unicast_send_skb(skb, bat_priv); if (ret != 0) goto dropped_freed; @@ -269,12 +262,6 @@ void interface_rx(struct net_device *soft_iface, if (!pskb_may_pull(skb, hdr_size)) goto dropped;
- if (dat_snoop_incoming_arp_request(bat_priv, skb, hdr_size)) - goto out; - - if (dat_snoop_incoming_arp_reply(bat_priv, skb, hdr_size)) - goto out; - skb_pull_rcsum(skb, hdr_size); skb_reset_mac_header(skb);
@@ -381,8 +368,6 @@ struct net_device *softif_create(const char *name) goto free_soft_iface; }
- arp_change_timeout(soft_iface, name); - bat_priv = netdev_priv(soft_iface);
atomic_set(&bat_priv->aggregated_ogms, 1); diff --git a/types.h b/types.h index 6474324..61308e8 100644 --- a/types.h +++ b/types.h @@ -27,17 +27,6 @@ #include "packet.h" #include "bitarray.h"
-#ifdef CONFIG_BATMAN_ADV_DAT - -/* dat_addr_t is the type used for all DHT addresses. If it is changed, - * DAT_ADDR_MAX is changed as well. - * - * *Please be careful: dat_addr_t must be UNSIGNED* - */ -#define dat_addr_t uint16_t - -#endif /* CONFIG_BATMAN_ADV_DAT */ - #define BAT_HEADER_LEN (ETH_HLEN + \ ((sizeof(struct unicast_packet) > sizeof(struct bcast_packet) ? \ sizeof(struct unicast_packet) : \ @@ -78,9 +67,6 @@ struct hard_iface { struct orig_node { uint8_t orig[ETH_ALEN]; uint8_t primary_addr[ETH_ALEN]; -#ifdef CONFIG_BATMAN_ADV_DAT - dat_addr_t dht_addr; -#endif struct neigh_node __rcu *router; /* rcu protected pointer */ unsigned long *bcast_own; uint8_t *bcast_own_sum; @@ -235,9 +221,6 @@ struct bat_priv { struct gw_node __rcu *curr_gw; /* rcu protected pointer */ atomic_t gw_reselect; struct hard_iface __rcu *primary_if; /* rcu protected pointer */ -#ifdef CONFIG_BATMAN_ADV_DAT - dat_addr_t dht_addr; -#endif struct vis_info *my_vis_info; struct bat_algo_ops *bat_algo_ops; }; @@ -411,9 +394,4 @@ struct bat_algo_ops { void (*bat_ogm_emit)(struct forw_packet *forw_packet); };
-struct dht_candidate { - int type; - struct orig_node *orig_node; -}; - #endif /* _NET_BATMAN_ADV_TYPES_H_ */ diff --git a/unicast.c b/unicast.c index e5c7999..74175c2 100644 --- a/unicast.c +++ b/unicast.c @@ -283,78 +283,13 @@ out: return ret; }
-static bool pull_and_fill_unicast(struct sk_buff *skb, int hdr_size, - struct orig_node *orig_node) -{ - struct unicast_packet *unicast_packet; - - if (my_skb_head_push(skb, hdr_size) < 0) - return false; - - unicast_packet = (struct unicast_packet *)skb->data; - unicast_packet->header.version = COMPAT_VERSION; - /* batman packet type: unicast */ - unicast_packet->header.packet_type = BAT_UNICAST; - /* set unicast ttl */ - unicast_packet->header.ttl = TTL; - /* copy the destination for faster routing */ - memcpy(unicast_packet->dest, orig_node->orig, ETH_ALEN); - /* set the destination tt version number */ - unicast_packet->ttvn = - (uint8_t)atomic_read(&orig_node->last_ttvn); - - return true; -} - -static bool prepare_unicast_packet(struct sk_buff *skb, - struct orig_node *orig_node) -{ - return pull_and_fill_unicast(skb, sizeof(struct unicast_packet), - orig_node); -} - -bool prepare_unicast_4addr_packet(struct bat_priv *bat_priv, - struct sk_buff *skb, - struct orig_node *orig_node, - int packet_subtype) -{ - struct hard_iface *primary_if; - struct unicast_4addr_packet *unicast_4addr_packet; - bool ret = false; - - primary_if = primary_if_get_selected(bat_priv); - if (!primary_if) - goto out; - - /* pull the header space and fill the unicast_packet substructure. - * We can do that because the first member of the unicast_4addr_packet - * is of type struct unicast_packet - */ - if (!pull_and_fill_unicast(skb, sizeof(*unicast_4addr_packet), - orig_node)) - goto out; - - unicast_4addr_packet = (struct unicast_4addr_packet *)skb->data; - unicast_4addr_packet->u.header.packet_type = BAT_UNICAST_4ADDR; - memcpy(unicast_4addr_packet->src, primary_if->net_dev->dev_addr, - ETH_ALEN); - unicast_4addr_packet->subtype = packet_subtype; - - ret = true; -out: - if (primary_if) - hardif_free_ref(primary_if); - return ret; -} - -int unicast_generic_send_skb(struct sk_buff *skb, struct bat_priv *bat_priv, - int packet_type, int packet_subtype) +int unicast_send_skb(struct sk_buff *skb, struct bat_priv *bat_priv) { struct ethhdr *ethhdr = (struct ethhdr *)skb->data; + struct unicast_packet *unicast_packet; struct orig_node *orig_node; struct neigh_node *neigh_node; int data_len = skb->len; - struct unicast_packet *unicast_packet; int ret = 1;
/* get routing information */ @@ -368,6 +303,7 @@ int unicast_generic_send_skb(struct sk_buff *skb, struct bat_priv *bat_priv, * returns NULL in case of AP isolation */ orig_node = transtable_search(bat_priv, ethhdr->h_source, ethhdr->h_dest); + find_router: /** * find_router(): @@ -375,26 +311,26 @@ find_router: * - increases neigh_nodes refcount if found. */ neigh_node = find_router(bat_priv, orig_node, NULL); + if (!neigh_node) goto out;
- switch (packet_type) { - case BAT_UNICAST: - prepare_unicast_packet(skb, orig_node); - break; - case BAT_UNICAST_4ADDR: - prepare_unicast_4addr_packet(bat_priv, skb, orig_node, - packet_subtype); - break; - default: - /* this function supports UNICAST and UNICAST_4ADDR only. It - * should never be invoked with any other packet type - */ + if (my_skb_head_push(skb, sizeof(*unicast_packet)) < 0) goto out; - }
unicast_packet = (struct unicast_packet *)skb->data;
+ unicast_packet->header.version = COMPAT_VERSION; + /* batman packet type: unicast */ + unicast_packet->header.packet_type = BAT_UNICAST; + /* set unicast ttl */ + unicast_packet->header.ttl = TTL; + /* copy the destination for faster routing */ + memcpy(unicast_packet->dest, orig_node->orig, ETH_ALEN); + /* set the destination tt version number */ + unicast_packet->ttvn = + (uint8_t)atomic_read(&orig_node->last_ttvn); + /* inform the destination node that we are still missing a correct route * for this client. The destination will receive this packet and will * try to reroute it because the ttvn contained in the header is less @@ -403,9 +339,7 @@ find_router: if (tt_global_client_is_roaming(bat_priv, ethhdr->h_dest)) unicast_packet->ttvn = unicast_packet->ttvn - 1;
- /* fragmentation mechanism only works for UNICAST (now) */ - if (packet_type == BAT_UNICAST && - atomic_read(&bat_priv->fragmentation) && + if (atomic_read(&bat_priv->fragmentation) && data_len + sizeof(*unicast_packet) > neigh_node->if_incoming->net_dev->mtu) { /* send frag skb decreases ttl */ @@ -417,6 +351,7 @@ find_router:
send_skb_packet(skb, neigh_node->if_incoming, neigh_node->addr); ret = 0; + goto out;
out: if (neigh_node) diff --git a/unicast.h b/unicast.h index e15aa62..a9faf6b 100644 --- a/unicast.h +++ b/unicast.h @@ -30,28 +30,9 @@ int frag_reassemble_skb(struct sk_buff *skb, struct bat_priv *bat_priv, struct sk_buff **new_skb); void frag_list_free(struct list_head *head); +int unicast_send_skb(struct sk_buff *skb, struct bat_priv *bat_priv); int frag_send_skb(struct sk_buff *skb, struct bat_priv *bat_priv, struct hard_iface *hard_iface, const uint8_t dstaddr[]); -bool prepare_unicast_4addr_packet(struct bat_priv *bat_priv, - struct sk_buff *skb, - struct orig_node *orig_node, - int packet_subtype); -int unicast_generic_send_skb(struct sk_buff *skb, struct bat_priv *bat_priv, - int packet_type, int packet_subtype); - -static inline int unicast_send_skb(struct sk_buff *skb, - struct bat_priv *bat_priv) -{ - return unicast_generic_send_skb(skb, bat_priv, BAT_UNICAST, 0); -} - -static inline int unicast_4addr_send_skb(struct sk_buff *skb, - struct bat_priv *bat_priv, - int packet_subtype) -{ - return unicast_generic_send_skb(skb, bat_priv, BAT_UNICAST_4ADDR, - packet_subtype); -}
static inline int frag_can_reassemble(const struct sk_buff *skb, int mtu) {
Hi,
I wanted to give some additional files that should help to make the revert a little bit easier.
revert-patches.tar.xz contains the separated revert-commit that produced the complete revert "batman-adv: Revert Distributed ARP Table"... so just in case somebody needs them.
readd_patches.tar.xz contains the patches that Antonio can use to create a new branch for dat based on batman-adv.git:next (applying the patch "batman-adv: Revert Distributed ARP Table" and then all patches in this tarball will create the same files as we have now in ccf1183f53baa879cd5a808dbb904f6053fa40f3)
merge.patch -- this is the patch that can be used to create the merge of next into merge _after all remaining namespace patches are applied_ and "batman- adv: Revert Distributed ARP Table" *is applied in next after ccf1183f53baa879cd5a808dbb904f6053fa40f3*.
$ git merge --no-commit -s ours next $ git apply --index merge.patch $ git commit
This is also the patch that ordex has to check to find out whether he has all things added after rebasing dat in the master branch (for example the counting added by Martin is not obvious). When he applies it on top of his branch and is back to the same state as without his patches... he should at least have all changes added again.
Kind regards, Sven
On Thursday 17 May 2012 18:23:33 Sven Eckelmann wrote:
Hi,
I wanted to give some additional files that should help to make the revert a little bit easier.
revert-patches.tar.xz contains the separated revert-commit that produced the complete revert "batman-adv: Revert Distributed ARP Table"... so just in case somebody needs them.
readd_patches.tar.xz contains the patches that Antonio can use to create a new branch for dat based on batman-adv.git:next (applying the patch "batman-adv: Revert Distributed ARP Table" and then all patches in this tarball will create the same files as we have now in ccf1183f53baa879cd5a808dbb904f6053fa40f3)
merge.patch -- this is the patch that can be used to create the merge of next into merge _after all remaining namespace patches are applied_ and "batman- adv: Revert Distributed ARP Table" *is applied in next after ccf1183f53baa879cd5a808dbb904f6053fa40f3*.
$ git merge --no-commit -s ours next $ git apply --index merge.patch $ git commit
I've attached the updated patch that is compatible with your changes in distributed-arp-table.c to my patches.
Kind regards, Sven
On Saturday, May 19, 2012 14:53:16 Sven Eckelmann wrote:
merge.patch -- this is the patch that can be used to create the merge of next into merge after all remaining namespace patches are applied and "batman- adv: Revert Distributed ARP Table" *is applied in next after ccf1183f53baa879cd5a808dbb904f6053fa40f3*.
$ git merge --no-commit -s ours next $ git apply --index merge.patch $ git commit
I've attached the updated patch that is compatible with your changes in distributed-arp-table.c to my patches.
Applied in revision 206af11.
Thanks, Marek
On Thursday, May 17, 2012 23:18:33 Sven Eckelmann wrote:
David S. Miller did not like the idea of batman-adv modifying and reading the ARP table and refused to pull this feature. It has to be rewritten after an acceptable solution was found.
This reverts following commits:
- batman-adv: add UNICAST_4ADDR packet type
- batman-adv: add a new log level for DAT debugging
- batman-adv: Distributed ARP Table - create DHT helper functions
- batman-adv: Distributed ARP Table - add ARP parsing functions
- batman-adv: Distributed ARP Table - add snooping functions for ARP
messages * batman-adv: Distributed ARP Table - increase default soft_iface ARP table timeout * batman-adv: Distributed ARP Table - add compile option
Applied in revision d5a6caf.
Thanks, Marek
b.a.t.m.a.n@lists.open-mesh.org